The flash from red to green/blue is a function of the "smart charger" testing the voltage level of your battery, to see when to stop putting current to the battery. You just may not have noticed it until now.
Full Answer
How to use Joyetech ego AIO vape?
To vape, turn the device on by pressing the fire button 5 times in quick succession, then hold the button while inhaling on the mouthpiece. The button light on the kit will flash 5 times to indicate that it is on. The AIO is turned off in the same way. 4. Replacing the coil Your Joyetech eGo AIO Kit comes with 2 coils.
How to charge ego AIO?
Simply charge eGo AIO by connecting it with a computer or a wall adapter (output: DC 5V) via USB cable. When it's fully charged, the button light will go out. eGo AIO presents you two forms of package: Standard kit and Easy package. The standard kit is a nice choice of gift for friends,
How do I use my AIO vape?
Using the device To vape, turn the device on by pressing the fire button 5 times in quick succession, then hold the button while inhaling on the mouthpiece. The button light on the kit will flash 5 times to indicate that it is on. The AIO is turned off in the same way.
How do I know if my ego AIO has a short circuit?
1, When the short circuit occurs before working, the button light flashes for 5 times and then powers off. 2, When the short circuit occurs while working, the button light flashes for 3 times before short circuit (reset). eGo AIO has a 15 second run time protection. The light will flash 10 times if the button is pressed for more than 15 second.
How do I know if my eGo AIO is charging?
Charging the battery Connect your AIO Kit to a computer using the USB charging cable included in the pack; you'll know when it's charged as the button light will go out.
How do you charge joyetech eGo AIO?
To charge your Joyetech eGo AIO Starter Kit, use the Micro USB cable included in the kit to connect it to the USB port on your computer or to a wall adaptor. You'll know it's fully charged because the LED on the button will switch off.
What does it mean when my eGo AIO blinks?
If you go to use the vape pen and the LED light is blinking while you are holding down the button, that is signaling one of two things - either your battery is dead OR it is not recognizing your atomizer. If you know that your device is definitely charged, check your coil.
How long does it take for a joyetech vape to charge?
It takes about 30-40 mins to charge the eRoll batter via the dedicated PCC, and please allow the battery enough time to fully charge. Check your security code to see if you have purchased the original Joyetech electronic cigarettes.
How do I fix my joyetech vape?
1:075:003 EASY Joyetech Cubis Spitback Fixes! Cubis, Cuboid Mini, and ...YouTubeStart of suggested clipEnd of suggested clipSo one tip is to just tip your mod upside. Down like so and then give it a little shake. So that aMoreSo one tip is to just tip your mod upside. Down like so and then give it a little shake. So that a liquid that's been sitting on the top of the coil.
How do I change the light on my eGo AIO?
To change the color of the LED lights, or turn off the light completely, turn the AIO off, press and hold the fire button until the light come back on. Cycle to the color you like, or stop when the light goes out, and back out of it.
Why is my vape flashing and not working?
When your battery is blinking white, that generally indicates that your battery is not fully connected. A loose battery can disrupt the flow of electricity, preventing your vape from fully charging. Thankfully, the fix is usually as simple as unscrewing your battery and reconnecting it.
How do you fix a short circuit on a vape?
Here are a few things to try to resolve atomizer short:Make sure the batteries are charging them properly by putting them in a separate charger.If using an RDA/RTA, check and see if the coil is touching the cap or deck.See if there are any breaks in the coil.Ensure that the coil is fully screwed into the tank.More items...•
Can you vape water in a vape?
Yes, obviously you can vape water since it's a liquid with a low evaporation point… and it won't produce any nasty chemicals.
How long does a eGo AIO take to charge?
Charging time for the 1500mAh battery is anywhere between one and two hours. The LED light encircling the firing button extinguishes when charging is complete. To change the color of the LED light inside the tank turn off the device by clicking the firing button five times.
How long do joyetech batteries last?
Joyetech state on their website that rechargeable Ni-MH batteries will give you approximately 800 puffs and regular AA batteries will last about 150 puffs.
How long does a eGo AIO last?
Your Joyetech eGo AIO battery's life will vary depending on usage. The AIO has a 1500mAh battery, which is above average capacity for a pen-style kit. A light vaper should find that their battery will last around a day or more; heavier vapers may need to recharge more often than this.
jcrazorson
so my ego aio isnt powering on or hitting anymore, not sure if the battery has any charge in it, seems nt since devive wont power on nor allow color change option.
Walt
Just read a post where the user found a reset button on the bottom of the thing and used a pen to press it. Per user, it fixed the problem. Sorry, no personal experience.
Egidux New Member
My ego aio not work. After 2h charging i unplug it and red light indicator start blinkink more than 10 times. And then nothing happens.
Baditude ECF Guru ECF Veteran
I'm admittedly not familiar with that mod. Perhaps you could download the owner's manual to find out what the flashing red light means. Ego EIO Manual download page.
How to turn on a vape?
To vape, turn the device on by pressing the fire button 5 times in quick succession, then hold the button while inhaling on the mouthpiece. The button light on the kit will flash 5 times to indicate that it is on. The AIO is turned off in the same way.
How to use Joyetech AIO?
Before using your Joyetech AIO for the first time, make sure the battery is fully charged. Connect your AIO Kit to a computer using the USB charging cable included in the pack; you'll know when it's charged as the button light will go out. 2.
What to do if Joyetech AIO battery is dead?
It won't charge/the battery is dead. If your Joyetech AIO battery is not charging, firstly try plugging it into a different USB port or wall socket. If this doesn't work, try a different charger, but make sure you are using a Joyetech AIO USB cable. If you have a spare kit, try charging the spare to rule out a faulty charger.
How to clear out e-liquid from a tank?
To clear out any excess e-liquid from within the coil head simply unscrew the top cap and coil, hold a piece of tissue under the coil and blow through the mouthpiece a few times. Make sure that the tank hasn’t been left upside down or horizontally for a long time, as this can cause e-liquid to leak.
How to fill a e-liquid tank?
To fill your tank, press down on the cap and twist to unscrew the top cap. Drip your e-liquid directly into the tank, making sure not to fill above the max fill line (2ml). If you fill your tank above this line, you'll find that the tank overflows when you try to replace the top cap and coil.
How long does it take for a vape to sit?
This happens when you attempt to vape when the tank is empty, or when you don't realise the e-liquid level has run low, or if the coil hasn't been primed (after refilling, drip a couple of drops of e-liquid into the coil, then allow the tank to sit for 10-15 minutes once the coil is in place).
Can an e-cigarette kit leak?
1. It's leaking#N#All e-cigarette kits can be prone to leaking, but given the right care and maintenance this can be avoided. Here are some tips that may help you avoid a leaking clearomizer:
