Breaking in coils - New coils that are heated too high can pop or break. E-liquid selection - E-juice high in sugar caramelizes the coil leading to a gunk buildup Coil burn outs are somewhat dependent on the type of device you use. Following the tips below to ensure that you are healthy and ready for your next vaping session.
Full Answer
Why does my vape coil pop when I vape?
It should be pretty loose after threading through the coil, because it will expand with juice. Maybe it's the silica. You might try cotton. Use a cotton ball, cheesecloth, or cotton year and see if that helps stop the popping and harsh vape. Just let the cotton soak for a few minutes before you vape it because it will burn.
Is it safe to build your own vape coils?
Your vape device uses electricity and there is a science behind building your own coils to fully understand so ensure that your build is safe! Doing something wrong may cause excessive heat or even explosions. Don’t worry though, this blog will explain how to make sure this does not happen.
What happens if you don’t have Wick in vape coils?
If there isn’t enough wick in your coils, too much juice can get into the chamber and cause leaking, gurgling and spitting when you try to vape. If you had too much wick, you might get some dry hits, but too little can lead to leaking.
Is your vape device popping and cracking?
Don’t worry, it’s not defective. A vape popping sound is normal for any device. Here are some quick, simple fixes. Some crackling and popping is normal every time you vape. Have you noticed the way heated water bubbles and pops? The action of heating liquid and turning it into vapor can cause the same reaction in your vape device.
Why does my vape coil keep popping?
As the e-liquid is vaporised it makes a slight popping or crackling sound. This will be slightly more noticeable if your atomizer head is brand new. If you hear your vape crackle, it actually means that it is performing well and your coil is doing what it needs to.
How do I stop my vape from popping?
This can be fixed easily: get some rolled up tissue paper, remove your drip tip and insert it down into the chimney of your tank. This soaks up the excess e-liquid reducing the chance of spitting and popping.
How do you Unflood a coil?
How do you fix a flooded coil?Flick the device to remove excess e-liquid from it.Blow through the tank in order to clear e-liquid from it. ... Remove the coil and leave it to dry on some tissue paper. ... Fire up the device without inhaling (but don't overdo it).More items...•
What wattage should I vape at?
On the contrary, even 10 watts is sufficient to guarantee a satisfying vape, which may be ideal for new vapers. As you become more experienced, it's safe to say that vaping starts to shine between the range of 40 and 50 watts.
Why does my vape pop?
The action of heating liquid and turning it into vapor can cause the same reaction in your vape device. If the vape popping sound is excessive, it can ruin your enjoyment of vaping. It could also be a signal that’s something is wrong with your device or your liquid. Here are the primary reasons your vape pops excessively.
How do you know if a coil is braided?
The Coil Is Twisted or Braided. You might like the flavor you get from a braided coil, but those braids can leave spaces in the coil. When you introduce e-liquid, it can seep through the braids or coils. You’ll know it’s happening by the hissing, popping sounds. If you braid the coil yourself, try tightening it.
How to get e-liquid into your mouth?
Take Short Inhales. Taking a log, deep inhale can force e-liquid into the chamber and into your mouth. If you repeatedly have this problem, you’re probably pulling too hard. Let the coil and the wick heat the liquid. Inhale gently. You’ll take in pure vapor and have a more enjoyable, flavorful vape.
How to clean e juice from chimney?
Here, the solution is simple. Remove your drip tip. Roll up some tissue paper, insert it into the tank and soak up the excess water. Regular cleaning will help you avoid this problem.
Can you use pod mods at low temperatures?
If you’re using a pod mod or another small device, you’re using lower temperatures. Your small device will work better with a thinner liquid that heats quickly at low temperatures. If you’re having trouble with popping, try switching to an e-juice that contains some VG.
Why is my vape juice sitting on my coils?
Vape juice that's been sitting on your coils is exposed to dust and bacteria. This applies especially to rebuildable atomizers. Dust is inevitable. The longer e-juice has been out of it's sealed bottle, the more prone it is to acquire dust and any other floating particles in the air over time.
Why does my vape coil burn out?
Chain vaping is when a vaper takes multiple draws within a small time frame. Taking multiple draws over a few seconds will dry out the wick faster than it can soak up e-juice.
Why does my new coil pop out?
Running high wattage through a brand new replacement coil will cause it to pop and immediately burn out, since the coil goes from having no current and heat to having extreme amounts of both.
How to fix a vape that tastes burnt?
So the best way to fix the burnt taste is by changing the coil, priming it properly, vaping at a lower wattage, or vaping lower VG juice.
What is a vapebox?
Vapebox is a subscription service that sends out new juice, vape starter kits, and atomizers every month. Every Vapebox is custom tailored to your flavor preferences. If you are interested in learning more or in receiving free vape juice, click the button below.
Why does sugar caramelize on vape coils?
High sugar content e-liquids can present a problem when it comes to long vaping sessions. When sugar is exposed to high heat, it'll instantly caramelize. Since e-liquid is only exposed to high heat on the coil, this means that some sugar will caramelize on the wick.
Why does my new coil taste burnt?
The most common reason why a new coil taste burnt is because it was not primed for enough time. Remember to prime the coil for at least 10 minutes and avoid high power vaping for the first puff. After it is primed and ready, set up your device at a low wattage range.
MJMcMahon Senior Member Verified Member ECF Veteran
I have run into similar issues that turned out to be a poor connection on one of the legs of the coil OR unequal leg lengths. One of the ways I discovered the poor connection was to remove the wick and fire the coil without wick in place. Make sure your coil is getting red from the center out.
wyetterp Super Member Verified Member ECF Veteran
I love the sound of that popping & crackling! It's the juice when it heats up. This is a good thing.
michliu Ultra Member Verified Member ECF Veteran
The harsh throat hit sounds like a hot spot. Wrapping around a 1/16" drill bit, 3/4 wraps of 28g should be way under 1 ohm and not firing on your twist. Even 5/6 will have you hovering around 1.0 ohms 5/6 wraps of 28g around a 3/32 drill bit gives me about 1.2 ohms. Next, sounds like wicking is the problem.
t8kiteasy Ultra Member Verified Member ECF Veteran
How close is the coil to the posts,if the coil is touching the post,or the top cap when you place it on to vape that will cause a harsh taste too.It does sound like you are getting too much space between your coil and wick though.I would suggest when wrapping,straighten out a paperclip place the wick you are going to use against the clip and wrap around that.I have found that,even with 3mm silica,after pulling the clip out,when the wick is wrapped,leaves just enough room for the coil and wick to come into contact..
michliu Ultra Member Verified Member ECF Veteran
If it's too loose, then use a paper clip or pin, place the silica along the pin, and wrap straight onto the silica. Removing the pin once you're done will give the silica room to expand. You're almost there.
BigLebowski Super Member ECF Veteran
I have found the microcoil idea to work much better on a loop of silica/ekowool rather than just one. Doesn't wick fast enough for the way I like to vape.
Borescoped Ultra Member Verified Member ECF Veteran
I have found the microcoil idea to work much better on a loop of silica/ekowool rather than just one. Doesn't wick fast enough for the way I like to vape.
Why do you have to change your coil?
This is one of the most common reasons you’ll have to change your coil regularly, because the build-up around the coil interferes with the flavor of your e-juice and the gunk in your wick affects its ability to soak up e-juice. The gunk is essentially residue from e-liquid that hasn’t been successfully vaporized.
How to get rid of coil gunk?
However, you can often reduce the effects of coil gunk by cleaning your atomizer head when it gets gunky . You can do this with hot water in many cases or strong grain alcohol (that you can drink – Everclear is a favorite but vodka works too).
What is coil gunk?
The gunk is essentially residue from e-liquid that hasn’t been successfully vaporized. Some components (often sweeteners or other ingredients from sweet flavors) are left behind, and as you continue vaping, these components are heated over and over again and turn dark. Sweeteners are particularly bad for creating coil gunk because they are heavy ...
Can you avoid vaping coils?
You can’t completely avoid it all the time unless you’re very careful about the juices you vape and how you vape them. Even if you’re absolutely careful, your coils will get gunked up eventually. However, you can drastically reduce the chance of getting coil gunk by taking some simple steps.
Can sweeteners vaporize?
The sweeteners don’t vaporize easily and can leave a residue on your coil, as explained in the previous section. Many NET e-liquids contain sweeteners, and if they haven’t been filtered well, some of the material from the steeping can lead to gunky coils too. This is why many NET e-liquids are bad for coil gunk.
Can you save a coil?
You might not be able to save the coil in every situation, but if it isn’t too bad you might be able to save yourself the purchase of a new coil or at least get more life out of your existing one. Switch to rebuilding: Using rebuildable atomizers has tons of benefits for reducing coil gunk.
Can you reduce gunk in coils?
Gunk Can Be Reduced, But Not Avoided Entirely. Following the advice in this post should help you get more life out of your coils and will reduce gunk in most cases. But it isn’t perfect, and for all your best efforts, your coils may still get gunky.
Why do multi strand coils pop?
Multi-strand coils often pop and spit due to their design. Twisted coils in particular have a bad reputation for this, but Clapton coils may have the same issue. Their design makes it easier for e-liquid to pool on the coil, and so sometimes it’s hard to entirely avoid popping on these coil types.
Why does my vape tank leak?
Leaking happens when e-juice escapes from your tank, usually through the airflow system. Depending on the reason behind it, leaking can range from a few drops of e-liquid, to having your tank emptying all of its contents all over your vape mod. It’s a common problem with even the most popular sub ohm tanks.
What happens if you inhale too much liquid?
If you inhale too forcefully, you risk bringing too much e-liquid into the coil, which may lead to leakage. Watch out when filling – Never overfill your tank. Always leave a small air pocket at the top when filling. This empty space will help prevent any liquid from leaking out.
How to remove e juice from a tank?
First make sure the threads are in sync and closed tightly, but not too tight. Find that sweet spot. If the threads are crossed, screw it back together carefully. Remove e-juice from chimney – All tanks have a central airflow tube that runs from the body of the tank up to the drip tip, known as the chimney.
Why does my tank leak out of the airflow holes?
Put a lid on it – If you leave a tank without the top cap, it will leak out of the airflow holes. That’s due to the pressurized nature of tanks. Make sure that your tank is empty if you plan on leaving your top cap off for extended periods of time—anything longer than it takes to fill it.
What does it mean when a juice tank is not airtight?
Check for cracks – Check your tank for cracks or other damage. A thin crack in the glass or a piece of bent metal can mean the tank is no longer airtight, allowing the juice to leak out and into the air hole valve.
How to prevent juice from leaking?
Sometimes if you’re in a hurry, you may cross-thread the top cap or forget to screw it together tight enough. This can cause juice to leak out of the openings.
What happens if your battery cannot support the watts your device is pumping out?
Knowing exactly what volts your battery output has is crucial for building, if your battery cannot support the level of watts your device is pumping out it may burn out your coil instantly or worse, make your battery blow up.
Is it cheaper to build coils?
Building coils are cheap as it allows you to mainly use your own tools and household items such as nail clippers and plyers, but for people who would be interested in getting a kit look at something similar to the coil master kit.
Is RDA good for vaping?
When you are ready for a vaping experience that is more professional and a serious attack on your cigarette addiction, an RDA is a great and effective choice. Always treat your RDA, and any device with such powerful batteries, with extreme care.
Why does vaping make you puff harder?
Unlike with smoking, puffing harder when you vape doesn’t usually get you more vapor, because it depends so much on how well your wick is working and how much airflow there is. If you do want to inhale more sharply, make sure you have good wicking (any sub ohm tank or rebuildable atomizer is a suitable choice) and keep the airflow wide open.
What to do if your vape tank isn't screwed in?
If a part of your tank wasn’t screwed in properly, this is much easier to fix: just screw it in properly, being sure to avoid cross-threading, and then fill up and vape as usual.
What happens when your wick gets gunked up?
The same effect happens when your wick has gotten gunked up from using coil-killing e-juices (usually dark-colored juices and dessert flavors). The wick loses its ability to soak up new e-juice and this leads to your coil getting flooded.
What does it mean when your atomizer is flooded?
Flooded atomizer coils are a fact of life for many vapers. The characteristic gurgling sounds or e-juice leaking from the airflow holes are both signs that e-liquid has flooded into your atomizer coil without being vaporized. As well as the irritation of gurgling and leaking, this can also lead to spitback, and generally makes your vaping ...
Why do old coils flood?
1 – Not Changing Your Coil or Wicks When You Need To. Old coils are particularly prone to flooding. As the wicks lose their ability to soak up e-juice, the liquid that does get pulled in isn’t absorbed properly and can flood the atomizer head. The same effect happens when your wick has gotten gunked up from using coil-killing e-juices ...
Why is my e juice leaking?
The most common cause of this is a damaged O-ring or a component of the tank that isn’t properly screwed in place and is leaving a gap that juice can leak through .
What happens if you fill your tank in the wrong way?
If you fill your tank in the wrong way, this can lead to your coil getting flooded. The most common mistake to make – and the one most likely to cause flooding – is getting e-juice down the central chimney. This leads directly to the coil, so if you get juice into the chimney you will flood your coil and probably end up with gurgling or leaking.
What Are Vape Coils?
Although commonly referred to as coils, they’re actually atomizer heads. The coil is an element inside the atomizer. But considering the diversity of vape lingo, we know exactly what you mean when you say coils.
Breaking Down the Anatomy of a Vape Coil
An atomizer head is where the energy from the e-cig battery gets converted. It also heats the coil inside, causing the vaporized e-liquid to soak into the wicking material, which you then inhale.
The Importance of Coil Resistance
The performance of your atomizer head will depend on its electrical resistance, which is measured in ohms. There are two categories of coils when it comes to their electrical resistance — low-resistance coils and high-resistance coils.
Do You Want a Micro Coil or Macro Coil?
When searching for different coil builds, you’ll most likely stumble upon two types — micro and macro coils. These types of coil builds are made by taking a small piece of wire and wrapping it around a screwdriver or a similar tool.
Single Coils vs Dual Coils
Some coil builds feature two coils instead of one, hence the name “dual coils.” Not all atomizers are designed to handle both, and those that do will usually provide better performance with one of the two options. Go through some trial and error, and experience the pros and cons of each type of coil.
Why You Should Consider Building Your Own Vape Coils
As mentioned, building your own vape coils saves you money on vaping. Rather than buying disposable coil heads every week and creating unnecessary waste, you can make a DIY coil that will not only last you longer but also eliminate the side costs included in the final price of a store-bought coil.
Simple Coil Building 101 for Vaping Beginners
Now that we’ve established the benefits of making your own simple coil for vaping, let’s move to the technical part of our guide. In the next section, we’ll elaborate on the necessary prep work.
