How to thicken vape juice?
This may be a bit of a challenge since most commercially sold vape juices are suspended in PG. Put it in a refrigerator. Placing your vape juice bottles in a refrigerator (especially during the summer) can significantly thicken them out. Thickening out vape juice is a pain (as you can see).
Why is my e-juice thick?
Long story short…. VG will be the main reason on why your E-juice is thick. The higher level of VG in your E-juice the thicker the juice will be. I Use a Clearomizer, Can I Still Use Higher VG Based E-Liquids?
Why is my vape juice leaking through the coil?
Firstly, as mentioned in the ‘E-liquid too thin’ section, if your vape juice isn’t thick enough then it may leak through your coil, especially if left on it’s side or upside down. Secondly, you might have flooded your tank.
What is vape juice viscosity?
All of this has to do with how thick – or thin – your sweet-tasting vape nectar is. This is called vape juice viscosity. And it can make or break your vaping experience. That’s why, in this post, we’ll focus on some of the things you can do to get that viscosity just right.
Is vape juice supposed to be thick?
Basically, it's why syrup is thick and water is a-flowin'. The higher the viscosity of an e-liquid, the worse the absorption properties get since it means that the liquid is too grimy to be absorbed the right way. Essentially, thicker juices can't carry flavor properly. But, they produce more vapor.
Which vape juice is thick?
Vegetable GlycerinVG stands for Vegetable Glycerin. It is a natural chemical, derived from vegetable oils, so is safe for vegetarians. It is commonly used in e-liquid to give a 'thick' sensation to vapor. VG has a slightly sweet taste and is considerably thicker than PG.
How do I fix thick vape juice?
If you want to thin out your e-juice, try adding 5-7% vodka. Be aware though that this will add a little throat hit to your e-juice.
How do you thin out vape juice?
0:372:335 Ways to Thin Out Thick E Juice - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou might think adding vodka is dangerous. But you might not realize that a lot of the flavorMoreYou might think adding vodka is dangerous. But you might not realize that a lot of the flavor concentrates that we use for vaping already have alcohol in them it's not a large amount alcohol. And not
Should a vape burn your throat?
Though it is very safe for consumption, it is known to cause some throat irritation when used in high concentration. To avoid a burning throat feeling when vaping, use an e-liquid with a lower PG and a higher Vegetable Glycerin (VG) content.
Can u put water in a vape?
Yes, obviously you can vape water since it's a liquid with a low evaporation point… and it won't produce any nasty chemicals.
Can I dilute vape juice?
How Can an E-Liquid Be Diluted? E-juice dilution can be accomplished in two ways based on the VG/PG ratio: With higher VG e-juices, adding a drop or two of distilled water is the way to go, because high VG e-liquid is rather thick due to the viscosity of vegetable glycerin. Thinning it then with water is fine.
Why is syrup thicker than water?
The higher the viscosity of an e-liquid, the worse the absorption properties get since it means that the liquid is too grimy to be absorbed the right way. Essentially, thicker juices can’t carry flavor properly. But, they produce more vapor.
Which is better, VG or pure vape?
High VG vape juices are better at producing thicker, better clouds. Pure VG is the best if you’re interested in cloud-chasing. However, if you take this route, you’re losing out on flavor. For better flavor, juices that are at least 50% PG tend to perform better.
What is the final ingredient in e-liquid?
Nicotine is the final and optional ingredient in an e-liquid. When you purchase a bottle of e-liquid, it is up to you to decide with how much (if any at all) nicotine will the liquid be diluted. Both naturally and synthetically produced types of nicotine are used.
What is aqueous glycerin?
Aqueous Glycerin (AG) This PG alternative is basically VG but diluted with 20% of distilled water. The benefit of adding AG to your liquid is that it will lower its viscosity to that of a 50/50 VG/PG liquid, which can definitely prolong your coil life and improve the smoothness of your vape.
What is VG in cooking?
Derived from vegetable oils, this natural chemical’s main role is to suspend other ingredients. VG is also called a base liquid (cause it’s usually one of two predominant ingredients, the other one being PG).
Is WFI a vape?
Water For Injection (WFI) Used frequently in medicine, WFI is sterilized and contains no additives. WFI can be found in local pharmacies, and there’s no danger in adding it to your vape juice (but keep it to a 4-6% mark).
Is vape juice full bodied?
But, a lot of times, it’s the feel of the vape juice that’s a bit… off. It doesn’t really fill up your lungs. It’s not full-bodied. Or it’s too full-bodied. All of this has to do with how thick – or thin – your vape juice is. This is called vape juice viscosity. And it can make or break your vaping experience.
Why is my E liquid so thick?
On the reverse side of your e liquid being too thin, your e liquid can be too thick for lower powered/pen-like devices. The coil isn’t being heated up enough for the e liquid to fully go through the tank, into the cotton, and finally to be vaporised. If you e liquid is too thick, you will notice that the e liquid will start to congeal ...
What happens if you use too thick liquid?
If you e liquid is too thick, you will notice that the e liquid will start to congeal around your coil and it will need replacing often. If you are using a pen-like device, stick to 50/50 ratios.
Why use PG in eliquid?
The reason eliquid manufacturers use PG is that it is very easy to vaporise! It is also used in asthma inhalers and fog machines among other food products. PG is a thiner liquid that allows the liquid to soak into the wick a lot faster. This allows you to vape quickly in succession without the wick drying out.
What is the best ratio for shortfill eliquid?
The standard ratio in Shortfill eliquids (50ml and above) is usually 70/30. This is usually as when a person becomes accustomed to vaping they will start to look for bigger bottles and a smoother vaping sensation. 70/30 also produces bigger and better clouds which are great for vaping tricks and all day vaping.
Why is VG good for vaping?
VG, because of its sweet nature, can be found in cough syrups, toothpaste, and baked foods. VG also provides a smoother vaping experience. More experienced vapers will be looking for high VG after quitting smoking for some time. The biggest benefit of a higher VG ratio is the cloud production!
What are the ingredients in E liquid?
There are two main ingredients in e liquid; vegetable glycerine and propylene glycol. These two ingredients make up nearly the entire bottle of your e liquid.
Why does PG and VG separate?
PG and VG as explained earlier do not naturally mix together for a long period of time. If the bottle is left alone for a while, the PG and VG will start to separate. This is also the case if the e liquid gets too warm or too cold as PG and VG react differently at different temperatures. If you notice that your e liquid keeps separating, simply ensure that the bottles stay at room temperature and give it a good shake every now and again.
SmokingBullet Super Member Verified Member ECF Veteran
So I get an order today and can't wait to try them. They were purchased at the recommended PG/VG mix by the supplier.
dormouse ECF Guru ECF Veteran
Carto? 50/50 may be too thick for a carto. I don't have much experience with cartos yet but I asked someone at Vapor Junction what a good ratio would be for their CE2 r4 cartos and he said he used 80/20 and he thought 70/30 might be good too?
guitardedmark Ultra Member ECF Veteran
for the most part 50/50 should work with a filler carto. For the ce2 it wont because ce2s suck! actually they dont at all. The wicking is terrible I use 50/50 for filler cartos (BOGE) and it works great!
Ardeagold Super Member Verified Member ECF Veteran
I vape a lot that's higher VG than PG. Never have had a problem. Is it possible you're flooding your carto or atty?
LMP Senior Member Verified Member ECF Veteran
It's not the ratio of VG to PG that is the problem, it's how much it's thinned.
LMP Senior Member Verified Member ECF Veteran
A little watter or alcohol would have improved the OP's vapor production quite a bit compared to what he is getting now!
guitardedmark Ultra Member ECF Veteran
water and alcohol never improve vapor production... It will thin the juice however.
Vaping Battery Safety
There have been many cases of mods exploding in user’s face, causing some severe injuries. This is often caused by an amateur cloud chasers not understanding their device. Never leave your battery charging unattended. Unattended batteries can end up causing your battery to explode or catch fire. An overcharged cell can have the same results.
Getting Huge Vape Clouds
The correct airflow will contribute to making your vape clouds bigger. If there isn’t enough airflow coming into the device, it can lead to overheating. If there is too much airflow to your mod, it will also affect how big your vapor clouds can be.
How to Make Vape Juice THICKER
Your choice in Mech Sauce e-liquid is another crucial part of creating the biggest clouds. E-liquid is made up of a combination of propylene glycol (PG), vegetable glycerin (VG), flavoring, and nicotine (though many e-liquids are nicotine-free). The correct mix of PG and VG will allow you to create massive clouds without having a harsh throat hit.
Getting the Best Mod for Huge Vape Clouds
The mod that you use is another important part of cloud chasing. You will want to find a mod that offers a high-quality, low resistance coil. An improperly made mod can overheat, explode, or even catch fire.
Best Vaping Technique for Vape Clouds
Your technique is an incredibly important aspect of huge cloud creation. Those with the biggest lung capacity will have an easier time creating huge clouds of vapor. When you exhale, exhale slowly to make your clouds appear bigger, thanks to slower dispersion.
ABSORBENT WICKING MATERIALS
Wicking is another critical aspect of cloud chasing. Inside of the atomizer, an absorbent wick helps your e-liquid get to the vaporizing coil. A wick that is more absorbent will help your juice reach the coil quicker, as well as allowing for a good amount of e-liquid to remain near the coil.
BUILDING YOUR OWN VAPE CLOUD DEVICE
Many cloud chasers choose to make their own devices. By using low-resistance coils and having the perfect airflow, you will create much larger vape clouds. There is no single best option when it comes to building your MOD, coils, or RDA/RBA, so you will have to experiment with it to find the perfect cloud chasing device.