A "protection" error message is rather odd. I assume it means the chip's protection circuitry has been triggered, but most chips are more specific to explain what the error is. Ie "ohms too low", "ohms too high", "high temp", "atomizer short", "low battery", etc.
Full Answer
Why won’t my vape work?
Simply put, if your mod can’t read your tank and coil resistance properly, it won’t be able to deliver power and therefore won’t work. In this quick guide you’ll learn how to fix this common annoyance and you’ll be back to vaping in no time!
Why does my vape mod keep saying Check atomizer?
While we all know a check atomizer message may be annoying, usually there is no cause for concern. The no atomizer message appears when your vape mod is unable to read the resistance level of your coil. ·The tank is not screwed inadequately.
What does it mean when my vape says shorted?
If your vape flashes up an error message saying shorted or something similar, it is telling you that there is an electrical short occurring. When an electrical short happens the built-in protection circuit on a regulated MOD will kick in, and this will stop your e-cigarette from working. This indicates...
What to do when your vape won’t fire?
Clean Your Contact Points The first step you should try if your pod vape isn’t firing or says check atomizer is cleaning out your contact points. Take the pod out of your pod vape and check the bottom of the pod for any dirt or ejuice. Also check inside your vape where the pod attaches to it.
What does protection mean on a vape?
A protected battery has a small built-in electronic board which is designed to protect the battery in certain situations, for example, it should not overcharge and it should cut out before overheating. Overheating a battery is bad for the battery and bad for coils, and will shorten their life.
How do you fix a short circuit on a vape?
Here are a few things to try to resolve atomizer short:Make sure the batteries are charging them properly by putting them in a separate charger.If using an RDA/RTA, check and see if the coil is touching the cap or deck.See if there are any breaks in the coil.Ensure that the coil is fully screwed into the tank.More items...•
How do I unblock my vape?
If the airflow holes appear clogged, attempt to clear them out with a needle, thin paperclip, or other skinny, sterile object. If your cart still keeps clogging, you may need to intermittently clear out the airflow holes with a needle and blow into the mouthpiece of the vape to force out residual oil.
Why is my vape device not working?
You may be experiencing connection issues between your battery and your tank/clearomizer, so take the device apart again and try reassembling it. Always make sure that you're not over-tightening the different parts of your vape too as this can easily damage them.
How do I reset my Smok vape?
Reset the tank - You can 'reset' the tank by removing it from the mod, checking the screws are tight and pressing the fire button. Then re-attach your tank and select “n” when you are asked if it is a new coil.
How do you fix a disposable vape that won't hit?
Sometimes, a disposable's failure to hit is simply due to an air bubble in the cartridge that's preventing airflow. If this is the case, try tapping or flicking the side of the cartridge a few times, as this should break it up.
Why is my cart pulling but not hitting?
The holes in the cartridge may be clogged with oil. Try warming your cartridge with a hair dryer (lowest heat setting) or by rubbing it between your hands to warm up the oil and change its viscosity. You can also poke a toothpick or safety pin gently in the hole to help de-clog it.
How long does it take for your lungs to heal from vaping?
After one to nine months: clear and deeper breathing gradually returns; you have less coughing and shortness of breath; you regain the ability to cough productively instead of hacking, which cleans your lungs and reduce your risk of infection.
What to do if you don't have an external charger for your vape?
If you do not have an external charger, then you will need to rely on your vape mod to identify the issue with your atomizer. If the batteries are the issue then either find the right coil resistance for the batteries (if they are not defective) and device being used or get a new pair of batteries.
What are the problems with vaping atomizers?
The three most common atomizer problems are: Atomizer short warning. Atomizer low warning. No atomizer found warning. Those are the warnings that will typically pop up when you run into issues with the coil.
What does it mean when your coil is low?
The coil is too low in resistance in the mod thus displaying the "atomizer low" message. blockquote An atomizer low warning means that the device does not support the atomizer's resistance. This means that your atomizer's resistance is too low and is thus not compatible with your mod.
Why is there no atomizer found?
If the warning is still there after trying to fix it then it could be an issue with the mod being used. A "no atomizer" warning almost always means the coil being used is dead or loosely seated .
Why does my atomizer give me a short message?
There could be a number of reasons why your device is giving you a short message. If you are using a rebuildable atomizer then your coil could be touching an unintended area like the deck or cap of the casing. If you are using a tank with a pre-built coil then the coil can either be defective or it could be loose.
How to fix an atomizer short?
How to fix an "Atomizer short" warning: Place batteries on an external charger to ensure they're both charging properly. For rebuildable atomizer users (RDA/RTA), make sure the coil is not touching the cap or deck and contains no breaks in your coil.
What is an atomizer in vaping?
Posted by Evelyn on August 8, 2019. Atomizers are the heart of vaping. Vape pens and mods are the power supply unit and the atomizers are responsible for vaporizing e-liquid. The term atomizer can refer to different things. It can refer to devices containing coils or it's also used to refer to the coil inside the device.
What does it mean when a vape mod says "Time Out"?
The message “Time Out” means that the length of your puff has exceeded what your vape mod’s puff timer will allow. Most vaping devices have built-in puff timers that help to prevent overheating. Suppose, for instance, that you’re carrying your vape mod in your pocket, and you’ve forgotten to lock it. You inadvertently push and hold the mod’s fire button when you sit down. Without a puff timer, that’s a potentially dangerous situation. With a puff timer, though, the device automatically cuts off, so its temperature stays in a safe range.
What does it mean when a vape mod says check atomizer?
The message “Check Atomizer” means that your vape mod isn’t detecting the connected atomizer coil at all. That may mean that the tank isn’t assembled correctly, that the tank doesn’t have a firm connection with the mod or that the coil itself has a problem. Use these steps to troubleshoot a “Check Atomizer” error.
What does it mean when a vape mod says it has a short circuit?
When your vape mod tells you that it has a short circuit, it means that something is critically wrong with the electrical circuit connecting the battery in your vaping device to the atomizer coil. You might get the “Atomizer Short” message, for instance, if unexpected metal-on-metal contact occurs inside your tank. For example, maybe the coil in your tank is cross-threaded, so the coil is seated a little higher in the tank’s base than it should be, and that’s causing the tank’s chimney to touch the heating wire inside the coil. A manufacturing defect in the coil can also cause a short circuit.
What does it mean when you see an error message on a mod?
If you see any of the above error messages on your mod, it means that the resistance of the connected atomizer coil isn’t within your device’s supported range. There are two likely reasons why you might see that error message.
What to do if your pod vape isn't firing?
If your pod vape isn’t firing, has a blinking LED and won’t fire, or says Check Atomizer or No Atomizer, you can follow a few of the same steps listed above for tanks: 1. Clean Your Contact Points. The first step you should try if your pod vape isn’t firing or says check atomizer is cleaning out your contact points.
How to clean a pod from a vape?
Also check inside your vape where the pod attaches to it. If you see any ejuice or dirt, clean it out with a paper towel then reinsert the pod and try again.
What to do if cleaning contact points doesn't fix check atomizer error?
If cleaning the contact points doesn’t fix the check atomizer error on your pod vape, you’ll want to carefully examine the contact pins/plates on your pod vape and on your pod for damage.
Why won't my 510 mod work?
Simply put, if your mod can’t read your tank and coil resistance properly, it won’t be able to deliver power and therefore won’t work.
What causes a check atomizer short?
Loose pieces of metal on the build deck will cause your mod to display “Check Atomizer” or “Atomizer Short”. Even very small pieces or trimmings of wire can cause a short or a check atomizer error on an RDA/RTA/RDTA. First, inspect the build deck closely for loose pieces of wire or other foreign objects.
What is a versed vaper?
The Versed Vaper team are a group of passionate and experienced vapers who take pride in writing helpful, quality content about vaping. From deals, to news and reviews, we've got you covered on all things vaping. Remember to subscribe to our newsletter, and follow us on Twitter, Instagram, and Facebook!
Why is my mod reading the new tank correctly?
If your mod is reading the new tank correctly, it could be a problem with the coil on your other tank. You might also want to clean the contact points on the tank that was giving you the error. If your mod is still reading “check atomizer” with a new tank, it’s probably a problem with your mod.