“Check Atomizer” or “No Atomizer” will appear when your vape mod or pod vape isn’t reading your coil correctly. This can be due to the 510 connector not reading properly (where the tank screws onto the mod), the coil not making proper contact inside of the tank, or possibly a short.
Why won't my vape work?
If your device isn’t firing, it might be because your battery isn’t sending power to your coil. If it’s a minor issue, this is the most obvious reason for a lack of vapor and is the simplest to solve. However, serious issues with batteries tend to mean you’ll need a replacement.
How do I know if my vape mod is working?
Check the 510 connection. Located on the bottom of your vape tank, the 510 connection is a small metal prong that must maintain proper contact for your mod to work. Try screwing your tank in a little bit tighter and clearing off any dust from the 510 connection and the connection point.
Why won’t my mod work?
This can be due to the 510 connector not reading properly (where the tank screws onto the mod), the coil not making proper contact inside of the tank, or possibly a short. Simply put, if your mod can’t read your tank and coil resistance properly, it won’t be able to deliver power and therefore won’t work.
How to fix a pod vape that won’t vape?
Ensure that you’re lining up the coil properly if there are any notches that need to be lined up and that the coil is snugly, firmly, and properly seated in the pod. If your pod vape uses a replaceable pod then you can try removing the pod, rotating it 180°, and reinserting it into your device.
How do you fix a vape that won't smoke?
Check your tank to make sure you have enough e-liquid. If your tank is completely full but you still have weak vapor, it is possible that your atomizer or coil has been flooded. If this happens, simply take your atomizer apart and clean it with a paper towel or gently blow through it to get the excess liquid out.
Why is my vape device not working?
Check if you've pressed the power button too often and turned it off. The majority of vape mods and batteries can be turned on and off by clicking the firing button a number of times in quick succession. Dependent on the brand of battery, this may be 3, 5 or 6 times - check your user manual for details.
How do I get my vape to work again?
The best way around this problem is to vape with one of your fingers around one of the inlet vents. This increases the airflow pressure and might get the sensors up and working again.
How do you reset a vape mod?
Reset the tank - You can 'reset' the tank by removing it from the mod, checking the screws are tight and pressing the fire button. Then re-attach your tank and select “n” when you are asked if it is a new coil.
Why does my vape feel like it's clogged?
The most common cause of a clogged cart is condensation buildup inside the cart's airway. Over time, this condensation can block the mouthpiece, preventing vapor from passing through as you take a hit. Instead of a tasty hit of delta 8 THC, you get a clogged mouthpiece and a mouth full of bitter vape juice.
Why is my puff bar blinking when I just got it?
Your Puff Bar Battery is Low or Dead You'll know that the battery is running low, though, until the blue light at the bottom of your Puff Bar begins to blink. The comfortable yet disposable design of the device means that if the battery is out, it's time to start looking at the latest flavors of the Puff Bar.
Why is my vape pen not working?
Some of the most common causes behind vape issues are dead batteries, leaky o-rings, and burned coils. Hopefully, this guide helped you diagnose the cause behind your vape pen problems. If you’re still feeling puzzled, it may be helpful to visit a vape store for assistance.
Why won't my vape pen turn on?
Won’t Turn On. If your vape pen doesn’t turn on, there could be several factors at play. A poor charger connection, a faulty charger, or a dead battery can all cause your pen to shut down semi-permanently.
What to do when your vape pen makes a gurgling sound?
When your vape pen starts to emit odd noises, the first thing you should do is turn it off and stop using it . The second thing you should do is check the tank for signs of flooding. Gurgling sounds often mean that the tank is too full.
What to do if your vape doesn't turn on?
Still, if your vape doesn’t turn on even after being connected to a power source, there’s one more thing you can try. Check your battery.
What to do if your vape is leaking?
If your vape uses a latching mechanism , check to ensure that the latch is in excellent condition.
What happens if your e-liquid tank is tight?
Over-tightening your tank can cause premature wear and tear that damages the o-rings.
How long after refilling e-liquid can you drag?
If you’re not allowing your e-liquid to permeate the wick, you might be doing yourself a foul-tasting disservice. Try waiting two minutes after refilling before taking a drag. However, the heating coil in your device may be close to burning out, causing your hits to taste like the worst batch of popcorn ever made.
Why does my vape stop working?
Other Issues That Cause a Vape to Stop Working. In general, a long list of problems can be caused by poor maintenance of your device. Just like any other piece of machinery, your vape device needs to be properly taken care of in order to function well.
What to do if atomizer doesn't work?
If that doesn’t work, check to make sure your atomizer coil isn’t dry, and that the atomizer itself isn’t flooded. Finally, make sure that the electrical connection between the atomizer and battery appears to be functioning correctly, cleaning off any dust or grime that may have built up.
Why does my e juice leak?
One of the top causes of leaking e-juice is a seal that is either cracked, missing, or just misaligned . Your device has several different seals, so examine all of them to see if you notice any crimping, damage, or looseness. Replacing these is an inexpensive fix, and can solve your leak problem altogether.
What is the downside of a glass juice tank?
The one downside to a glass reservoir is that it is more susceptible to cracking. Examine the tube carefully, looking especially closely at the end caps to see if there are any hairline fractures.
Why is my mod not producing vapor?
Mod Not Producing Vapor: Battery Problems. If your device isn’t firing, it might be because your battery isn’t sending power to your coil. If it’s a minor issue, this is the most obvious reason for a lack of vapor and is the simplest to solve. However, serious issues with batteries tend to mean you’ll need a replacement.
Why is my e-cigarette not producing vapor?
There are many potential reasons your e-cigarette might not be producing vapor, but they can be broken down into issues with your battery, connection problems, issues relating to your tank and road-blocks put up by the software on a mod. Generally speaking, you’ll be able to solve your problem without taking it into a vape store for a repair ...
How to fix a flooded coil?
Fixing a flooded coil is fairly simple: you can blow down through your mouthpiece to force the liquid out through the airflow holes (or invert your tank and blow through the airflow holes to force liquid out of the mouthpiece), or even just turn your device to a higher setting and clear the tank by vaping.
Why won't my e-cigarette fire?
The most obvious problems that could lead to your e-cig not firing are that your device isn’t switched on, that your battery isn’t charged or that your wattage setting is too low. Most devices switch on with three or five quick presses of the fire button, so try that first – usually an LED will flash or the screen will activate so you can see when it’s switched on. If this doesn’t work, the battery could be depleted, so try plugging your device into a charger (for mods with on-board charging or in-built batteries) or removing the battery and charging it separately (for devices with removable batteries).
How to tell if a mod is locked?
On mods with screens, there will likely be a padlock symbol or other sign to indicate that your device is locked. On vape pens, it might not be as easy to spot, but try clicking the fire button three or five times in quick succession, and look for a blinking LED to indicate that you’ve done something.
Why does my TC tank stop firing?
If your liquid isn’t reaching the wicks around the side of your coil head , you’ll need to fill up. You might also have this problem just after filling up, if the wick hasn’t had time to soak up the e-liquid yet.
Why is my battery dead?
Unfortunately, if your charger works and the problem doesn’t seem to be with the device itself, your battery could be dead. Over time, all batteries stop working, and if you’ve noticed that your battery hasn’t been holding its charge as well, this could be the cause of the issue.
Why is my vape not working?
If the vape appears to be on, but the display is dark, you may have accidentally activated “stealth mode.”. Quickly press the fire button three times to turn off stealth mode. If this doesn’t work, you may need to upgrade your firmware. Otherwise, the problem might be caused by screen damage or another related issue.
Why is my ohm error so high?
If you’re working with a rebuildable atomizer (RBA), the resistance of your coils may be too high or low. Adjusting the resistance will usually clear the error. Or, you may need to tighten the screws properly. Other reasons you may see an ohm error include: The resistance detection component of your device is broken.
What is the best brand of vape?
There’s no doubt that SMOK is one of the vape industry’s best brands, crafting top-of-the-line mods and pod systems like the SMOK Nord, SMOK Morph, SMOK NOVO, and so many more.
How to fix a coil that tastes burnt?
Here are a few suggestions for how to fix coils that taste burnt: Replace your coils when needed. Expect to replace coils every few weeks or so (or about 50mL of e-juice, according to SMOK guidelines). Burnt-tasting coils are usually the first sign that it’s time to switch them out for new ones.
Can you fix a dead vape mod?
Luckily, as just about any seasoned vaper will tell you, problems with a vape mod are often very easy to fix, being forced to replace a dead mod is a pretty rare occurrence. Often, a seemingly serious mod issue is simply the result of user error and can be resolved in next to no time.
2. Check if you need to charge it
If you think it should be charged, just double check that you are using the correct charger for your battery. Your battery will give you a signal to let you know that connection has been made and charging is in progress.
3. Check for connection issues
Check for connection issues. The terminal between your battery and your tank needs to be clean. Use a cotton bud to clear away any dust particles and gunked up vape juice.
4. Check our Battery Safety page
Review our comprehensive guide to battery safety to ensure you haven’t compromised your battery in any way.
1. Check your atomiser
Rotate your device whilst looking at the tank to see if it’s crooked. This is the most common reason for this message and is caused by the device being dropped, knocked, or transported in your pocket. If it is crooked, it may be repairable, or it may be time for a new tank
2. Check your 510 pin
If your tank has an adjustable 510 pin, make sure it’s adjusted to suit your mod.
3. Check your coil
Check your coil to see if it’s loose, or has vape juice clogging the connection at the base.
5. Clean your terminals
Clean the connecting terminals to ensure your atomiser is making contact with the mod.
Why is my vape not working?
Sometimes, a disposable vape that doesn’t hit isn’t working because the airflow sensor isn’t sensitive enough or because the sensor is blocked by condensation inside the device. If you cover one of the device’s intake vents with your finger ...
Why does my vape stop hitting?
The most common reason why a disposable vape stops hitting is because it’s simply out of e-juice. The average disposable vape contains enough e-liquid for up to 200 puffs, but the operative phrase there is “up to.”.
Why is my vape giving me weak hits?
If your disposable vape is giving you weak hits, one potential reason is that the nicotine strength simply isn’t right for you . Consider buying a device with a higher-strength e-liquid next time. If the device worked in the past and has suddenly become less satisfying, though – or you simply want to get a more intense hit from ...
How to stop vaping from overheating?
Slow down. You can also help to prevent overheating by ensuring that you never leave your device in direct sunlight or in your car. If you’re already maintaining a slow vaping pace, your device might simply be producing a burned flavor because it’s out of e-liquid.
How to get weak hits on a vape?
If you have a pod-based disposable vape, you might get weak hits if air bubbles form around the pod’s wicks. Tap the device gently on a table to break the air bubbles. After giving the wicks a few seconds to get wet, you should get some nice hits again.
Can you refill a vape?
If you want to refill your vaping device, you should buy a device designed for that. Before you try refilling a disposable vape, you should also know that, when the device is out of vape juice, the battery is also nearly dead – so you’ll probably end up wasting e-liquid.
Can an alkaline battery explode?
It's also possible that an alkaline battery will expand, leak or burst during recharging. The fact that it's possible doesn't mean the chemistry of the cell is intended for recharging. It is inherently unsafe to recharge a battery that's only designed for a single use. Don't even try it.
