It would change if you ordered extra sweetener, cold hit or extra flavoring. Adding more of any of those will make the liquid thinner. Also if you're using the heat in your house warmer than you ran the AC then it would also be thinner.
Can You thin out a vape juice?
Thinning out a vape juice (or thickening it) is not difficult, and it can make a huge difference. If you’re into cloud-chasing, go with high VG juices. If you’re into superb flavor, give that high PG a chance.
Why is my vape juice leaking through the coil?
Firstly, as mentioned in the ‘E-liquid too thin’ section, if your vape juice isn’t thick enough then it may leak through your coil, especially if left on it’s side or upside down. Secondly, you might have flooded your tank.
Why won’t my e-liquid vape?
The coil isn’t being heated up enough for the e-liquid to fully go through the tank, into the cotton, and finally to be vaporised. If you e-juice is too thick, you’ll notice it start to congeal around your coil and it’ll need replacing more often. If you’re using a pen-like device, stick to 50/50 ratios.
How does your Vape liquid affect your vaping experience?
How your liquid behaves has a major impact on how it feels when you’re vaping. High PG – thinner vape but with more of a throat hit. High VG – fuller vape, not so much throat hit. Liquids that are richer in VG have a smoother feel but a slightly weaker flavor.
Why is my vape so liquidy?
A vape spitting is most often a sign that the vape juice has overly saturated and flooded the coils. When you fire the atomizer, the vapor coming up through the flooded juice makes the liquid spit and jump up the chimney and through the mouthpiece.
Why are some vape juices thicker than others?
A major factor for why one bottle of e-liquid may be thicker than the next bottle you buy comes down to the amount of vegetable glycerin (VG) that is in the liquid. Vegetable glycerin is a natural and organic solvent that is made from vegetable oil.
What vape juice is thinner?
Aqueous Glycerin (AG) I've heard that it's much thinner than straight VG, but not as thin as PG. You would use this in place of PG. So if you're going for a 70vg/30pg mix, use 30% AG instead of PG. Some people will make this themselves, or you can buy it for pretty cheap online.
How can I make my vape juice hit harder?
For a Stronger Throat Hit:Use a higher-nicotine juice: More nicotine equals more throat hit. ... Choose a higher-PG blend: If you have a sub ohm device, a roughly 60:40 VG:PG mix is good, for a pod or basic vape kit you should aim for a bit more PG than that.More items...
How do I make my vape juice thicker?
Put it in a refrigerator. The best way to quickly solve this problem is to place your e-liquid products in a refrigerator (especially during the summer). Simply moving them away from room temperature can significantly thicken them.
How can I make my vape thicker?
Airflow. When chasing larger vape clouds, you want to maximise the airflow to your device. This increases the amount of air that gets to the coil - a fresh flow of air will encourage the vapour to condense into thicker clouds.
Why is my vape so weak?
If you vape again before the wick has sufficient time to refresh itself, you'll get a weak hit. When you use a disposable vape, the best way to ensure that you'll enjoy a satisfying hit every time is by waiting several seconds for the wick to refresh itself after each puff.
Why does it burn my throat when I vape?
Volatile Organic Compounds and Diacetyl. Vaping juices may contain volatile organic compounds or diacetyl, both of which are known to cause throat irritation. 10 If you are experiencing a sore throat, changing products or quitting vaping may help relieve your symptoms.
Why do I gag when I hit my vape?
“Free-base nicotine, which you get in a cigarette and an older-generation e-cigarette, is very alkaline and hard to inhale, so it triggers a gag reflex, which limits the amount of nicotine per puff,” he says.
The PG and VG
Before we delve into what makes a vape juice too thick or thin, we must first discuss its two major components: PG and VG.
The problem of "thin" and "thick" liquids
As you may have seen on many vape juice products, e-liquids come in different ratios. These ratios tell you the balance between PG and VG, meaning that if you see a 50/50 label, there's a one to one ratio of PG and VG inside. The ratio can affect the thickness or thinness of a liquid.
Addressing these problems
The best way to address these kinds of problems is to try out a different ratio of PG to VG. If you already love your vape juices or are trying to achieve a specific experience, you may need to consider changing your device.
Conclusion
Do not worry about running into juices that are too thick or too thin. More often than not, a simple change to a different ratio will do the trick. That said, take this as a learning experience. All vapers have run into these problems and have learned from them. These experiences will take you a step closer to achieve that perfect vape experience.
Why is my E liquid so thick?
On the reverse side of your e liquid being too thin, your e liquid can be too thick for lower powered/pen-like devices. The coil isn’t being heated up enough for the e liquid to fully go through the tank, into the cotton, and finally to be vaporised. If you e liquid is too thick, you will notice that the e liquid will start to congeal ...
What happens if you use too thick liquid?
If you e liquid is too thick, you will notice that the e liquid will start to congeal around your coil and it will need replacing often. If you are using a pen-like device, stick to 50/50 ratios.
Why use PG in eliquid?
The reason eliquid manufacturers use PG is that it is very easy to vaporise! It is also used in asthma inhalers and fog machines among other food products. PG is a thiner liquid that allows the liquid to soak into the wick a lot faster. This allows you to vape quickly in succession without the wick drying out.
Why is VG good for vaping?
VG, because of its sweet nature, can be found in cough syrups, toothpaste, and baked foods. VG also provides a smoother vaping experience. More experienced vapers will be looking for high VG after quitting smoking for some time. The biggest benefit of a higher VG ratio is the cloud production!
What are the ingredients in E liquid?
There are two main ingredients in e liquid; vegetable glycerine and propylene glycol. These two ingredients make up nearly the entire bottle of your e liquid.
Why does PG and VG separate?
PG and VG as explained earlier do not naturally mix together for a long period of time. If the bottle is left alone for a while, the PG and VG will start to separate. This is also the case if the e liquid gets too warm or too cold as PG and VG react differently at different temperatures. If you notice that your e liquid keeps separating, simply ensure that the bottles stay at room temperature and give it a good shake every now and again.
Can you use 50/50 E liquid?
If your e liquid is too thin then you will go through your e liquid even quicker. Whilst 50/50 e liquids can be used in high powered devices, you are better using a thicker e liquid such as a 70/30 ratio.
dannyv45 ECF DIY E-Liquid Guru Verified Member ECF Veteran
Hmm not really. Did you contact the vender and explain the problem to them?
Chornbro Ultra Member Verified Member ECF Veteran
VG is so, incredibly thick. I've seen some "100% VG" stuff that is pretty paper thin. Makes me wonder if they're either falsely advertising or watering the stuff down. VG + water != 100% VG
Why do vapes have bigger clouds?
Increasing the device's airflow can also result in bigger clouds. When more air is flowing through your vape, the coil's temperature is kept low and this creates a cooling effect that aids the condensation process. Again, we will look at a device with adjustable airflow later.
How to get thick clouds on a vape?
1. Look at Your Device's Power. In short, the higher the voltage of your device's battery, the more intense your vaping experience will be, and the bigger your vape clouds will be, too. If you have a device with a low voltage (e.g. traditional e-cigs and basic vape pens) then you may struggle to get thick clouds.
What is the ratio of vape clouds?
A huge factor when it comes to vape clouds is the PG:VG ratio present in the e-liquid you are using. Depending on the e-liquid, you could see ratios of 50:50, 80:20, and 40:60, for example.
What is the difference between VG and PG in vape?
As a general rule of thumb, an e-liquid that has a higher ratio of VG to PG will produce thicker vape clouds whereas an e-liquid with a higher ratio of PG to VG will deliver a harsher throat 'hit'. Some e-liquids are available with 100% VG. These are designed especially for people who want to produce the thickest vape clouds.
Why do people call vapour smoke?
Many people call vapour 'vape smoke' because it looks like cigarette smoke, however, the two could not be any more different .
What is smoke in science?
Smoke is "a visible suspension of carbon or other particles in the air, typically one emitted from a burning substance" by its literal definition. To create smoke, you need to combust (burn) something. When combustion takes place, oxidation creates new chemicals and other by-products.
What is a vapor?
Vapour vapor is "a substance diffused or suspended in the air, especially one normally liquid or solid" by definition and materially different to smoke. Chemicals found in vapour are the same as those found in the substance that has been vaporised.
Can you use vodka to clean coil heads?
It’s generally considered safe and is actually why many people suggest soaking old coil heads in vodka to clean them and reuse them . If you want to thin out your e-juice, try adding 5-7% vodka. Be aware though that this will add a little throat hit to your e-juice.
Is vodka bad for vaping?
You might think adding vodka is dangerous, but you might not realize that a lot of the flavor concentrates that we use for vaping already have alcohol in them. It’s not a large amount of alcohol and not all flavors have alcohol, but if you vape, you’ve probably vaped e-juice that has alcohol.
Tank Is Assembled Incorrectly or Has Worn Seals
One of the reasons why vape tanks are usually so good at holding e-liquid is because their reservoirs are tightly sealed by metal threading and rubber or silicone gaskets. Those design elements create a seal that allows the tank to maintain an internal vacuum.
Vaping Device Is Being Stored on Its Side
Many vape tanks can’t maintain airtight seals during long-term storage unless they’re stored upright – so if you won’t be using your vaping device for several hours, you should avoid storing it on its side during that time.
E-Liquid Is Leaking Through a Faulty Coil Assembly
The coil assembly is the most important part of any vape tank – not just because it’s the component that generates vapor, but also because it regulates the flow of air and e-liquid in the tank. The Chinese factories that make vape coils are exceptionally good at what they do.
E-Liquid Is Too Thin
Most full-sized vape tanks are designed to work with fairly thick e-liquids because thicker e-liquids produce thicker vapor clouds. An e-liquid’s thickness varies depending on the amount of vegetable glycerin (VG) and propylene glycol (PG) it contains. That’s why most e-liquid bottles have their VG/PG ratios printed on their labels.
Tank Is Leaking Due to Air Pressure Changes
The final thing to look out for when troubleshooting a leaking vape tank is a change in the surrounding environment. In particular, a rapid increase in elevation is likely to make your tank leak. That’s because the air in the tank expands. The air pushes on the e-liquid, forcing it through the tank’s coil assembly and out the bottom airflow vents.
The Pg and VG
- Before we delve into what makes a vape juice too thick or thin, we must first discuss its two major components: PG and VG. PG stands for propylene glycol and is an organic compound that does not have any colour or smell. Its primary use in e-liquids is its ability to vaporise easily, making it a good carrier of flavours. Plus, PG is thin, meaning t...
The Problem of "Thin" and "Thick" Liquids
- As you may have seen on many vape juice products, e-liquids come in different ratios. These ratios tell you the balance between PG and VG, meaning that if you see a 50/50 label, there's a one to one ratio of PG and VG inside. The ratio can affect the thickness or thinness of a liquid. For instance, liquids with higher PG will be much thinner, and higher VG liquids will be much thicker. …
Addressing These Problems
- The best way to address these kinds of problems is to try out a different ratio of PG to VG. If you already love your vape juices or are trying to achieve a specific experience, you may need to consider changing your device. For instance, if you want to create thick plumes, you will need high-VG e-liquids paired with a much more powerful vape device. The same goes for more flavo…
Conclusion
- Do not worry about running into juices that are too thick or too thin. More often than not, a simple change to a different ratio will do the trick. That said, take this as a learning experience. All vapers have run into these problems and have learned from them. These experiences will take you a step closer to achieve that perfect vape experience. Also, do not be afraid to experiment. You will nev…