Why is my vape pen button red?
Vape pen blinking red Some of your devices will blink red under different situations, and each situation has a different meaning. If the pen blinks red when vaping, it's a sign your battery is going low (below 30%), and it's time to recharge it.
What do the colors on my vape pen mean?
Battery and Cartridge Basics The v1 has three heat settings denoted by different colors– green is low, blue is medium and red is high. To adjust the heat level, press the button three times, and the color will change along with the setting. For the best flavor and oil longevity, we recommend using your v1 on low heat.
Why is my vape battery charger red?
Occasionally, the charger might show blinking red right to indicate bad batteries. There are several ways to restore batteries that cannot be charged by the charger. If the light blinks red within five seconds after battery insertion, then the battery voltage is too high.
What color do vape pens turn when charged?
greenThe light on the battery and charger should illuminate, letting you know that it's charging up. Once the light on the charger turns green, the battery is fully charged and ready to use.
Why does my vape blink 3 times?
Certain batteries will flash 3 times to indicate a short circuit. Most standard e-cig batteries will have what's called short circuit protection, so when there is a short and you press the fire button it will just blink 3 times and then won't do anything.
Does red light mean charging?
A red light comes on to indicate fast charging of the battery.
How do I get my vape to work again?
Break Air Bubbles. If you have a pod-based disposable vape, you might get weak hits if air bubbles form around the pod's wicks. Tap the device gently on a table to break the air bubbles. After giving the wicks a few seconds to get wet, you should get some nice hits again.
How do I know if my vape is charged?
Once the light on your screen turns green you know it is fully charged and ready to be used. Avoid charging your vape pen longer than necessary, since this can wear out your battery sooner.
Why is there an LED light behind my vape?
You may want to know that the LED light behind your vape’s fire button is used by most manufacturers to give you any warnings or signals that could interfere with your vaping experience , especially if the device doesn’t have a digital display.
Why does my vape pen blink?
8 Reasons Why Vape Pens Blink. 1. Low or Dying Battery. The most common reason for a flashing light on your vape pen is to indicate that your battery is running low. When there is not enough power coming from the battery, your vape will give a blinking light (a red light with some devices) to let you know it needs to be charged.
What to do if your vape connectors are skew?
If any liquid has gotten on the connectors, or any of the threading is skew, it might be stopping your device from making a proper connection. With clean hands and on a clean surface, try taking apart the various parts of your vape and wiping them with a dry cloth or tissue. Then, reassemble it and try to have a hit. 5.
How to stop vape from firing?
To test if this may be the issue with your vape, press the fire button three times in quick succession, then give it another go.
What happens if you drop a vape?
If at any point your vape has been dropped, the impact may have dislodged some of the smaller components inside your device . The more common of these is the connection between the battery mod and the tank: the 510 pin.
Why is my fire button stuck?
Unfortunately, like most electronics, vape devices do have some weaker components, mainly, the firing button. Because of general wear and tear or because some liquid leaked underneath, your fire button may become stuck.
Why is my coil shorting?
If you’re building your own coils, or even if you’re buying stock coils, there’s a chance that they are causing a short in your device. If the resistance is too low or the coil has been damaged, it will immediately send an error message to your device which then flashes the warning to you.
Cannabis oil has high viscosity and the concentrate may become stiff. When cannabis oil is cold or settled to one side of the cartridge, it may fail to flow correctly. To fix this, apply heat to the cart. Heating up the cart lowers the viscosity of the cannabis oil, which allows it to flow when you pull
A common solution for freeing up your settled cannabis oil involves using a hairdryer to heat the cart. Separate the cart from the battery and set the cart upright. On its low setting, hold a hairdryer about six inches away from the cart. Apply heat for about 30 seconds. When you see bubbles forming, let the cart sit for a few seconds.
Oil amounts appear low in cartridges
Sometimes when you purchase a vape cartridge, the oil level looks much lower than you thought it would be. If your oil level looks low, it could mean your oil has settled on one side. To resolve this problem, apply heat to the sides of the cart with a hair dryer method mentioned above and check to see if the oil level appears higher than it was.
Why does my vape pen taste burnt?
If your vape pen produces an unpleasant burnt taste the reason could be either your vape pen’s temperature control is set too high, or the heating coil has residue on it . If your battery’s temperature is adjustable (a feature found in rechargeable vape pens), you can adjust it to a lower setting using its multi-click functions. Start by rapidly pressing button 5 times to turn it on, then press the button rapidly 3 times to alternate between low, medium and high temperatures. If it’s a problem with dirty heating coil, clean it with a cotton bud.
Why does my vape pen leak?
Leaving your vape pen in the car during hot weather can also cause the cartridge to leak. That’s because the cartridge seals expand and creating a passage for vape juice to leak out. Drawing too frequently on your vape pen, known as chain vaping, can also weaken the cartridge seals, causing vape juice to leak out.
Why is my vape pen not producing vapor?
The most likely reason for this is that the firing pin doesn’t have proper contact with the battery, which can happen when the cartridge is screwed in too tight.
How many times do you have to press the button to turn on a vape pen?
You usually have to click the button five times to turn on the battery. When taking a hit, ensure you hold the button down, otherwise you won’t be able to draw.
Why does my battery light purple?
Battery flashes a purple light 3x when you connect a cartridge. This is to prevent a short circuit that occurs from the cartridge being screwed on too tightly. Try cleaning the electrodes on both the battery & cartridge. If this doesn’t work slowly unscrew the cartridge to see when then button turns solid.
How to remove air bubbles from a cartridge?
One way to remove air bubbles is heating the cartridge with a hair dryer set at a low temperature.
What causes a short circuit in a battery?
Short circuit. Clean the electrodes on your battery, there is likely debris that has caused a temporary short. Cartridge is clogged, nothing happens when you pull. Depending on how it was put away or when it was used last there may be some some oil residue in the air hole.
