Full Answer
Why is my vape tank stuck?
The most common culprit of a stuck tank is over-tightening or loosening e-liquid, causing a jam. How do I Get My Vape Tank Unstuck?
Why is my vape pen not vaping?
Some of the most common causes behind vape issues are dead batteries, leaky o-rings, and burned coils. Hopefully, this guide helped you diagnose the cause of your vape pen problems. If you’re still feeling puzzled, it may be helpful to visit a vape store for assistance. Using a vape pen incorrectly could cause injury, so always use caution.
Why is my vape pen gurgling?
When your vape pen starts to emit odd noises, the first thing you should do is turn it off and stop using it. The second thing you should do is check the tank for signs of flooding. Gurgling sounds often mean that the tank is too full.
How to fix a leaking vape tank?
Your favorite pair of jeans and your comfiest t-shirts are bound to thank you. The first thing you can do when dealing with a leaky tank is checked to make sure that the tank is fully screwed into the mouthpiece. If your vape uses a latching mechanism, check to ensure that the latch is in excellent condition.
How do you put a vape tank back together?
Once you've filled your tank, screw the top connector and mouthpiece back on. Then, put the coil back in and screw the base back on to fully reassemble your vaporizer. Wait 2-3 minutes before you use the vaporizer. After you've put all of the pieces back together, give the coil 2-3 minutes to saturate.
Why is my vape tank not working?
Reseat your Coil/Pod If your pod vape uses replaceable coils you can try removing the coil and reinserting it into the pod. Ensure that you're lining up the coil properly if there are any notches that need to be lined up and that the coil is snugly, firmly, and properly seated in the pod.
Why is my vape tank stuck?
It usually occurs as a result of over-tightening, bad threading, or incapacity to perfectly grip the vape tank and swivel it open. For most of us, the obvious things we do when we tinker with our vapes are refilling when the tank dries, cleaning, charging dead batteries, and changing faulty batteries.
How do you fix a hard to pull on a vape?
Drawing hard when you vape causes the wicks to absorb more concentrate than the coil can vaporize. Excess oil floods the tank and clogs the airflow holes. The fix: Take your vape pen apart carefully and clean the threading on the battery, the tank, the air holes, and the mouthpiece.
How long does it take for your lungs to heal from vaping?
After one to nine months: clear and deeper breathing gradually returns; you have less coughing and shortness of breath; you regain the ability to cough productively instead of hacking, which cleans your lungs and reduce your risk of infection.
How do I know if my vape is broken?
5 Signs That Show It's Time To Change Your Vape CoilYour Vape Tastes Burnt. This is probably the most noticeable thing that tells you your coil needs replacing, and something most vapers will experience. ... Your E-Cigarette Is Gurgling. ... Your Vape Tastes 'Strange' ... Your Coil Is Used Up. ... E-Cigarette Leaks.
How do you open a stuck tank?
Rubber gloves: Put on a pair of washing up gloves and try to unscrew the tank with them on. They increase grip and make it much easier. Rubber bands: Wrap a rubber band around the metal part of the tank. The increased grip will make it easier to unscrew in your hands.
How do you assemble a vape pen?
How do I put together the oil vaporizer pen?Check to make sure battery is fully charged.Examine battery contact head (the top of the battery that connects to the cartridge) for any debris. If there is debris, clean it before use.Attach battery to oil vaporizer cartridge.Connect mouthpiece to cartridge.
How do you open a Smok tank?
0:143:24SMOK Tank | How to take apart & clean - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf you want to change out your coil. You hold it tight here unscrew your bottom as you can seeMoreIf you want to change out your coil. You hold it tight here unscrew your bottom as you can see there's no ring right in here always make sure it's on correctly.
Why does my cart not pull?
One of the most common reasons for a cartridge to stop pulling is due to the oil being too thick. This may cause the holes in the cartridge to become clogged and make it hard to pull. In the event that this happens, first, check if your cartridge is glass or plastic.
How do you smoke vape oil without a vape?
1:332:23*EASY*how to vape without a battery/ pen/boxmod - YouTubeYouTubeStart of suggested clipEnd of suggested clipDevice your cartridges your vape cartridge. You're gonna stake the black wire into the hole. AndMoreDevice your cartridges your vape cartridge. You're gonna stake the black wire into the hole. And then once you get that and you're gonna use the red wire and touch it to the side of the thing.
How do you fix a flooded vape tank?
Clear The Flooded TankUninstall your tank from your device.Wrap the base of the tank in a paper towel to avoid any messes.Blow any excess eLiquid through the mouthpiece and out of the airholes into the paper towel.Finally, thoroughly clean the tank with a Q-Tip until dry.
Why is my vape tank jammed?
Vape Tank Jam. In the case of jammed vape tanks, the primary cause is over-tightening. An over-tightened vape tank will be difficult to turn with your bare hands, so the best course of action is to find a material that can grip the tank better than you can.
What happens when you get stuck in vape setup?
Stuck parts can happen to multiple different pieces of your vape setup. The mods and accessories that bring you a powerful vaping experience can be applied incorrectly or damaged during use. This can happen in multiple different parts of custom vape set-ups, as users have many parts to screw, unscrew, and replace over the lifetime of the device. ...
How to stop a vape from getting stuck?
How to Stop Your Vape Tank From Getting Stuck. Make sure you are only tightening your tank enough to prevent leakage, as overtightening can lead to stuck parts. Having to retighten a tank is better than having to replace a setup. If parts of your device end up permanently broken and you need to purchase a new tank, ...
What happens if you unscrew the tank?
If you are having trouble unscrewing the tank to replace e-liquid, you are dealing with a tank jam. However, if you are having trouble detaching the tank from your device, you need to unstick the tank.
What to do if your tank is stuck?
If your tank is truly stuck, prepare for some more fragile pieces to break in the process of fixing your tank. If you are still unable to fix the stuck tank, you may need to decide between getting an entirely new device or breaking a portion to get them apart.
Can you remove a tank stuck to a mod?
In some cases, your tank may simply be stuck to your device. This is a bit riskier since a botched fix would require more than simply a replacement tank. When attempting to remove a tank stuck to a mod, take care to avoid injuring the device or yourself via the battery.
RCP1991 Senior Member ECF Veteran
I have an Innokin Coolfire TC 100 and I've noticed that my tanks are not screwing down all the way into the mod which isn't an issue I've encountered in the past. There is probably about 1 cm of space in between the connection where the tank used to sit flush.
Eskie ECF Guru Verified Member ECF Veteran
I have an Innokin Coolfire TC 100 and I've noticed that my tanks are not screwing down all the way into the mod which isn't an issue I've encountered in the past. There is probably about 1 cm of space in between the connection where the tank used to sit flush.
Btsmokincat Ultra Member ECF Veteran
I have an Innokin Coolfire TC 100 and I've noticed that my tanks are not screwing down all the way into the mod which isn't an issue I've encountered in the past. There is probably about 1 cm of space in between the connection where the tank used to sit flush.
ddirtyvapes Ultra Member ECF Veteran
For what it's worth, while this is normal and can happen with any device/topper combination that isn't fully adjustable, it is also a known issue with Innokin mods. They have short 510 connectors.
RCP1991 Senior Member ECF Veteran
Thanks guys. I should have paid more attention in 3rd grade math -- yes it's much more like 1, maybe 2 MM -- I appreciate the info, since it doesn't seem like a big deal I'll just deal
JCinFLA Vaping Master Verified Member ECF Veteran
I have at the most about a 1/2mm space underneath every tank I put on my Innokin Coolfire IV mods. It's only visable if I'm holding the mod up at eye level and can see light from behind it showing through underneath the tank. Doesn't make a difference in the coil firing correctly at all, so I just don't worry about it myself.
Tonee N Vaping Master Verified Member ECF Veteran
Some tanks flare out at the 510, i.e. Sense Blazer 200, on some of my boxes it sits higher on others it sits flush.
What happens if your vape coil is running low?
You also want to make sure you have a tank full of e-liquid. If it is running low then there will be nothing to pull into the coil to produce vapour.
Why does my Aspire Breeze gurgle?
Why is my Aspire Breeze vape gurgling? The gurgling of your device will be because there is e-liquid trapped where it shouldn’t be. This is usually in the coil or air tube (chimney) which leads from the coil to the mouthpiece. It will kind of sound like you are sucking a straw.
What is Aspire Vape Kit?
Aspire Vape Kits are known for building quality and great safety features. Which is why they’re one of our best sellers. However, like with everything, sometimes problems crop up.
Can you see if your atomizer is on your vape?
No atomiser found will be on the LED screen on your device if your vape isn’t reading the coil. You might need to tighten up the connection between the mod and the device and check that the coil is connected inside the tank.
Why does my vape pen leak?
Leaving your vape pen in the car during hot weather can also cause the cartridge to leak. That’s because the cartridge seals expand and creating a passage for vape juice to leak out. Drawing too frequently on your vape pen, known as chain vaping, can also weaken the cartridge seals, causing vape juice to leak out.
Why is my vape pen not producing vapor?
The most likely reason for this is that the firing pin doesn’t have proper contact with the battery, which can happen when the cartridge is screwed in too tight.
Why does my vape pen taste burnt?
If your vape pen produces an unpleasant burnt taste the reason could be either your vape pen’s temperature control is set too high, or the heating coil has residue on it . If your battery’s temperature is adjustable (a feature found in rechargeable vape pens), you can adjust it to a lower setting using its multi-click functions. Start by rapidly pressing button 5 times to turn it on, then press the button rapidly 3 times to alternate between low, medium and high temperatures. If it’s a problem with dirty heating coil, clean it with a cotton bud.
How many times do you have to press the button to turn on a vape pen?
You usually have to click the button five times to turn on the battery. When taking a hit, ensure you hold the button down, otherwise you won’t be able to draw.
Why does my battery light purple?
Battery flashes a purple light 3x when you connect a cartridge. This is to prevent a short circuit that occurs from the cartridge being screwed on too tightly. Try cleaning the electrodes on both the battery & cartridge. If this doesn’t work slowly unscrew the cartridge to see when then button turns solid.
How to remove air bubbles from a cartridge?
One way to remove air bubbles is heating the cartridge with a hair dryer set at a low temperature.
How to clean a clogged mouthpiece?
Dislodging whatever’s clogging the mouthpiece using a small using a safety pin, needle or toothpick. It also helps to regularly clean your cartridge.
ThatIrishGamerHD New Member
So I got my new coil and was vaping again but I must have over tightened the tank when screwing it on.Now it's time for a refill and I can't get this stupid tank apart.I have tried rubber gloves and I put it in the freezer for 10 minutes too but it won't budge.
TheRussianVaper Senior Member
You might have to force it, sounds like the ring got bunched up and stuck, so you might have to tare it and replace the ring. PS: I always lube the rings with a little bit of e- juice, makes it a lot easier later on and they last longer.
daviedog Vaping Master ECF Veteran
The rubber gloves as stated above do work,,but soak atty in PGA first. If there is any juice on your atty it will transfer to the gloves & you are SOL..
Andromendous Super Member ECF Veteran
You can fold up the rubber gloves and wrap it around the tank, then use the channel lock pliers. Ive done this a few times. As long as something thick is wrapped around it, it wont scratch it
Katcandoo Super Member Verified Member ECF Veteran
Happens to me all the time. I keep a pair of pliers and one of those flat rubber grippy jar opener things on hand. If you don't have a flat rubber grippy jar opener thing, a rubber band wound tightly on the base will work. Hold onto the base with whatever rubber thing you have, and use the pliers to (gently!) unscrew the top. Good luck!!!
