Full Answer
Are You having issues with your voopoo vape device?
More and more vapers got the voopoo vape devices, so may be some got the issues, today let’s check the issues and learn how to fix. the issue is the mod keeps asking ” New Coil (+)” or ” Old Coil (-)”, the vaping mod cannot detect the atomizer due to the short circuit of your tank or mod.
Why is my vape not getting power?
Improper vaping settings of power. 4.you vape too frequently. 1. Prime the coil with low wattage for the first several puffs. 2. Fill the e-juice over the minimum line of the tanks. 3. While vaping, please make sure the power of the mod is within the powe range that the coil can support.
Why is my voopoo Vinci vape leaking?
B) Cracked plastic: If your VOOPOO VINCI pod vape kit was dropped, or if it was in a pocket or purse that got bumped around a lot, it’s possible for the plastic to have broken and cause your VOOPOO VINCI to leak.
Why do my vape coils taste bad?
B) Coil is old: As a coil starts to wear out they will be more susceptible to a burning taste, as they become less efficient at bringing the e-liquid to the heating coils inside. Its best to replace your VOOPOO VINCI vape coils every 2-4 weeks. C)Incorrect Wattage: Different coils are designed to be used at different wattage.
Why is my Voopoo vape not working?
If the Voopoo Find S doesn't work when you press the fire button, the most likely cause is that the device is turned off. Press the five button five times quickly to turn it back on. If the device still isn't working, an error message should appear on the screen.
How do I reset my Voopoo mojo?
On the base of the mod is a “System Reset” button – I have seen a few mods starting to use these – this will reset the system if an error occurs. With removable battery mods you would just take the batteries out but obviously this has an internal battery. It is a colourful little fella to say the least!
How do you reset a Voopoo vape?
0:000:31How To Do A Factory Reset on Your IQC Vaporizer - YouTubeYouTubeStart of suggested clipEnd of suggested clipOnce the reset is complete the vaporizer will vibrate and button lights will. Turn. Off you.MoreOnce the reset is complete the vaporizer will vibrate and button lights will. Turn. Off you.
Why is my Voopoo not firing?
The most common reason your VOOPOO DRAG X is not firing when you push the button is because it is locked. Your device can be locked and unlocked by simply clicking the fire button five times quickly. The VOOPOO DRAG X is shipped in a locked position to prevent accidentally turning on during shipment.
How do I get Voopoo mojo back to Watts?
2:384:13VOOPOO MOJO Kit Setup & Tutorial - YouTubeYouTubeStart of suggested clipEnd of suggested clipAll you need to do is click this button three times. And it will change the mode.MoreAll you need to do is click this button three times. And it will change the mode.
How do you unlock a Voopoo vape?
0:000:47Voopoo Vmate 200W - How to Lock / Unlock the Fire Button - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd maybe it happened while it was in your pocket or something like that and you don't know how toMoreAnd maybe it happened while it was in your pocket or something like that and you don't know how to unlock it it is done like this hold down the UP button and the fire button at the same time.
Why does my vape keep powering off?
Weak battery. Your battery may simply just be running out of power. Try switching to a fully charged battery and see if it makes a difference. If you are using a variable wattage device, try turning up the power.
How do you reset a vape mod?
Reset the tank - You can 'reset' the tank by removing it from the mod, checking the screws are tight and pressing the fire button. Then re-attach your tank and select “n” when you are asked if it is a new coil.
How do you use a Voopoo vape?
To vape with the Voopoo Drag Max, hold the fire button while puffing on the device's mouthpiece. Move the tab under the pod to adjust the device's airflow. The Voopoo Drag Max has a graphical interface with two different themes. To switch between the themes, press the “+” and “-“ buttons simultaneously.
How do you fix a short circuit on a vape?
Here are a few things to try to resolve atomizer short:Make sure the batteries are charging them properly by putting them in a separate charger.If using an RDA/RTA, check and see if the coil is touching the cap or deck.See if there are any breaks in the coil.Ensure that the coil is fully screwed into the tank.More items...•
Can you hit Voopoo drag while charging?
Battery Life and Performance The Drag S, on the other hand, is more compact, has a decent battery capacity, and comes with USB Type-C charging, which means you can charge it up from depleted to full in about an hour. Plus you can also uses while it is charging.
How do you reset Voopoo drag 3?
The puff counter data can be reset by holding the power/fire button and the down/- buttons simultaneously. The Drag 3 runs on Voopoo's Gene Fan 2.0 chip and fires up to 177Watts. There are 2 main modes that can be changed by fast clicking the fire/power button 3 times.
What can you do with Voopoo firmware?
You can do the following customization operations via the voopoo Firmware: Prompt page, Temperature coefficient, temperature curve, wattage curve, increase/increase coil type and device upgrade#N#J. System resetting: When device system is broken down, you can recover it with pressing the system resetting
Can you press the fire button in lock mode?
Under the lock mode, it is invalid to press the up , down or the fire button separately. While it is valid to operate the combination key and to turn on/off the device.
Why does my vape taste burnt?
If you find your vape tasting burnt, its possible you are using an e-liquid with a very high VG level and that is too thick to saturate the wicks in the coils, leading to burning. Try using e-liquid that has a lower VG level (and higher PG level) to improve the flow of your e-liquid.
How often should I replace my vape coils?
Its best to replace your VOOPOO VINCI vape coils every 2-4 weeks.
Can you fill a pod with e-liquid?
A) Not enough e-liquid in pod: Check and make sure that the pod is filled with e-liquid. Its a good idea to re-fill your pod before it becomes completely empty, as the last small amounts of e-liquid will have a difficult time getting to the coil to saturate the wicks.
What is a mojo pod?
MOJO is the next-gen disposable pod vape. designed to help the one billion adult smokers worldwide break the cycle of cigarettes with the cleanest most convenient, and alternative to combustible tobacco available anywhere. Learn More.
How much nicotine is in a mojo pod?
(And a lot more flavor.) 5% (50mg) or 2% (20mg) nicotine by volume. Concentrated nicotine salts are used in MOJO next-gen disposable vape pods to give users the same satisfaction they used to get from cigarettes.
Z.smoke New Member
Love this little vape. But recently I ran out of juice and wasnt paying attention, got a burnt tast in my mouth, so i immediately changed coils and refilled my tank . Though my vape is fully charged, whenever I try to use it they read light comes on and stays on for a moment then disappears.
jfcooley I find your lack of faith disturbing... Verified Member ECF Veteran
I've done a little searching as well and come up with nothing. I'd suggest trying another coil, and if that fails contacting Voopoo. I haven't seen this issue on mine.
Z.smoke New Member
Thank you. I know its so unfortunate cause its such a great little mod that packs plenty of flavor and power. I broke down and just bought me a new one but instead I bought the Voopoo Drag 2. Thanks so much for your help .
