why is my aspire vape leaking

Every vaping tank may leak a little from time to time. Condensation can form in the chimney, for example, and flow out the mouthpiece when you place your device on its side. If your Aspire tank consistently leaks a large volume of e-liquid, though, something is wrong. The first thing that you should do is disassemble and reassemble your tank.

Full Answer

Why is my aspire vape pen leaking?

Apr 05, 2018 · Every vaping tank may leak a little from time to time. Condensation can form in the chimney, for example, and flow out the mouthpiece when you place your device on its side. If your Aspire tank consistently leaks a large volume of e-liquid, though, something is wrong.

Why is my vape gurgling and leaking?

Aug 15, 2020 · August 20, 2020. Long story short. Leaking tank might be caused by using the wrong e-liquid or coil, incorrect PG/VG ratio, faulty tank, faulty coil, or your vape tank isn’t assembled correctly. However, if you want to know more keep reading. For anyone who owns a vape, one of the most common issues you might run into is noticeable leaking of ...

Why is my aspire tank leaking?

It’s how you fill your tank. Vape tanks have a central tube extending from the coil up to the mouthpiece. If you get e-liquid in there, you’ll almost certainly run into problems with leaking or gurgling. The fix for this is simple…. Ensure that when you fill up, you avoid getting any e-liquid in the central tube.

How to prevent a vape from leaking?

Sep 06, 2017 · Jun 22, 2017. About a month ago I got an aspire zelos ( nautilus 2 tank ). I use it with salt nix (50/50) at about 11w using 1.8ohm coils. Aside from the disappointingly short lifespan of the coils, I've been very happy with it. But a couple days ago it started to leak from the air holes when inhaling.

How do I stop my vape from leaking?

Why is my Aspire vape spitting?

How do you Unflood a coil?

Why is my vape crackling?

What does it mean when your juice tank is cracked?

A thin crack in the glass or a piece of bent metal can mean the tank is no longer airtight, allowing the juice to leak out and into the air hole valve. If your glass is cracked it is usually an inexpensive and simple solution to buy a replacement.

How to keep a water tank from leaking?

Watch out when filling – Never overfill your tank. Always leave a small air pocket at the top when filling. This empty space will help prevent any liquid from leaking out. Also make sure not to fill it too quickly or you can risk flooding the tank. Check for cracks – Check your tank for cracks or other damage.

Why do multi strand coils pop?

Multi-strand coils often pop and spit due to their design. Twisted coils in particular have a bad reputation for this, but Clapton coils may have the same issue. Their design makes it easier for e-liquid to pool on the coil, and so sometimes it’s hard to entirely avoid popping on these coil types.

Can a vape leak?

A leaky vape is a common complaint of a lot of e-cigarette users. When you buy a premium vaping liquid like our Max VG blends, you don't want it leaking out all over. It's a waste of good juice. And while leaking vape juice isn't dangerous, it is annoying. A leaky vape can end up on your clothes, your hands, or all over your car or desk. If you struggle with leaks from your vape, it's not something you have to live with as an e-cig enthusiast. There are many things you can do to stop leaks and prevent them from coming back. The first step is identifying what's causing the leaks in the first place.

Why do vape pens leak?

Because of the thicker consistency, they are less likely to leak than liquids made from other bases. Some vape pens are just destined to leak when you are using a thin and runny vape juice. Switching to a high-quality VG liquid could help put an end to your leakage woes.

Is vaping dangerous?

And while leaking vape juice isn't dangerous, it is annoying. A leaky vape can end up on your clothes, your hands, or all over your car or desk. If you struggle with leaks from your vape, it's not something you have to live with as an e-cig enthusiast. There are many things you can do to stop leaks and prevent them from coming back.

How strong are e-cigarette tanks?

E-cigarette tanks are pretty strong, but they aren't invincible. They are mostly made of glass, which means there is always a chance they could get broken or cracked. Most vapers use their e-cigarettes all day long, meaning the device journeys from car to the office and back home again. They might get shoved in a pocket or tossed on a desk. So it's no wonder that damage happens to the tank occasionally. If you start to experience leaks, hold your vape up to a light and examine the tank closely. The light will make it easier to see hairline cracks or chips in the edges that could be causing the leaks. If you see any signs of damage, order a replacement tank right away (and consider investing in a carrying case for your vape!).

Why does my Aspire tank gurgle?

If your Aspire tank is gurgling and spitting, the most likely reason is that your device’s wattage setting is too low. As a result, the air pressure from your puffs is drawing more e-liquid toward the coil than the coil can vaporize. The excess e-liquid pools and spits out through the mouthpiece.

How to replace coil on Aspire atomizer?

In most Aspire tanks, the atomizer coil is connected to the tank’s bottom hardware. To replace the coil, twist the bottom hardware to remove it from the tank. Twist the atomizer coil out of the base and twist in a new coil. Prime the coil with a bit of e-liquid before using it for the first time.

How does an e-cigarette tank work?

In general, an e-cigarette tank works best for only one style of inhaling. The Aspire Nautilus 2, for example, is optimized for mouth-to-lung inhaling. It’s the ideal tank for someone who has just converted from smoking to vaping. The Aspire Athos, on the other hand, is designed for direct-to-lung inhaling. How can you tell the difference? A mouth-to-lung tank has a narrow mouthpiece and small air holes at the bottom. A direct-to-lung tank has a wide mouthpiece and large air holes.

Does Aspire tank cotton wick stay wet?

To have a great experience with your Aspire tank, the most important thing you can do is ensure that the cotton wick always stays wet. Dry cotton burns quickly, and an atomizer with a burned wick produces foul flavors. Keep your tank’s wick wet by following these three rules.

Is vaping easy?

Vaping isn’t always as easy as we might like it to be. Every tank has a variety of different coils and airflow settings. Every device has different vaping modes and wattage or temperature settings. You may sometimes encounter problems that you aren’t sure how to resolve. Never fear – we’re here to help.

1. Fill the tank properly

Most leaks are as a result of how you fill up the tank. Most atomizers have a central tube that goes all the way up to the mouthpiece. While re-filling, if you get any of the liquid into the central tube, then you will have some leaking problems accompanied by some gurgling.

2. Make sure everything is tightened up

You have to make sure all the components are properly screwed in. If there’s any gap, you will definitely have the liquid flowing out. Some of the areas you need to double check include;

3. Not too tight!

Screwing everything too tight will only assure you of a leak-free tank for a short time. In the long run, it does more damage than good for your equipment. When you over-tighten, you damage the O-rings found where the parts of the tank meet.

4. Keep the tank upright

It’s important to keep the vaporiser upright at all times even when you’re taking a break from vaping or not using the vaporiser. The vertical positioning of the vaporiser is even more important if the tank is less than half full.

5. Use the Correct Coils

Even for tanks that come with replaceable coils, it’s important to make sure you use the correct coil for the right juice. If you’re using high VG liquids which tend to be thicker, it’s better to use low resistance coils while PG liquids work better with higher resistance coils.

6. Check the O-rings

If you still have the leaking problem yet you have checked that your tank is filled up right, there is no cross-threading and all the parts are firmly screwed, the O-rings could be to blame. Other than over-tightening, O-rings can also fail because of degradation.

7. Having more seals

In some cases, you might need to have more seals to keep your e-juice in the right place. However, some vaporisers like the Aspire Triton run into problems if you try this and they start leaking.

Why is my vape tank leaking?

Leaking tank might be caused by using the wrong e-liquid or coil, incorrect PG/VG ratio, faulty tank, faulty coil, or your vape tank isn’t assembled correctly. However, if you want to know more keep reading. For anyone who owns a vape, one of the most common issues you might run into is noticeable leaking of the tank itself.

Can vapes leak?

Given the fact that vapes are designed as they are, leaking is actually quite a logical consequence of using the vape. However, that does not mean that it becomes any less annoying to find your hand covered in a vape juice!

Why is my e-cigarette tank leaking?

Leaking tank or e-cigarettes are often caused by either incorrect assembly or poor conditioning of the tank itself. It would be best if you start by taking it apart and looking at each component.

Can you put a vape back together?

Once you have gone through the checking process of the tank, you just need to put your va pe back together . This should give you a chance to try it out and see if the leakage is going to stop. If the leaking now stops, then the O-ring was the likely cause of the issue in the first place. However, be careful when putting components back together; excessive tightening will damage the O-rings again.

What is the coil in a vape?

The coil is an essential part of the vaping process, as it allows air to move around without making the e-liquid hard to set. If you are using a stock coil in your tank, you will naturally expect it to do its job as it supposes to.

Can PG juice leak?

Running high PG juices (50/50), which are thinner, can result in tanks leaking. Same way with higher resistance rated coils. They are designed for less viscous e-juices and running thicker juices can mean it will not wick properly and most likely will burn the coil.

4. Leave the Tank Standing Up

When you are not using your vape, or even in between vapes, the unit should be left in a vertical position.

5. Use the Correct Coils for the E-Liquid To Reduce Leaking

Most tanks come with replaceable coils with varying resistances. These are suited for doing different things.

7. Check for cracks

Hairline cracks in the glass can easily lead to e-liquid seeping out. When that happens, you need a replacement glass for your tank.

9. Add Extra Wicking Material (RBA only)

If you are having leaking issues when using an RBA (re-buildable Atomiser), then it is nearly always down to the way that it has been wicked.

10. Switch to Higher-VG Juices

This is a bit of a simplistic solution, but thinner, PG-based juices will generally leak more than VG-based ones.

11. Inhale Slowly and Softly, Not Firmly and Sharply

If you’re still having problems with leaky tanks, particularly if you’re relatively new to vaping, your inhalation style could be the cause.

13. Clean the chimney

If you do get condensation collecting in the drip tip, it’s well worth cleaning it out.

Gramdogg Ultra Member ECF Veteran

I'm definitely not overfilling. I'll try that upside down thing. Do they say why it helps?

stols001 Moved On ECF Veteran

What coils are you using? If 1.8 you may wish to try out the 0.7 sub-ohm coil. I am pleasantly surprised with this coil, the firstj one went bad only about 10--11 days in, though I still enjoy that "Pure MTL feeling,"and vape it well within its coil settings at 10 watts for me, no issues.

QcVaper Ultra Member ECF Veteran

I own a first gen nautilus (which i've heard are knowned to leak), i had the same thing at first went fine and dandy loved it,until it started to leak non stop.

djsvapour ECF Guru ECF Veteran

Thanks Miramooke, it is deffo on the top of my list of kits to possibly get. I found this one on sale. Aspire Zelos 50W TC Kit emailed the supplier to see how long the sale lasts as i will be going around my local b&m on monday just to see whats about.

Craybee Super Member ECF Veteran

here's a little trick i learned from watching this video. haven't had any leaks from my Zelos/Nautilus kit since. he begins addressing the issue at about 11:50 into it, and gives the solution to it at 13:20 into it. hope it helps.

Throughandthrough New Member

I had the zelos till today when the button completely fried out.... but had problems with it from the begining at 12 watts I was going through 2 coils a week or more at 1.8 and with the .7s they lasted maybe 5 days. Was given an 40w I leaf for temp use and it's working 10x better than the zelos ever did..