Full Answer
Why does my vape have flashing lights?
The flashing lights that are found on your vape are designed to quickly catch your attention when there's a problem and to make sure that you can address the problem quickly. Reading in your owners manual can be one of the easiest ways that you can discover what's going on and get your vape working again.
What does it mean when your vape is blinking red?
When there is not enough power coming from the battery, your vape will give a blinking light (a red light with some devices) to let you know it needs to be charged. To see if this is the case, charge your vape until the light stays on (or stays green), indicating a full battery.
Why is my aspire vape pen leaking?
Here’s a short science explainer on why your Aspire vape pen may be leaking: Why is my vape spitting? Your vape spitting liquid out of the chimney through the mouthpiece is usually a sign that you have flooded the coils. Take your device apart and remove any excess e-liquid from the centre post.
Why is my vape fire button stuck?
Fire Button Stuck Unfortunately, like most electronics, vape devices do have some weaker components, mainly, the firing button. Because of general wear and tear or because some liquid leaked underneath, your fire button may become stuck.
Why is my vape just flashing red?
Vape pen blinking red If the pen blinks red when vaping, it's a sign your battery is going low (below 30%), and it's time to recharge it. On the other hand, if the red or another color blinking happens when charging the pen, it simply means that the charging is happening.
Why is my Aspire vape blinking?
Most standard e-cig batteries flash, generally rapidly, in an effort to let you know they're running out of power. The Aspire K3, as an example, will flash blue when the fire button is pressed but nothing will happen when it detects the wrong coil.
Why is my Aspire vape not working?
You might need to tighten up the connection between the mod and the device and check that the coil is connected inside the tank. If the connection isn't quite right it will read no atomiser found. Make sure everything is nice and snug and try again.
Why is my Aspire vape flashing orange?
A flashing orange light around the PockeX fire button indicates a low battery and will signal that the device needs to be recharged.
How do you fix a blinking vape battery?
This is often caused by a loose battery. If the battery is not screwed in properly, it won't be able to fully charge and the indicator light will continue to blink. To fix this issue, unscrew the battery and re-screw it back in to make sure everything is firmly connected.
Why does my battery keep blinking even though it's charged?
The CHARGE light may flash for the following reasons: The environmental temperature is too cold to charge the battery pack. The battery pack has not been used for a long time. There is a poor connection between the battery and charger.
Why is my vape lighting up but not hitting?
A disposable vape uses an airflow sensor to detect when you puff. Sometimes, a disposable vape that doesn't hit isn't working because the airflow sensor isn't sensitive enough or because the sensor is blocked by condensation inside the device.
How do I know if my vape is broken?
5 Signs That Show It's Time To Change Your Vape CoilYour Vape Tastes Burnt. This is probably the most noticeable thing that tells you your coil needs replacing, and something most vapers will experience. ... Your E-Cigarette Is Gurgling. ... Your Vape Tastes 'Strange' ... Your Coil Is Used Up. ... E-Cigarette Leaks.
How do you reset a vape?
0:000:31How To Do A Factory Reset on Your IQC Vaporizer - YouTubeYouTubeStart of suggested clipEnd of suggested clipOnce the reset is complete the vaporizer will vibrate and button lights will. Turn. Off you.MoreOnce the reset is complete the vaporizer will vibrate and button lights will. Turn. Off you.
How do you fix a short circuit on a vape?
Here are a few things to try to resolve atomizer short:Make sure the batteries are charging them properly by putting them in a separate charger.If using an RDA/RTA, check and see if the coil is touching the cap or deck.See if there are any breaks in the coil.Ensure that the coil is fully screwed into the tank.More items...•
How do you unlock an Aspire vape?
2:395:48Aspire Zelos 50w Kit - Overview & User Guide - YouTubeYouTubeStart of suggested clipEnd of suggested clipPress again five times to unlock pressing the fire button times will turn on stealth mode and turnMorePress again five times to unlock pressing the fire button times will turn on stealth mode and turn the display off the unit will still operate. Press again three times to turn the display.
How do you work an Aspire vape?
0:221:46How to use your Aspire Pockex - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd ready for use to turn on the aspire pockets press the fire button five times in under threeMoreAnd ready for use to turn on the aspire pockets press the fire button five times in under three seconds. Button will flash to indicate it is now on repeat.
Why does my Aspire Breeze gurgle?
Why is my Aspire Breeze vape gurgling? The gurgling of your device will be because there is e-liquid trapped where it shouldn’t be. This is usually in the coil or air tube (chimney) which leads from the coil to the mouthpiece. It will kind of sound like you are sucking a straw.
What happens if your vape coil is running low?
You also want to make sure you have a tank full of e-liquid. If it is running low then there will be nothing to pull into the coil to produce vapour.
How to prevent e-liquid from flooding?
Take your device apart and remove any excess e-liquid from the centre post. If this is an ongoing issue, then you might want to consider taking smaller inhales or reducing your airflow as this can cause floods. Higher VG e-liquid can also help to prevent this as it is thicker than high PG vape juice.
When will Aspire vapes be released?
July 17, 2020. September 8, 2020. Aspire Vape Kits are known for building quality and great safety features. Which is why they’re one of our best sellers. However, like with everything, sometimes problems crop up.
What to do if your e-liquid is still gurgling?
Still gurgling? Take it apart and give it a good clean up. You also need to make sure you are using the correct PG/VG ratio e-liquid for your device. If you have a sub-ohm device you should be using high VG.
Can you see if your atomizer is on your vape?
No atomiser found will be on the LED screen on your device if your vape isn’t reading the coil. You might need to tighten up the connection between the mod and the device and check that the coil is connected inside the tank.
Why is my vape pen blinking?
If you have a blinking display light on your vape pen, it's also possible that you might have components which are incompatible with your device. Many vape devices will provide you with an alert when there is a replacement coil that is been installed with too low a resistance level.
Why do vapes flash?
The flashing lights that are found on your vape are designed to quickly catch your attention when there's a problem and to make sure that you can address the problem quickly. Reading in your owners manual can be one of the easiest ways that you can discover what's going on and get your vape working again.
What is a dazzvape mod?
This mod is built for concentrate vaporizers and it comes with a dual output mode. Dazzvape GT800 mods are easy to operate with three buttons on board and 800 mAh battery. The manufacturer also integrated a 0.69 inch OLED readout display. The variable wattage on board ranges from 5 to 20 W and there is an output that ranges between 600° down to 200°F. The atomizer is 1-3 ohms of resistance with 2.3 to 5.3 V outputs. On the display you can see readout for everything including the battery life, power and voltage output as well as the resistance of the atomizer. The firing button and adjustment buttons make it easy to fine tune the device. It also charges easily with a micro USB connection.
What to do if you see warning lights on a vaporizer?
If you see that you have several warning lights stop using your vaporizer as soon as possible and start checking for the issue before you keep using it. There's likely a checklist in your user's manual that is specific to your model.
What is the main body of a vape?
The device also comes with a number of protections and hardware safety features that can prevent failures or breakdowns in your vape. The main body is produced using zinc alloy with ABS and PC materials. The system also has a fairly strong weight for robust use but a discreet design.
What color is battery indicator meter?
The battery charge indicator meter comes with illuminated lights which also display error messages. The colors on the monitor will start at white with full charge, moved to blue at half charge and then turn to orange at 30% charge. The lights will flash when the device receives a warning.
Does the stainless steel vape have a texture?
As you adjust to higher voltage ratios, you can expect much higher volumes of paper. The stainless steel body sits flush with the bottom of the device and it also has a texture on it to allow for an easy grip. The battery is a beautiful extension to any vape with the chromed brass look and the improvements it can make.
Why does my Air 2 flash red?
The Air 2 uses red flashing lights to show you that your battery has been discharged and needs immediate attention. It will also blink rapidly if it detects a short circuit condition.
Why is my vape not charging?
Reason #1: A Loose Battery. Sometimes, the battery connection in your vape isn’t sufficient. This is often caused by a loose battery. If the battery is not screwed in properly, it won’t be able to fully charge and the indicator light will continue to blink.
Why does the Penguin SE special edition blink?
The Penguin SE Special Edition has an indicator light that will blink to communicate low battery life, like many other vape devices. Try charging your device to see if that resolves the issue.
What does the battery indicator light on a Pico 75W do?
The iStick Pico 75W Starter Kit from Eleaf has a battery indicator light that will blink when the battery reaches a power level of 10 percent or less. If your indicator light is blinking, your first option is to attempt to recharge the device and see if that resolves the issue.
What are the OLED indicators on a vape?
Thanks to the lean design of most vape mods, vaporizer manufacturers use OLED indicators to send a variety of signals to the user. Oftentimes these warnings come in the form of blinking lights of different colors.
Why does the battery indicator on my Rebel 3 flash?
The indicator also flashes if you hold the firing button down for too long, putting your device at risk of overheating.
Why is the Rocket 3 LED red?
For instance, the status of the mod’s battery is conveniently communicated as the LED light changes from green to red as the battery discharges. A low battery that requires immediate attention is pointed out by seven flashes of the LED. And, a short circuit causes the device to flash three times and shut down.
Why does my vape stop hitting?
The most common reason why a disposable vape stops hitting is because it’s simply out of e-juice. The average disposable vape contains enough e-liquid for up to 200 puffs, but the operative phrase there is “up to.”.
Why is my vape not working?
Sometimes, a disposable vape that doesn’t hit isn’t working because the airflow sensor isn’t sensitive enough or because the sensor is blocked by condensation inside the device. If you cover one of the device’s intake vents with your finger ...
Why do you cover the vent with your finger?
Covering the vent with your finger also has another effect: It reduces the cooling effect of the incoming air, thus making the vapor warmer and more intense.
Why is my vape giving me weak hits?
If your disposable vape is giving you weak hits, one potential reason is that the nicotine strength simply isn’t right for you . Consider buying a device with a higher-strength e-liquid next time. If the device worked in the past and has suddenly become less satisfying, though – or you simply want to get a more intense hit from ...
How to stop vaping from overheating?
Slow down. You can also help to prevent overheating by ensuring that you never leave your device in direct sunlight or in your car. If you’re already maintaining a slow vaping pace, your device might simply be producing a burned flavor because it’s out of e-liquid.
How to get weak hits on a vape?
If you have a pod-based disposable vape, you might get weak hits if air bubbles form around the pod’s wicks. Tap the device gently on a table to break the air bubbles. After giving the wicks a few seconds to get wet, you should get some nice hits again.
Can you refill a vape?
If you want to refill your vaping device, you should buy a device designed for that. Before you try refilling a disposable vape, you should also know that, when the device is out of vape juice, the battery is also nearly dead – so you’ll probably end up wasting e-liquid.
vgodbabyy Full Member
so I have an old aspire pockex that I’m trying to get to work. It doesn’t fire or anything, yet the fire button lights up blue when I hold it down. Is it just a connection issue? How do I fix this? The battery is fully charged and has been for quite some time now
OhmAlone Full Member
Is it possibly locked? Try hitting the fire button five times and then try
Baditude ECF Guru ECF Veteran
The only thing I can think of is the battery is old and no longer holds enough charge to fire a coil. Or the chip is malfunctioning. If you have a new coil, try that.