If your Firefly 2+ has clogged airflow or herb stuck in the mouthpiece, vapor production will be poor. The stainless steel heating plate of the Firefly 2+ will gunk up with resin over time. It is important to clean your Firefly 2+ periodically to ensure this build up does not occur.
Full Answer
Is the Firefly 2 hard to get the hang of?
The Firefly 2 is one badass vaporizer. But it can be tricky to get the hang of initially. Not for you though… because you have these EPIC 10 Firefly 2 tips and tricks The Firefly 2 is a convection vaporizer. This means you need to ensure you pack the bowl correctly. Normally, this means not over packing. But here, more is better.
How does the Firefly 2+ work?
The Firefly 2+ is the only vaporizer that heats dynamically across a wide range of temperatures with every inhalation. As you draw, the air temperature is increased up to your set maximum. The Firefly 2+ is the only vaporizer that heats dynamically across a wide range of temperatures with every inhalation.
Why does Firefly have more flavor than other vaporizers?
The many different flavors and active ingredients in plants vaporize at different temperatures. Because each draw from Firefly has a broad temperature range, it delivers more of these ingredients and flavors than any other vaporizers.
Can I use regular weed in the Firefly 2?
No, with the Firefly 2 you want to use coarsely ground weed – you want it chunky and clumpy. The reason for this is that it vaporizes better inside its convection-heater bowl.
What is the best temperature for Firefly 2?
I've found the new Firefly 2 Plus to have less draw resistance, quicker heat-up times, improved battery life, and much easier to get consistent results....Firefly 2+ Vaporizer Review.Name:Firefly 2+ VaporizerManufacturer:Firefly VaporPrice:$249Materials:Dry Herbs and ConcentratesTemp Range:200F – 500F6 more rows•May 9, 2020
How long does Firefly 2 battery last?
From each battery it will vary how long it'll last but you should be able to get on average about 5-6 sessions of about 5-10 draws each. So, figure about 25-50 full draws from a full charge depending on how long you pull for and what heat setting you use.
How do you unclog Firefly 2?
0:000:25Firefly 2+ How to Unclog Airflow - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd use a small tool to slide the lancet out of its protective case once you have the Lancet in yourMoreAnd use a small tool to slide the lancet out of its protective case once you have the Lancet in your hand. Use it to carefully poke out any clogs from the holes in your restrictor.
What does Firefly calibration do?
0:343:05FireflyPro Calibration Tutorial - YouTubeYouTubeStart of suggested clipEnd of suggested clipImportant when calibrating to keep the distance between the device and the target being measuredMoreImportant when calibrating to keep the distance between the device and the target being measured consistent all the time if the distance changes the measurement will be inaccurate.
Is the Firefly 2+ worth it?
The Firefly 2 is one of the few devices to actually perform well with concentrates. The temperature goes high enough and melting a glob into the mesh pad allows you to get a dozen nicely sized, very flavorful hits off. Definitely one of the best dry herb and concentrate 2-in-1 vaporizers around in this unit.
Is the Firefly vape worth it?
The Firefly is a cool portable vape with some unique qualities, and I'm pretty impressed with it. The original Firefly looks and feels sleek and very well-made, and it has a bit of weight to it. The vapor it produces is smooth and has an excellent taste, one of the best I've experienced.
What do you do when your disposable vape stops working?
#1: Tap it. Sometimes, a disposable's failure to hit is simply due to an air bubble in the cartridge that's preventing airflow. If this is the case, try tapping or flicking the side of the cartridge a few times, as this should break it up.
How do you unclog a vaporizer?
Step 1: Unplug the Vaporizer. Unplug the vaporizer and let it sit for 30 minutes. ... Step 2: Disassemble the Vaporizer. Remove the steam unit from the container and set it aside. ... Step 3: Soak the Steam Unit. ... Step 4: Remove the Steam Unit and Rinse. ... Step 5: Rinse Until the Unit Is Clean.
How do you clean an airflow vape?
The safest and easiest way to clean an AIO vape pen is by using a Q-tip. Soak a Q-tip in propylene glycol or distilled water and wipe the inside of the tank section thoroughly. For even better results, go over it once more with a dry Q-tip. This way you will be able to remove most of the gunk effectively.
How do you use Firefly 2+ with concentrate?
0:000:41Firefly 2+ How to Pack Concentrates - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt's best to stick to higher temperatures between 400 and 500 degrees Fahrenheit and when you'reMoreIt's best to stick to higher temperatures between 400 and 500 degrees Fahrenheit and when you're using concentrates. Take an extra-long first draw to allow your concentrate to soak into the pad.
How do you adjust the temperature on Firefly 2?
Tap the left button 3 times quickly (while still holding the right button). This puts the Firefly 2 into “temperature setting” mode. The LED blinks red 1 to 7 times, to indicate the current set temperature. Tap the left button again (while still holding the right button) to set the temperature.
How does the Firefly 2+ work?
The Firefly draw The Firefly 2+ is ready to hit in three seconds. Continually touch both buttons simultaneously, and wait for the third blink that stays solid green. Keep touching the sensors throughout your draw. Bring the mouthpiece to your lips and start to inhale through the Firefly.
How to get alcohol out of a firefly bowl?
When you wipe out the bowl, hold the Firefly with the bottom facing up, so alcohol drips out of the bowl, instead of into it. Use the tooth pick to scrape off any stubborn spots in the bowl.
How to put screen back in Firefly?
It only goes in one way, with the screen’s access hole facing up. Put the top lid back on, and remove the bottom battery cover. Reinstall battery, and slide the cover back on.
How to clean a firefly deck?
Clean the deck and bowl. Grab your brush, and take the top lid off the Firefly. Brush off any bits of herbs on the lid, the mirrored deck, and in the bowl. Open an alcohol pad and wipe off the bowl and mirrored deck. When you wipe out the bowl, hold the Firefly with the bottom facing up, so alcohol drips out of the bowl, instead of into it.
What do you need to clean a Firefly 2+?
What you’ll need. The Firefly Cleaning Kit has everything you need, including some alcohol pads, a brush, a toothpick, and a needle. You’ll use fresh alcohol pads every time you clean the Firefly 2+, and the toothpick and needle to clear the screens for deeper cleanings.
Who dropped the Mighty+ vaporizer?
Storz & Bickel just dropped the Mighty+ dry herb vaporizer - easily the most anticipated vaporizer release of all time!
How to vape concentrate with Firefly 2+?
To vape concentrate with the Firefly 2+, either download the Firefly app and use the “Concentrates” temperature setting, or set the temperature manually from the device. Follow the same steps as flower vaping. Pro tip: Be sure to take an extra long hit from your concentrate bowl on the first inhale.
How do you use the Firefly 2+?
Now that we've gone over the basics, here's a breakdown of how to use the device itself.
What is firefly 2+?
While this works, it can result in uneven vaporization. The Firefly 2+ uses convection heating, meaning the air is preheated before it passes through the material , preserving terpenes, ...
What is the process of cleaning a firefly?
Cleaning the firefly is a simple process that involves the heating chamber, the vapor path, the mouthpiece and the concentrate pad.
How long does it take for a firefly to turn off?
Continue to hold down the touch sensors while you inhale for ten seconds. After 30 seconds of holding the touch sensors, the Firefly will turn off automatically.
How to use a touch and glow vape?
Using the device's “touch and glow” heating feature, place your fingers on the touch sensors on either side of the vape — without pressing down or using force — to start heating. The LED light will blink two times to indicate it's heating up, then turn solid green.
How to put Firefly in temperature mode?
To put the Firefly into temperature setting mode, hold the right button and tap the left button quickly three times.
What happens when you draw firefly 2+?
As you draw, the air temperature is increased up to your set maximum. The Firefly 2+ is the only vaporizer that heats dynamically across a wide range of temperatures with every inhalation. As you draw, the air temperature is increased up to your set maximum.
What is firefly convection?
Firefly's dynamic convection technology delivers rich, flavorful vapor in seconds and celebrates your flowers and concentrates at their freshest.
How long does vapor stay in your body?
Vapor That Stays in Your Body. Since the inhalation is designed to last for 10+ seconds, the vapor droplets have time to deposit onto the inner surfaces of your lungs, where they can be absorbed into the bloodstream.
How long does it take for vapor to be ready?
Ready in 3 seconds. Whether you enjoy one draw or several, fresh vapor is always ready when you are.
What temperature should a portable vaporizer be?
Choose a temperature between 200°F and 500°F, the widest range available in any portable vaporizer.*
What is the new feature of the 2+?
We listened to our fans and critics alike. The main new feature of the 2+ is more airflow. 33% more to be precise. Breathe easy.
Can a firefly puff?
Only the Firefly can do this in a single puff.
What is Firefly 2?
The Firefly 2 is a convection vaporizer. This means you need to ensure you pack the bowl correctly. Normally, this means not over packing. But here, more is better.
How to pack a firefly 2?
1) Pack The Bowl Properly. The Firefly 2 is a convection vaporizer. This means you need to ensure you pack the bowl correctly. Normally, this means not over packing. But here, more is better. You want to pack the bowl as tightly as possible. Try to make sure it is flush with the top lip of the oven. Once you’ve done this, clear away any excess ...
How long does it take to draw Firefly 2?
The key to getting the most from the Firefly 2 is how you draw on the mouthpiece. You want to take long, deep draws that last around 6-10 seconds. It sounds weird, but you quickly get used to it.
Can you name a Firefly 2?
You can also name your Firefly 2 vaporizer inside the app, adjust settings for when you’re using concentrates, check battery levels, and even access Firefly’s retail store. It works great and is super-easy to use.
Is Firefly 2 a good vaporizer?
The Firefly 2 is one badass vaporizer. But it can be tricky to get the hang of initially. Not for you though… because you have these EPIC 10 Firefly 2 tips and tricks
Does Firefly 2 shut off?
The Firefly 2 features auto-shutoff; basically, this means that when you’re done vaping on it the device will automatically shut off, saving you precious points on the battery life front.
Can you use Firefly 2 while hiking?
OK, this is easily the most annoying thing about the Firefly 2 – especially if you use it while hiking or walking the dog. You have to stir up the materials mid-way through a bowl.
How to activate Firefly 2+?
There is no power button on Firefly 2+. To activate the heating sequence, place your fingers on the touch sensors located on either side of the device. To stop heating, remove fingers from touch sensors. While the heating sequence is activated by the sensors, no heat touches your flower or concentrates until you start to draw.
What is a firefly?
The Firefly is a true portable convection vaporizer. Convection heating produces the highest-quality vapor by pre-heating the air before it passes through the material, which is the optimal method for extracting the most flavors and active ingredients.
Why is the draw on Firefly so long?
Because each draw from Firefly has a broad temperature range, it delivers more of these ingredients and flavors than any other vaporizers. As you inhale, the temperature climbs from room temperature to over 400°F, releasing each ingredient as the temperature rises. This is why each draw on a Firefly is slightly longer.
How long is the warranty on Firefly?
provides a limited warranty on the Firefly TM device against defects in material and/or workmanship under normal use for a period of (2) years from the date of purchase. This limited warranty is transferrable.
What is the challenge of vaporizing plants?
The challenge in vaporizing complex plants is the dispersion of activation temperatures.
How does a firefly glow?
The Firefly's glow is produced by the heating element glowing through the borosilicate glass heating chamber. Much more than an LED or digital display, it creates a sense of connection to the vaporizing experience since you see the real power and heat that creates your vapor.
How to contact Firefly?
Contact Firefly direct at [email protected]. Our customer service agent will try to diagnose your problem and assist you in resolving it.
