Why is my vape pen battery not working?
Other vape pens use batteries with push-button atomizer activation. To turn these pens on, you’ll need to push the battery button five times quickly and hold the button down when you pull. If you’re using your vape pen’s battery correctly but it’s not working, inspect the battery’s contact point for damage or residue, like excess oil.
What happens if you leave a vape battery alone?
The battery is done. In some cases, you can get an extra puff or two out of a dead disposable vape if you leave the device alone for several hours. A disposable e-cigarette is usually calibrated so that the battery lasts a bit longer than the e-liquid supply.
Why do vape batteries drain so fast?
Storing batteries in a cold environment causes them to drain faster. Old or expired batteries eventually lose their charges, but this takes a significant amount of time. Lithium-Ion vape batteries, for instance, can take months to lose their charges.
Why won’t my vape get a hit?
As you vape, absorption causes the e-liquid on the outside of the fabric to move in toward the coil. If you’re chain vaping, though, you’re not giving the e-liquid a chance to absorb. Try a slower vaping pace. The cotton near the atomizer coil needs to be wet for your device to produce a satisfying hit. Disposable Vape Burned Flavor
How do I fix my vape battery not working?
Inspect the battery contact; it may be clogged or coated. If this occurs, wipe the contact portion with a Q-tip soaked in rubbing alcohol, let the terminal dry, reconnect your cartridge to the battery and try it again. Do NOT overtighten your cartridge. Make sure your battery is turned on and fully charged.
Why is my Jupiter battery blinking when charging?
What do the flashing lights indicate on the power supply when charging? The light tip on the Standard and Compact and the light indicator for Palm and Silo indicate the charge status of the device. When the battery is low, the light tip will flash 10 times indicating the need to charge the device.
How do I turn on my Jupiter vape pen?
Activating Vaporizer Inhale on Cartridge mouthpiece to activate the Power Supply. For Standard and Compact, the light tip will illuminate to indicate activation. For Palm and Silo, the LED on the device will illuminate to indicate activation.
Why isnt my Jupiter CCell working?
A lighter or hairdryer will do the trick. If you're going to use a lighter, you'll need to hold it up to the clogged part of the CCELL. But if you opt for a hairdryer, blast the vape cartridge from a few feet away. This away, the heat levels will increase gently and evenly inside the cartridge and unclog it.
Why does my pen battery keep blinking even though it's charged?
Low voltage: If the battery is charged but the pen is still blinking, it could be due to a low voltage. Low voltage often comes about due to poor battery connections, either due to dirt or improper lineup. To restore your pen to proper working condition, make the necessary adjustments.
How do I charge my Jupiter Ccell?
Insert the included Micro USB to the bottom of the Palm Power Supply, then connect the USB to a power adapter or active USB port (not included). For the best performance, charge the Power Supply often after use. While the Power Supply is charging, the small LED at the top of the device will light up and remain lit.
How does a vape battery work?
Vape batteries are the power source that heats up the THC oil cart and creates a vapor. The vapor can then be inhaled through the mouthpiece of the cart. Disposable or single-use vape pens are also available. These contain the vape battery and THC oil cart in an all-in-one device.
What happens if your vape battery is fried?
If the batteries are fried from overcharging, then you will have to get them replaced. Some shops do this for free, whereas others may charge you for the privilege. A lot of vape shops will do this for free, so if you have problems with your battery then you should take it to a local vape shop. 8.
Why is my vape pen not working?
If your disposable vape pen is not working because of a blockage and it’s made of plastic, then get a hair clip or unfolded paper clip or something similar and try to pick all of the blockages out. Make sure to be gentle as you prod. This should help with the airflow of your disposable vape pen.
How to fix a vape pen battery?
Firstly, you should allow your vape pen to fully charge every time you plug it in and deplete fully with every use.
Why is my brass knuckle vape not drawing?
The most common problem with Brass Knuckles vape batteries is that the mouthpiece becomes blocked, so definitely look for this first. If you’ve cleaned the mouthpiece (using isopropyl alcohol on a cotton swab is a sure way to clean thoroughly) and there’s still no draw, then you have another problem.
Why won't my vape pen hit?
If you’re working with a pre-filled cartridge then there could be something blocking the airflow of the vape. This can happen when you have used the same mouthpiece for a while, as the oil inside pre-filled cartridges (or disposable oil cartridges) often leave bi-products behind that can build up over time. This can lead to the airflow being completely blocked. If you look at your mouthpiece and see some fluff and some orange chemicals there, then you should definitely give this a deep clean.
What does it mean when a vape charger stays green?
If the vape charger stays green, it probably means that it’s fully charged and is ready for use. If your pen remains inactive, you may need to purchase a new battery. Find out what type of battery will fit your pen before purchasing, but we find that most 510 threaded batteries like this one will do the trick! 3.
How to clean a pen with orange chemicals?
In order to clean your pen's mouthpiece, you will need to detach the mouthpiece from the vaporiser and, if it’s metal, place it in boiling water for a while.
Cannabis oil has high viscosity and the concentrate may become stiff. When cannabis oil is cold or settled to one side of the cartridge, it may fail to flow correctly. To fix this, apply heat to the cart. Heating up the cart lowers the viscosity of the cannabis oil, which allows it to flow when you pull
A common solution for freeing up your settled cannabis oil involves using a hairdryer to heat the cart. Separate the cart from the battery and set the cart upright. On its low setting, hold a hairdryer about six inches away from the cart. Apply heat for about 30 seconds. When you see bubbles forming, let the cart sit for a few seconds.
Oil amounts appear low in cartridges
Sometimes when you purchase a vape cartridge, the oil level looks much lower than you thought it would be. If your oil level looks low, it could mean your oil has settled on one side. To resolve this problem, apply heat to the sides of the cart with a hair dryer method mentioned above and check to see if the oil level appears higher than it was.
Where are Jupiter cartridges made?
Jupiter Research devices and cartridges utilize CCELL® technology, a leading manufacturer of vaporizer devices and cartridges based in Shenzhen, China. As a designer, developer, and distributor of hardware and technology, Jupiter products are designed in the U.S. (Phoenix, AZ) and manufactured in the high-tech Chinese hub of Shenzhen.
What brands does Jupiter Research use?
Additionally, Jupiter Research proprietary vaporizer devices have been licensed to brands in the U.S. and abroad, such as Kanabo VapePod and Airovapor. To learn more about our partnership with Kanabo, click here.
How to prevent cartridge leakage?
To prevent leakage, store the cartridge with the mouthpiece pointing downward.
How to prevent condensation on a power supply?
For the best performance, prevent condensation by keeping the contact pins inside the device and on the bottom of the pod clean and dry. Remove the Cartridge from the Power Supply. Use a cotton swab dampened with isopropyl alcohol to clean the contact points. Allow contact pins to dry thoroughly before use .
Is vaporizer legal in Canada?
Yes. We are excited about the future of international vaporizer sales, as legalization continues around the globe, including Canada launching adult-use sales in October 2018 and concentrates in 2019. Jupiter Research is working with some of the largest Canadian LPs to design their vaporizer products. International sales represent ...
Does Jupiter Research manufacture for brands?
Does Jupiter Research private label manufacture for brands? Yes. Jupiter distributes CCELL® technology product lines and our customers have the option to customize and private label with their designs. We pride ourselves on working with a wide array of brands; in fact, most of our orders are custom designed products.
Can Jupiter Research cartridges be modified?
Can your cartridges be filled with tobacco, eJuice, or eLiquid? No. Jupiter Research cartridges and power supplies are not to be used for tobacco-derived products.
Why won't my vape pen turn on?
Won’t Turn On. If your vape pen doesn’t turn on, there could be several factors at play. A poor charger connection, a faulty charger, or a dead battery can all cause your pen to shut down semi-permanently.
Why is my vape pen not working?
Some of the most common causes behind vape issues are dead batteries, leaky o-rings, and burned coils. Hopefully, this guide helped you diagnose the cause behind your vape pen problems. If you’re still feeling puzzled, it may be helpful to visit a vape store for assistance.
What to do when your vape pen makes a gurgling sound?
When your vape pen starts to emit odd noises, the first thing you should do is turn it off and stop using it . The second thing you should do is check the tank for signs of flooding. Gurgling sounds often mean that the tank is too full.
What to do if your vape doesn't turn on?
Still, if your vape doesn’t turn on even after being connected to a power source, there’s one more thing you can try. Check your battery.
What to do if your vape is leaking?
If your vape uses a latching mechanism , check to ensure that the latch is in excellent condition.
What happens if your e-liquid tank is tight?
Over-tightening your tank can cause premature wear and tear that damages the o-rings.
How long after refilling e-liquid can you drag?
If you’re not allowing your e-liquid to permeate the wick, you might be doing yourself a foul-tasting disservice. Try waiting two minutes after refilling before taking a drag. However, the heating coil in your device may be close to burning out, causing your hits to taste like the worst batch of popcorn ever made.
Why is my vape pen not producing vapor?
The most likely reason for this is that the firing pin doesn’t have proper contact with the battery, which can happen when the cartridge is screwed in too tight.
Why does my vape pen taste burnt?
If your vape pen produces an unpleasant burnt taste the reason could be either your vape pen’s temperature control is set too high, or the heating coil has residue on it . If your battery’s temperature is adjustable (a feature found in rechargeable vape pens), you can adjust it to a lower setting using its multi-click functions. Start by rapidly pressing button 5 times to turn it on, then press the button rapidly 3 times to alternate between low, medium and high temperatures. If it’s a problem with dirty heating coil, clean it with a cotton bud.
Why does my vape pen leak?
Leaving your vape pen in the car during hot weather can also cause the cartridge to leak. That’s because the cartridge seals expand and creating a passage for vape juice to leak out. Drawing too frequently on your vape pen, known as chain vaping, can also weaken the cartridge seals, causing vape juice to leak out.
How many times do you have to press the button to turn on a vape pen?
You usually have to click the button five times to turn on the battery. When taking a hit, ensure you hold the button down, otherwise you won’t be able to draw.
Why does my battery light purple?
Battery flashes a purple light 3x when you connect a cartridge. This is to prevent a short circuit that occurs from the cartridge being screwed on too tightly. Try cleaning the electrodes on both the battery & cartridge. If this doesn’t work slowly unscrew the cartridge to see when then button turns solid.
How to remove air bubbles from a cartridge?
One way to remove air bubbles is heating the cartridge with a hair dryer set at a low temperature.
What causes a short circuit in a battery?
Short circuit. Clean the electrodes on your battery, there is likely debris that has caused a temporary short. Cartridge is clogged, nothing happens when you pull. Depending on how it was put away or when it was used last there may be some some oil residue in the air hole.
What is Jupiter vape pen?
Jupiter Vapes. The Jupiter vape pen provides you with hours of entertainment. Choose to enjoy it in your living room or on the go. There are many different designs to choose from, from slim and sleek to flat and boxy, as well as a variety of colors.
What color is the Jupiter battery?
Every Jupiter battery is available in a single color such as black, silver, white, blue or pink. The Jupiter logo is imprinted on each device. The impressive performance can make this vape your new favorite accessory.
Do you have to clean Jupiter vapes?
There is no need to constantly clean the device. A popular version of the Jupiter vape has inhale activation, so you can let the good times begin without a click of a button. The L9 also has magnetic cartridge connection for an extra-tight hold to the battery.
