The cause of vape spitback is because e-juice is pooled up on the coil and is cooking, rather than being vaporised as it should be. This flooding can be caused by a number of factors such as over saturating your coil and using the wrong vaping technique for your device (ie trying to do direct to lung using mouth to lung kit).
Full Answer
What does it mean when your vape spits?
Spitback is instantly noticeable as the liquid in the mouth. The flavor and nicotine will leave a strong sensation. If vaping at high wattages, the liquid may also be hot and uncomfortable. A vape spitting is most often a sign that the vape juice has overly saturated and flooded the coils.
Can flooded vape coils cause spitting?
Flooded vape coils are a nuisance! Not only can you get a vape spitting but you will also get a gurgling sound, less vapor, and sometimes less airflow. After a vape has been sitting all night, it is quite common for the first few hits of the day to have some gurgling and spitback.
How do I Stop my vape from spitting up?
If you’re having spitback issues, changing to a high-VG e-juice can solve the problem by slowing down your wicking. Pulse the fire button – If you’ve primed or dripped too much—just pulse the fire button a couple of times before you start to inhale. The popping sounds should fade, leaving the ordinary, white noise-like hum of vaporization.
What happens if wattage is too low on a vape?
When the wattage setting is too low, the heating element takes a while to get the vape coil to reach vapor-generating heat. When you inhale with lower power mode, the atomizer receives the vape juice before the coil can properly heat up.
Why is my vape spitting so much?
Sometimes referred to as spitback, this can happen when there's too much e liquid in the centre of your coil. This can't be vaporised properly and it bubbles or pops like water being brought to the boil. As you inhale, some of these 'pops' may shoot up the centre post of your tank.
How do I get my vape to stop spitting?
How Do I Stop My Vape From Spitting/crackling?Prime your vape coils. For one thing; prime patiently! ... Flick your vape downwards onto paper towel. ... Clean your tank with cotton buds.
What wattage setting should I vape at?
Often, regardless of the type of tank, the best performance of the majority of vapes occurs between 80 and 100 watts. Higher wattages will render your coil “useless” – burn out and reduce the battery life.
Is it better to vape at lower wattage?
However, if you are looking for a smoother vaping experience, it is worth reducing the wattage on your vape device. Bear in mind that battery life is also decreased by continually vaping at the highest wattage setting. If you are a frequent vaper, make sure you are charging your battery well or using back-ups.
How do you Unflood a coil?
How do you fix a flooded coil?Flick the device to remove excess e-liquid from it.Blow through the tank in order to clear e-liquid from it. ... Remove the coil and leave it to dry on some tissue paper. ... Fire up the device without inhaling (but don't overdo it).More items...•
What wattage gives the best flavor?
The sweet spot for getting a balance of vapour and flavour is around 0.3ohms. Depending on your coil choice you'll want to up the wattage from anywhere between 50 and 100 watts. Clapton and Alien coils usually take a bit more power to ramp up so you'll want to boost the wattage if you're using either of these options.
How many puffs Should a coil last?
On average, a decently constructed coil for a sub-ohm tank should last you 4 days to 1 week. If you vape less because you cannot vape during work hours, or you do not vape throughout the day, then your coils are likely to last twice as long.
Does higher wattage use more juice?
If your vape coil is being run at a higher wattage and producing more vapour, it needs to use more e-liquid to create that vapour. This is why vapers using sub-ohm vape coils at 40 or 50W or even higher can get through a 10ml bottle of e liquid or more in a day.
What happens if you vape at too low of a wattage?
Since the smoke is thicker at a higher temperature, this also gives you a harder hit to the throat, if you prefer to have that experience. The only downfall of this is that it shortens the battery life of your vape since you use a higher wattage. Setting your vape to a lower wattage is okay.
What is considered a low wattage vape?
What most people overlook, though, is the fact that even 10 watts is sufficient to guarantee a satisfying vape, and some users are right at home with this wattage. By and large, though, we could say vaping starts to get more exciting between the range of 40 and 50 watts.
Does higher wattage mean more flavor?
Wattage for sure can impact flavor, as higher wattages can produce a stronger flavor. That can be a good or bad thing depending on your tastes and the flavor of the e-liquid itself.
Does higher wattage burn coils faster?
When you vape at a high wattage, the liquid absorbed by the coil's wick could be burning off faster than the wick material can absorb more ejuice.
What wattage should I vape at 0.6 ohm?
12-25 wattsIn contrast, the 0.6ohm coils have a recommended wattage of 12-25 watts. They are therefore classed as restricted direct to lung (RDL) coils, offering less clouds but conserving your battery and e juice.
What wattage should I start with a new coil?
Take a few short vapes to slowly start to break in the coil. Increase the power by 5 watts. Take three normal vapes and increase power by 5 watts. Repeat the gradual increase in wattage until the desired power setting is reached.
How to stop vaping from spitting?
Stop your vape spitting by cleaning regularly. 1. Prime your vape coils. For one thing; prime patiently! The right way to prime is to simply ‘paint’ the exposed cotton with a miniscule touch of vape juice, and then be sure to still wait 5 minutes or so before first firing up your unit. 2.
Where does vape juice come into contact with the heating element?
Unfortunately, many prime their coils a little too intensely, dropping large quantities of vape juice into the centre of the coil, where it comes into direct contact with the heating element and behaves the way most liquids do when sudden, direct heat is applied to them.
What is a spit guard?
There are several drip tips and mouthpieces available that come fitted with a spit guard, effectively a honeycomb or mesh design with holes that are smaller than the agitated vape juice droplets, ensuring the mouthpiece will always be able to catch them before they reach your lips.
Why does my vape keep crackling?
About 90% of the time the reason your vape is spitting or crackling is because the interior of the coil has become flooded with vape juice. Take a moment to imagine what happens if you sprinkle a few drops of water onto a hot pan; the liquid bubbles about, unable to withstand the agitation of direct heat and flies off in any direction to get away.
What is the firing button on a Caliburn G?
The Caliburn G’s firing button is entirely optional, allowing you to activate the unit simply by puffing it. This means the device will only be firing for the moments of your inhalation and never powerfully enough to cause a volatile reaction inside your coil’s housing.
Can you use anti spit mouthpieces on a vape?
Anti-spit mouthpieces are available for those who can’t use a spitting vape. While there aren’t a great many vapes which advertise ‘spit proof’ as a selling point, there are a handful of products you can utilise to cut down on spitback and crackling.
Can you vape with spitback?
If spitback is enough of an irritation that you’re questioning whether to continue vaping, we recommend that you instead opt for a slightly less powerful vape. While no vapes are entirely free of this, you will find that smaller, MTL vape systems are less likely to violently cast hot vape juice in your direction.
Why does my vape spit?
A vape spitting is usually caused by atomizer flooding. Spitting often happens in conjunction with the gurgling sounds that indicate flooding. Temporarily increase the wattage setting to vaporize any excess juice to handle spitback. Make sure your coils heat evenly.
What is spitting vape?
What is spitback or a vape spitting? A spitting vape is when excess e-liquid in the coil bursts from the coil, up through the mouthpiece, and into the vaper’s mouth. Spitback is instantly noticeable as the liquid in the mouth. The flavor and nicotine will leave a strong sensation. If vaping at high wattages, the liquid may also be hot ...
Why is my vape juice leaking?
A defective or worn out O-ring may allow excess vape juice to seep into the atomizer. Check and replace the O-rings if you are getting persistent flooding even with new coils. Gravity can cause flooding and spitback. If a vape is left on it’s side or upside down, vape juice can leak into the chimney and mouthpiece.
Why does my atomizer spit?
There are a number of reasons that an atomizer coil might flood. A failing or defective coil can also be the cause of flooding and spitback. If the coil is not fully heating or insufficiently heating then not enough vape juice will be vaporized. That will lead to flooding and vape spitting.
Why do vape coils gurgle?
This is because overnight the liquid can seep into the coil. Usually, after a couple of vapes the flooding clears up and you don’t have to worry about it for the rest of the day.
Why is my atomizer not getting enough power?
Another problem could be that the atomizer is not getting sufficient power from the battery to fully heat because the contacts are compromised.
What happens when you fire an atomizer?
When you fire the atomizer, the vapor coming up through the flooded juice makes the liquid spit and jump up the chimney and through the mouthpiece. Spitback liquid can be hot and uncomfortable but usually it is just annoying to taste the raw liquid in your mouth. I know, I said that twice now. But it is true!
Why does my vape pop?
The action of heating liquid and turning it into vapor can cause the same reaction in your vape device. If the vape popping sound is excessive, it can ruin your enjoyment of vaping. It could also be a signal that’s something is wrong with your device or your liquid. Here are the primary reasons your vape pops excessively.
What does it mean when your wattage is low?
Your wattage or voltage might be too low. Low wattage means your device can’t heat the e-liquid into vapor quickly enough. The e-liquid overflows the tank, resulting in spitback and popping noises.
How do you know if a coil is braided?
The Coil Is Twisted or Braided. You might like the flavor you get from a braided coil, but those braids can leave spaces in the coil. When you introduce e-liquid, it can seep through the braids or coils. You’ll know it’s happening by the hissing, popping sounds. If you braid the coil yourself, try tightening it.
How to get e-liquid into your mouth?
Take Short Inhales. Taking a log, deep inhale can force e-liquid into the chamber and into your mouth. If you repeatedly have this problem, you’re probably pulling too hard. Let the coil and the wick heat the liquid. Inhale gently. You’ll take in pure vapor and have a more enjoyable, flavorful vape.
How to clean e juice from chimney?
Here, the solution is simple. Remove your drip tip. Roll up some tissue paper, insert it into the tank and soak up the excess water. Regular cleaning will help you avoid this problem.
Is PG in a tank thicker?
This is especially likely to happen in a sub-ohm tank, which works at higher temperatures. E-liquids with high propylene glycol (PG) content are usually thinner. You probably enjoy high-PG liquids because the flavor is excellent, but look for a thicker liquid if you have frequent popping.
Why does my vape keep popping?
Unfortunately, there are a few different causes for your vape spitting and popping. This can range from the vape device being at too low a wattage, preventing the e-liquid from heating up correctly, to over-priming your coil. That’s when you saturate your wick (often organic cotton) with too much e-liquid.
Why does my vape make a gurgling sound?
Because you’re dealing with an electronic device that has a heating element and liquid mixed together, some sort of reaction is expected. When there is too much e-liquid, not all of it will vaporise to create the vapour needed to inhale. A little crackling typically happens ...
Why does my vape crackle?
A little crackling typically happens whenever you vape because all of these parts are working together . It’s when the gurgling noise increases and intensifies that you need to take immediate action. What ends up happening is you get a damaged coil that requires replacing.
Is vaping a good alternative to smoking cigarettes?
As we know, vaping e-liquid is a much wiser option as an alternative compared to smoking cigarettes. Organisations such as Public Health England (PHE), the NHS and Cancer Research UK tell us as much with yearly reports on the subject.
How to fix a leaky vape?
Ensuring your device is tightened up properly can be a quick fix for a leaking vape. Make sure the top of the tank, the base of the tank, the coil, etc, are all screwed up to the right amount; the details on each component should line up properly with one another. This will prevent the parts from being too loose, and too tight. If the parts are screwed together too tightly, this can damage the o rings like we mentioned earlier.
Why does my e-liquid make a popping sound?
Having a flooded coil will cause the e-liquid to spit back up through the chimney and into the mouthpiece. This can cause a popping or gurgling sound, reduce the airflow, and give you a pretty nasty surprise when you try to inhale!
Why does my e-liquid tank leak?
Having a build up of e-liquid residue inside your tank can cause problems with the air seal, which can cause it to leak. Try to clean your tank regularly by rinsing it out with cold water, and letting it air dry.
Why does my vape spit?
The cause of vape spitback is because e-juice is pooled up on the coil and is cooking, rather than being vaporised as it should be. This flooding can be caused by a number of factors such as over saturating your coil and using the wrong vaping technique for your device (ie trying to do direct to lung using mouth to lung kit).
Remove excess liquid
In your vape tank there will be a centre post. When excess e liquid runs down the centre it falls into the middle of the vape coil. To clean this up and take a piece of tissue and push it down the centre of the tank to clean out the excess ejuice.
Careful not to over-prime the coil
Priming your new coil is important to avoid dry hits. However, if you want to avoid vape spit, then you need to make sure you don’t over saturate the chamber. This can cause a flood of eliquid and spit back as a result.
Try a thicker e-liquid
If you are using a big cloud kit and a high PG eliquid then you will be more likely to flood the atomiser. This is because PG is much thinner than VG. VG is thicker and therefore slows down the wicking. Shop high VG eliquids >
Close the airflow a little
To prevent too much e juice reaching the coil you could reduce the airflow on your tank.
Adjust the power
When you vape with low wattage you may find that you are not vaping the e-liquid quickly enough for your wick. Up your watts by 5-10 if you have a variable wattage mod.
Fire her up
Before you take a drag on your vape, try pressing the fire button. You should hear those dreaded spitting and popping sounds fade into the distance. Once they have stopped, try giving it a vape.
Why does my vape tank leak?
Leaking happens when e-juice escapes from your tank, usually through the airflow system. Depending on the reason behind it, leaking can range from a few drops of e-liquid, to having your tank emptying all of its contents all over your vape mod. It’s a common problem with even the most popular sub ohm tanks.
What does it mean when a juice tank is not airtight?
Check for cracks – Check your tank for cracks or other damage. A thin crack in the glass or a piece of bent metal can mean the tank is no longer airtight, allowing the juice to leak out and into the air hole valve.
Why do multi strand coils pop?
Multi-strand coils often pop and spit due to their design. Twisted coils in particular have a bad reputation for this, but Clapton coils may have the same issue. Their design makes it easier for e-liquid to pool on the coil, and so sometimes it’s hard to entirely avoid popping on these coil types.
What happens if you inhale too much liquid?
If you inhale too forcefully, you risk bringing too much e-liquid into the coil, which may lead to leakage. Watch out when filling – Never overfill your tank. Always leave a small air pocket at the top when filling. This empty space will help prevent any liquid from leaking out.
How to remove e juice from a tank?
First make sure the threads are in sync and closed tightly, but not too tight. Find that sweet spot. If the threads are crossed, screw it back together carefully. Remove e-juice from chimney – All tanks have a central airflow tube that runs from the body of the tank up to the drip tip, known as the chimney.
How to prevent juice from leaking?
Sometimes if you’re in a hurry, you may cross-thread the top cap or forget to screw it together tight enough. This can cause juice to leak out of the openings.
Can you shut off airflow on a vape?
Check your airflow – Always make sure the airflow holes are fully closed when filling. When in use, make sure the airflow is open enough to allow you to vape without having to take strong inhales.
Good morning! GenS is the best vape ever! Batteries last a full day, huge tank, powerful hit, so happy with it
Good morning! GenS is the best vape ever! Batteries last a full day, huge tank, powerful hit, so happy with it.
i have a drag platinum 2 i haven't used it in a while but i don't think thats how it supposed to look is something stuck ?
Your one stop shop for getting any vaping questions answered. Please read the rules as we aren't your typical vaping subreddit!
