Every vaporizer pen should be in the locked position when we ship it to the customer. The lock position helps to prevent the battery from turning on while in transit. This is also an important feature when carrying your pen in a purse or bag.
Why does my vape pen have a lock button?
The lock position helps to prevent the battery from turning on while in transit. This is also an important feature when carrying your pen in a purse or bag. After receiving your vaporizer, test to see if the pen is locked or unlocked. You can do this by pressing the button once.
Is your vape pen leaking juice?
Any gaps in the vape pen will allow vape juice to leak out. You are tightening your tank too much. But overtightening your vaping device can be just as bad. If you are using all your strength to tighten your vape, you are probably doing more harm than good when it comes to preventing leaks.
Why is my vape pen cartridge clogged?
If the battery doesn't have enough power, the performance may lack severely, and that may cause you to think that the vape pen cartridge is clogged. There are a few steps that you can take to try to fix the clogging issue, if in fact the vape pen cartridge is clogged.
Why is my vape pen blinking?
The most common reason for a flashing light on your vape pen is to indicate that your battery is running low. When there is not enough power coming from the battery, your vape will give a blinking light (a red light with some devices) to let you know it needs to be charged. To see if this is the case, charge your vape until ...
How do you unlock your vape pen?
Make Sure The Battery Is Unlocked To unlock or lock an OK Ego Vape Pen battery, simply press the button 5 times in quick succession. The blue LED on the battery's button will flash 3 times to indicate that it has been locked or unlocked.
How do you fix a stuck vape pen?
Here, all you need is to spray some aerosol between the vape and tank to remove the dried vape flavor that most likely causes the jamming. Leave it for fifteen minutes, use a clean piece of cloth to dry it off, and then use any of the above methods. Chances are it will work this time.
How do you unlock a battery for a cart?
0:411:57How to unlock the Vaporbrothers Dabbler by Vape-Pen - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo what you want to do is press the button at least six times a row.MoreSo what you want to do is press the button at least six times a row.
Why is it hard to pull from my vape?
One of the most common reasons for a cartridge to stop pulling is due to the oil being too thick. This may cause the holes in the cartridge to become clogged and make it hard to pull. In the event that this happens, first, check if your cartridge is glass or plastic.
Why is my vape pen not working?
Inspect the battery contact; it may be clogged or coated. If this occurs, wipe the contact portion with a Q-tip soaked in rubbing alcohol, let the terminal dry, reconnect your cartridge to the battery and try it again. Do NOT overtighten your cartridge. Make sure your battery is turned on and fully charged.
How do you turn the power lock off on a vape?
3:548:23SMOK NORD 4 - Now with More Power! - YouTubeYouTubeStart of suggested clipEnd of suggested clipOne two three and it's going to lock the entire device lock the wattage lock it so you can't vape itMoreOne two three and it's going to lock the entire device lock the wattage lock it so you can't vape it. And then if you want to turn it on or off will be five clicks one two three four.
How do you unlock a vape mod?
0:171:02How to Lock and Unlock a Uwell Crown 4 / IV Mod! - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo let's unlock it hold down the power button and the UP. Button at the same time.MoreSo let's unlock it hold down the power button and the UP. Button at the same time.
How do I unlock my drag vape?
- Lock / Unlock = Press the Fire button and '+' (up) button simultaneously. - Mode Switching = Quickly press the fire button 3 times.
How to unlock a vape pen?
To unlock the vape pen rapidly (we mean fast!) press the button 6 or more times until the button flashes. Disregard any set number of presses you may read in the instructions. If you do not have the timing or the rhythm down or skip a beat, this will alter the number of times you need to press the button. I just press the button until it flashes.
How to lock a pen?
To lock the pen, simply follow the same instructions as unlocking the pen. Once the button flashes, the pen should be in locked position and the button will not light when pressed down. So please don't panic when you first get your pen and the button doesn't light when pressed.
Why is the pen lock position important?
The lock position helps to prevent the battery from turning on while in transit. This is also an important feature when carrying your pen in a purse or bag. After receiving your vaporizer, test to see if the pen is locked or unlocked. You can do this by pressing the button once.
First, recognize if there is an airflow problem in your vape pen
Spotting the problem is not that hard. If you have to inhale too hard to get the vapor into your lungs, or there is just nothing coming out of the pen, you may need to fix a couple of things.
Why does my cartridge keep getting clogged?
The oily residue that accumulates in your vape pen after every use blocks the small airflow holes on your cartridges. So, make sure to clean the parts of your vape pen regularly.
Why is there no vapor coming out of my vape?
If the airflow holes aren’t blocked, the mouthpiece could be the source of the problem. If that is the case, get a safety pin or something similar and put it gently right through the mouthpiece to check if there is anything that needs to be removed or cleaned.
How to fix the airflow of a vape pen
Do not overfill the oil cart. If you feel hot bubbles in your mouth, you better reduce the amount of oil in the cart. Also, don’t leave the device on for too long if you are not going to use it during that time.
Beware of the oil viscosity
The type of oil you are using in your pen can determine how to use the settings of your vape pen. Some oils have higher or lower viscosity. If the oil is thicker, give it more time to get warm enough to take a hit.
Can you vape with no airflow?
This question is pretty self-explanatory. The airflow is what carries the vape inside of your mouth then your lungs. You would only kid yourself if there is no airflow in your pen and you assume you are vaping.
Why does my vape pen leak?
Leaving your vape pen in the car during hot weather can also cause the cartridge to leak. That’s because the cartridge seals expand and creating a passage for vape juice to leak out. Drawing too frequently on your vape pen, known as chain vaping, can also weaken the cartridge seals, causing vape juice to leak out.
Why is my vape pen not producing vapor?
The most likely reason for this is that the firing pin doesn’t have proper contact with the battery, which can happen when the cartridge is screwed in too tight.
Why does my vape pen taste burnt?
If your vape pen produces an unpleasant burnt taste the reason could be either your vape pen’s temperature control is set too high, or the heating coil has residue on it . If your battery’s temperature is adjustable (a feature found in rechargeable vape pens), you can adjust it to a lower setting using its multi-click functions. Start by rapidly pressing button 5 times to turn it on, then press the button rapidly 3 times to alternate between low, medium and high temperatures. If it’s a problem with dirty heating coil, clean it with a cotton bud.
How many times do you have to press the button to turn on a vape pen?
You usually have to click the button five times to turn on the battery. When taking a hit, ensure you hold the button down, otherwise you won’t be able to draw.
Why does my battery light purple?
Battery flashes a purple light 3x when you connect a cartridge. This is to prevent a short circuit that occurs from the cartridge being screwed on too tightly. Try cleaning the electrodes on both the battery & cartridge. If this doesn’t work slowly unscrew the cartridge to see when then button turns solid.
How to remove air bubbles from a cartridge?
One way to remove air bubbles is heating the cartridge with a hair dryer set at a low temperature.
How to clean a clogged mouthpiece?
Dislodging whatever’s clogging the mouthpiece using a small using a safety pin, needle or toothpick. It also helps to regularly clean your cartridge.
What does it mean when a vape pen is unlocked?
If the vape pen is unlocked, it will light up. If the vape pen is locked (as it should be) there will be no light. This could also mean that your vape pen needs charging. Either way, you will know it is not switched on and this is a simple rule to follow every time you get your vape pen out.
What happens if your vape pen doesn't unlock?
If Your Vape Pen Does Not Unlock. If you vape pen does not unlock when you follow the above procedure, then perhaps your battery is dead. If you put your battery on charge for around 10 minutes and try again, this should be enough to unlock your vape pen if that is the problem. Your vape pen battery should last for around 2 years, ...
How to unlock a vape pen?
In order to unlock your vape pen, you just need to press the button a few times in quick succession until you see the button’s light flashing. The instructions may tell you to press the button a set number of times, but you don’t press the button quickly enough during those times then that may not work. The best way to do it is to press the button very quickly several times (usually 5-6 is enough) until you see the light flashing. Your vape pen will then be unlocked and ready to use. You can check it is unlocked by pressing the button one time after this procedure and it should remain a steady light.
Where is the liquid in a vape?
There is vape liquid in the chimney. The chimney of your e-cigarette is the hollow tube in the middle of your tank. If liquid gets into this area, it can cause some minor (but annoying) problems like spitting, popping, and leaking. The easiest way to prevent your eLiquid from getting into the chimney is to make sure you don't overfill the tank.
What happens if you overfill a vape tank?
If you overfill, the liquid will seep into other areas of the tank and seep out. You shouldn't fill your tank all the way up, either. Your vape needs that gap of air to create pressure in the tank, giving you a better vaping experience. Check out the manufacturer's recommendations for how much to fill the tank and stick to it.
How to keep eliquid from getting into chimney?
The easiest way to prevent your eLiquid from getting into the chimney is to make sure you don't overfill the tank. You should also take care in how you fill the tank. Take your Max VG liquid and tilt the tank, squeezing the e-juice down the side then slowly tilting it back up.
What are vape o-rings made of?
Most vapes have o-rings made from a rubber material. The rubber can get brittle and dry with age. If you've had your vape for a while, it's worth checking on the quality of the o-rings if you are suddenly experiencing leaks. The o-rings should be firm but pliable.
How strong are e-cigarette tanks?
E-cigarette tanks are pretty strong, but they aren't invincible. They are mostly made of glass, which means there is always a chance they could get broken or cracked. Most vapers use their e-cigarettes all day long, meaning the device journeys from car to the office and back home again. They might get shoved in a pocket or tossed on a desk. So it's no wonder that damage happens to the tank occasionally. If you start to experience leaks, hold your vape up to a light and examine the tank closely. The light will make it easier to see hairline cracks or chips in the edges that could be causing the leaks. If you see any signs of damage, order a replacement tank right away (and consider investing in a carrying case for your vape!).
Why is VG liquid thicker than other liquids?
Because of the thicker consistency, they are less likely to leak than liquids made from other bases.
Why do I have to twist my e-cigarette?
That's because overtightening can cause damage to the o-rings, or rubber rings, that create the seal. If you damage those, it's very easy for liquid to come out. So give your e-cigarette a tight twist to ensure it's closed, but don't twist it as hard as you possibly can.
Why does my vape pen blink?
8 Reasons Why Vape Pens Blink. 1. Low or Dying Battery. The most common reason for a flashing light on your vape pen is to indicate that your battery is running low. When there is not enough power coming from the battery, your vape will give a blinking light (a red light with some devices) to let you know it needs to be charged.
Why is there an LED light behind my vape?
You may want to know that the LED light behind your vape’s fire button is used by most manufacturers to give you any warnings or signals that could interfere with your vaping experience , especially if the device doesn’t have a digital display.
What to do if your vape connectors are skew?
If any liquid has gotten on the connectors, or any of the threading is skew, it might be stopping your device from making a proper connection. With clean hands and on a clean surface, try taking apart the various parts of your vape and wiping them with a dry cloth or tissue. Then, reassemble it and try to have a hit. 5.
How to stop vape from firing?
To test if this may be the issue with your vape, press the fire button three times in quick succession, then give it another go.
What happens if you screw a battery mod on too tight?
If your tank has been screwed on too tightly or not tightly enough, it won’t make a connection and will give you a warning, usually in the form of a flashing light.
What happens if you drop a vape?
If at any point your vape has been dropped, the impact may have dislodged some of the smaller components inside your device . The more common of these is the connection between the battery mod and the tank: the 510 pin.
Why is my fire button stuck?
Unfortunately, like most electronics, vape devices do have some weaker components, mainly, the firing button. Because of general wear and tear or because some liquid leaked underneath, your fire button may become stuck.
What does it Mean when your Vape Pen Blinks
Vape Pens will blink for a variety of reasons from dead batteries and severed connections, to a coil needing to be connected, replaced and so much more. And there is no universal blinking formula that you can look at to find out what is happening when a vaporizer starts blinking this or that color, this or that many times.
Vape Pen Blinking 3 Times
A wide variety of vape pen lights will blink 3 times. There are a few possible reasons for which this can occur. Sometimes the light will blink 3 times after the after turning the vape power on or right before shutting it down.
Vape Pen Blinking 10 Times
If a vape pen is blinking 10 times it is very likely that the PCB chip, aka the brain of the vape is telling you that the battery is dead. Eventually there will not be enough power to even see this sequence of blinking, but if you happen to come across the 10 blinks, it is time to get a new vape.
Vape Pen Blinking Guide – Find your Vape Pen Below
Is a vape pen blinking 3 times, 4 or maybe even 10 times? Vaporizers can’t talk to us, so engineers have designed the chips that operate them to communicate with us via blinking lights. With all of the different vaporizers in the market, there is no universal blinking light language.
Why is my Vape Pen Blinking Blue or Other colors
If your Vape Pen is blinking a certain color when you try to operate it, the number of blinks is what you want to pay attention to and you can reference the user manual or use our Vape Blinking Guide above to find your vape. The number of blinks can mean a variety of things, including issues with a battery, coil or something else.
Vape Pen Light Meaning
As we said above, the exact meaning of the light color and blinking sequence will vary from vape to vape. It is always best to consult the user manual to know exactly what is going on with the vape. A good rule of thumb is that the light color is likely an indicator for heat or voltage setting.
Why does my Vape Pen Blink when Charging
Ultimately it depends on the vaporizer in question so you should always consult the user manual first. If the vape is continuously blinking when it is placed on the charger, then it is likely that the vape blinks to show that it is charging. And when completely charged, that blinking usually stops or stays constant.
Why is my wicking cartridge clogged?
Sometimes the cartridge may seem clogged or you may not experience optimal performance because there isn't enough concentrate available or the concentrate isn't properly reaching the wicking material to wick correctly . If the battery doesn't have enough power, the performance may lack severely, and that may cause you to think ...
What happens if your airflow is blocked?
If your airflow is completely blocked, it is likely that it has become hardened while in the airflow inlet. Next, check to make sure that you still have an adequate amount of concentrate left inside of your cartridge. Lastly, make sure you have enough battery power available to properly activate the coil and its ability to heat the material.
Can concentrates cause clogging?
Alternative products that use concentrates have always suffered from clogging issues. While it may seem like it's just you, it is widespread throughout the industry and everyone has run into the same problem at least once. However, there are many manufacturers creating innovative products and using advanced technology in an effort to prevent ...
