It always seems like Temp Protect is a warning, but as pointed out, it's just stating it's working, not broken. If you hit temp protect as soon as you hit the fire button though, that may mean you're using too high a set wattage to start out with, so if that's the case, roll that down a bit.
Full Answer
Why won’t my vape work in the Cold?
If you regularly vape on oils or concentrates, you’re likely to get clogs in your cartridge especially when the weather is cold. When clogs happen this interferes with airflow meaning you can’t draw any vapor. You can sort out this problem by Gently Blowing into the mouthpiece
How does temperature affect vape wire resistance?
When you vape with Kanthal (the most popular vape wire), that resistance value doesn’t change. That’s a particular property of Kanthal: its resistance is static regardless of its temperature. For TC vaping, you’ll use wires that have a known resistance-increase as their temperature rises.
How does temperature control work in vape mods?
Temperature control (TC) in vape mods is a technological solution for dry and burnt hits. It also creates a consistent vape while taking longer drags because the temp stays the same—instead of getting hotter. The user chooses the temperature limit, typically from a range of 300°F to 600°F (100°C to 315°C).
Why is my vape flashing and not smoking?
The more common of these is the connection between the battery mod and the tank: the 510 pin. If the 510 pin has dropped or become stuck in the ‘On’ position, your vape won’t fire and will most likely give you a flashing light. If the staff at your local vape shop don’t do repairs, it might be time for a new mod.
Why is my vape consistent?
Vape consistency: By having control over the temperature your coils can rise to, the vape will be consistent from puff to puff, and even within one puff. In regular wattage mode, the hits are more inconsistent because the heat of the coil changes based on the length of the hit.
What is “temperature control” vaping?
Temperature control (TC) in vape mods is a technological solution for dry and burnt hits. It also creates a consistent vape while taking longer drags because the temp stays the same—instead of getting hotter. The user chooses the temperature limit, typically from a range of 300°F to 600°F (100°C to 315°C). The power sent to the coil then automatically adjusts to keep the coil—and your vape—at the chosen temperature.
What is the best wire for vaping?
TC vaping generally uses one of these four types of vape wires: 1 Stainless steel: this wire is very popular and readily available. It comes in various grades such as 304, 316, 316L, 317, and 430 but the most common is SS316L. SS can be used in wattage or temperature control mode. 2 Nickel 200: commonly known as ni200, it was the first temperature control coil but it’s less common now due to some vapers having sensitivities to nickel. 3 Titanium Grade 1: otherwise known as Ti. It works well in TC but the user has to make sure it does not get overheated. 4 Nickel ferrous: also known as NiFe, comes in various grades such as 48, 30, 52, 70 and can be used in either mode, but is not widely available.
How to fix dryness in vape?
When vaping in TC, if you do notice any dryness when you’re low on juice, adjust the temperature down. If your mod has wattage control in TC, you can adjust that too. Higher is usually fine, but don’t go too low; as mentioned earlier, your mod should limit your wattage when the set temp is reached, but it won’t compensate when the wattage is set too low.
What type of wire do you use for vaping?
Next, you must vape with the right wire type. TC vaping generally uses one of these four types of vape wires: Stainless steel: this wire is very popular and readily available. It comes in various grades such as 304, 316, 316L, 317, and 430 but the most common is SS316L. SS can be used in wattage or temperature control mode.
How does TC vaping work?
For TC vaping, you’ll use wires that have a known resistance-increase as their temperature rises. The mod checks the resistance of the coil at room temperature, then it continues to monitor it as you vape. The resistance change is converted into a temperature increase and the mod adjusts its power to maintain the selected temperature. Think of it as a car traveling in cruise control. To maintain a speed, more power is needed to go up a hill than down a hill… but the speed would stay the same.
Why do TC coils last longer?
TC coils can last longer than normal power-mode coils, and wicks last a lot longer too because they’re not exceeding the designated temperature necessary for a good vape.
What is temperature control in vaping?
Vape temperature settings control your vaping experience, quality, and effects. With vast steps forward in vape pen technology, premium vape pens can now deliver an unrivaled user experience. This is, in large part, due to the improvements in temperature control and reliability.
What is the best battery for a vape pen?
The thicker vapor does come at a cost. It uses up your concentrates faster and requires more battery power. The best vape pen batteries are Lithium-ion. These have a higher energy density and can better handle the energy requirements of medium-temperature vaping.
What temperature do dabs need to be?
Medium-temperate dabs use a range between 450℉ and 600℉. It creates a bigger vapor cloud, but delivers less flavor than the lower temperature setting. It’s a good in-between option for people who care about taste but prefer thicker clouds.
Does low temperature vapor have less flavor?
This setting produces a thinner vapor than higher temperatures. But thin vapor doesn’t mean less flavor. In fact, the low-temperature vapor is actually the most flavorful. The flavors and aromas in cannabis vapor come from the terpenoids (terpenes) within.
Is it safe to vape at high temperature?
High-Temperature Vaping. High-temperature vaping is not recommended. It is not as safe as vaping at low or medium temperatures. As well, the flavor quality is poorer and the experience is less reliable.
What does it mean when your mod is too hot?
Temperature alert: if the internal temperature of the device is over the supported temperature, the output will shut off automatically and the screen will display "Device Too Hot". This means you have used the mod for too long, and you should shut it down and wait for some time and then power on again.
What does "no atomizer" mean?
1. "No Atomizer" or "Check Atomizer". No atomizer / check atomizer alert: when the device does not detect an atomizer, the OLED screen will display "No Atomizer" or "Check Atomizer". ◆ Check the 510 electrode of your tank. Most of the devices have self-adjusting 510 connectors, but some have manually adjustable ones.
What does "atomizer low alert" mean?
Atomizer low alert: when the resistance of the atomizer is smaller than the lowest resistance of the device, the OLED screen will display "Atomizer Low".
What does "over X seconds protection" mean?
Over X seconds protection: the device will have some protection for safety use. When the power button is pressed for over the supported time protection, the output will shut off and the OLED screen will display "Over Xs Protection".
How does a vaporizer affect your high?
How changing vaporizer temp affects your high. There are a couple of ways changing your vaporizer temperature affects your high. At lower temperatures (290 to 330°F), your vaporizer will just begin to gently melt trichomes and release a vapor that may not be visible to the naked eye.
What temperature does a vaporizer melt?
At the highest temperatures (up to 445°F), a vaporizer will quickly melt trichomes and release a large amount of THC and other molecules. This will deliver a more impactful and intense high and produce a visible vapor.
What is a trichome in a vaporizer?
Trichomes are the resin glands of the cannabis plant. These glands sit on the surface of the plant material and are most concentrated in the female cannabis flower.
What temperature do terpenoids burn off?
In general, here are the boiling points of some of the most common cannabis compounds: THC: 314.6°F (THC-A 220°F) CBD: 320°F (CBD-A 240°F) CBN: 365°F. CBC: 365°F. THCV: 428°F.
What is low temp vaporization?
Low-temp vaporization is known to cause a more mild, relaxed feeling. At this temperature range, the experience will be less sedative and you’ll likely experience more pine and peppery flavors. Both THC and CBD will be expressed at this range, but it’s unlikely that you’ll experience a powerful high.
What temperature is dangerous for cannabis?
Anything above 445°F will risk combustion, which means that you’ll get some smoke from burning plant material. The unique boiling points of different cannabinoids and terpenoids also impact the high. At lower temperatures, some terpenoids and cannabinoids may not be expressed.
Is Namaste a good vaporizer?
If you’re in the market for a new vaporizer, Namaste Vapes is an excellent online source. Not only does Namaste have one of the largest selections of vaporizers on the web, but they also offer luxury portable and tabletop herb vaporizers for discount prices.
Why is my vape pen not producing vapor?
The most likely reason for this is that the firing pin doesn’t have proper contact with the battery, which can happen when the cartridge is screwed in too tight.
Why does my vape pen taste burnt?
If your vape pen produces an unpleasant burnt taste the reason could be either your vape pen’s temperature control is set too high, or the heating coil has residue on it . If your battery’s temperature is adjustable (a feature found in rechargeable vape pens), you can adjust it to a lower setting using its multi-click functions. Start by rapidly pressing button 5 times to turn it on, then press the button rapidly 3 times to alternate between low, medium and high temperatures. If it’s a problem with dirty heating coil, clean it with a cotton bud.
How to stop a vape pen from scratching?
The first problem is pretty straight forward, and the solution is to always make sure your vape pen has enough juice in it to avoid that scratchy feeling in your throat. Alternatively, you can check the way you’re drawing and reduce the number of puffs you take in succession. Sipping on some water can also relieve these symptoms.
How to check if a vape pen is working?
To avoid this, just ensure that the heating coil is pulled out to the point where it’s flush with the bottom of the cartridge, which you can do by using the tip of a pocket knife, a razor blade, or paper clip. Thereafter connect it to a charged battery to check if it’s “pulling” properly. Check out this video showing how to pull out the firing pin with the aid of a paper clip. Using this simple method your vape pen should be working A-Okay. A word of caution- please be careful not to cut yourself while doing this.
Why does my vape pen leak?
Leaving your vape pen in the car during hot weather can also cause the cartridge to leak. That’s because the cartridge seals expand and creating a passage for vape juice to leak out. Drawing too frequently on your vape pen, known as chain vaping, can also weaken the cartridge seals, causing vape juice to leak out.
How many times do you have to press the button to turn on a vape pen?
You usually have to click the button five times to turn on the battery. When taking a hit, ensure you hold the button down, otherwise you won’t be able to draw.
Why does my battery light purple?
Battery flashes a purple light 3x when you connect a cartridge. This is to prevent a short circuit that occurs from the cartridge being screwed on too tightly. Try cleaning the electrodes on both the battery & cartridge. If this doesn’t work slowly unscrew the cartridge to see when then button turns solid.
Why is my vape not connecting?
In some cases, the only issue is that your vape needs a quick clean and re-assembling. If any liquid has gotten on the connectors, or any of the threading is skew, it might be stopping your device from making a proper connection.
Why do you have to lock the fire button on a vape?
Some devices on the market allow you to lock the fire button to prevent your vape from accidentally firing while it’s in your pocket or bag.
Why does my vape pen blink?
8 Reasons Why Vape Pens Blink. 1. Low or Dying Battery. The most common reason for a flashing light on your vape pen is to indicate that your battery is running low. When there is not enough power coming from the battery, your vape will give a blinking light (a red light with some devices) to let you know it needs to be charged.
What happens if your 510 pin is stuck?
If the 510 pin has dropped or become stuck in the ‘On’ position, your vape won’t fire and will most likely give you a flashing light. If the staff at your local vape shop don’t do repairs, it might be time for a new mod.
What happens if you screw a battery mod on too tight?
If your tank has been screwed on too tightly or not tightly enough, it won’t make a connection and will give you a warning, usually in the form of a flashing light.
What happens if you drop a vape?
If at any point your vape has been dropped, the impact may have dislodged some of the smaller components inside your device . The more common of these is the connection between the battery mod and the tank: the 510 pin.
Why is my fire button stuck?
Unfortunately, like most electronics, vape devices do have some weaker components, mainly, the firing button. Because of general wear and tear or because some liquid leaked underneath, your fire button may become stuck.