As you may have guessed, this is caused by a malfunction in the draw activation sensor, and can occur when you accidentally blow air into your mouthpiece instead of inhaling or when your device is exposed to extreme wind. There may be other reasons for your sensor to malfunction, but these are the most common reasons.
Full Answer
How to use Joyetech ego AIO vape?
To vape, turn the device on by pressing the fire button 5 times in quick succession, then hold the button while inhaling on the mouthpiece. The button light on the kit will flash 5 times to indicate that it is on. The AIO is turned off in the same way. 4. Replacing the coil Your Joyetech eGo AIO Kit comes with 2 coils.
Why do vape devices get so hot?
However, that is especially true for a vape device because it is designed to generate a significant level of heat. A small, hot metal or plastic box in your pocket, purse, or desk drawer is not something you want to deal with.
How do I use my AIO vape?
Using the device To vape, turn the device on by pressing the fire button 5 times in quick succession, then hold the button while inhaling on the mouthpiece. The button light on the kit will flash 5 times to indicate that it is on. The AIO is turned off in the same way.
Why is my vape tank full of liquid?
This happens when you attempt to vape when the tank is empty, or when you don't realise the e-liquid level has run low, or if the coil hasn't been primed (after refilling, drip a couple of drops of e-liquid into the coil, then allow the tank to sit for 10-15 minutes once the coil is in place).
Why is my vape hitting by itself?
Poor connection. The most common reason for auto firing is a poor connection between the battery and the atomizer. This happens when there are some cracks in your coil or when there is an excessive gap between your coil and the threads on your battery. You might also find some liquid leaking from these cracks as well.
How do I fix my joyetech vape?
1:075:003 EASY Joyetech Cubis Spitback Fixes! Cubis, Cuboid Mini, and ...YouTubeStart of suggested clipEnd of suggested clipSo one tip is to just tip your mod upside. Down like so and then give it a little shake. So that aMoreSo one tip is to just tip your mod upside. Down like so and then give it a little shake. So that a liquid that's been sitting on the top of the coil.
How do I stop my vape from Spitbacking?
Flick the tank. ... Remove excess liquid from your tank's centre post. ... Fire your battery before inhaling. ... Reduce your airflow, or take smaller inhales. ... Turn up the power. ... Don't over-prime your coil. ... Use an E Liquid With More VG. ... Cover your mouthpiece.
How do you know if your vape is going to explode?
If an atomizer draws more current than a battery can safely provide, and there is no electronic cutoff in the device, the battery can overheat and go into thermal runaway. That can cause a fire, or—if the battery can't easily vent the heat—an explosion.
Are joyetech Vapes good?
Overall we were extremely impressed with the Joyetech Ego AIO. It is one of the best vape pens currently on the market for beginners looking to start vaping and quit smoking. It's also a great option for experienced vapers wanted a more portable stealthier vape device.
Why is my joyetech vape not working?
It won't charge/the battery is dead If your Joyetech AIO battery is not charging, firstly try plugging it into a different USB port or wall socket. If this doesn't work, try a different charger, but make sure you are using a Joyetech AIO USB cable.
What is vape Spitback?
Spitting, or spitback, is the name for the occasional super-hot droplets of e-liquid that shoot in your mouth when you're vaping. If you watch an RDA coil firing, you can sometimes see this happening, usually accompanied by popping sounds.
Why am I getting juice in my mouth when I vape?
A vape spitting is most often a sign that the vape juice has overly saturated and flooded the coils. When you fire the atomizer, the vapor coming up through the flooded juice makes the liquid spit and jump up the chimney and through the mouthpiece.
Is it normal to taste vape juice on your lips?
Getting vape juice in your mouth might be unpleasant, but you should not worry too much. The juice may taste bad, but it is mostly made from ingredients that are not harmful, such as propylene glycol and vegetable glycerin, which can also be found in many food products.
How long does it take for your lungs to heal from vaping?
After one to nine months: clear and deeper breathing gradually returns; you have less coughing and shortness of breath; you regain the ability to cough productively instead of hacking, which cleans your lungs and reduce your risk of infection.
Will my vape explode if I put it in water?
5 – Store Your Vaporizer Safely & Away from The Sun As vaporizers are electronic devices, they are easily damaged by water. In fact, water damage can cause the sparks that lead to a fire. Make sure you store your device in a cool and dry place when not in use and clean it thoroughly between charging sessions.
What brands of vapes explode?
Vape pen fires and explosions can take place with any brand or type of e-cigarette if the device uses a lithium-ion battery....Which Vape Pens Explode?Wotopho's Phantom.Wismec Reuleaux RX200.Kangertech.SMOK.Sigelei Fuchai 213.CoilART Mage.eGo.iJoy.More items...•
Why is my vape pen blinking?
If you go to use the vape pen and the LED light is blinking while you are holding down the button, that is signaling one of two things - either your battery is dead OR it is not recognizing your atomizer. If you know that your device is definitely charged, check your coil.
How to keep atomizer from spinning?
Once you get the atomizer screwed onto the threads, the atomizer will just keep spinning the child-lock once it gets tightened to a certain degree, so at that point you need to push down on the child-lock ring on the top while simultaneously screwing the atomizer on tight.
How much liquid do you need to atomize a vape?
You will need to prime your atomizer with e liquid for it to get saturated before you start vaping, for this atomizer you need to drip 5-6 drops of e liquid directly down the small hole at the top of the atomizer itself.
What does the LED light on an AIO mean?
The little LED light inside your AIO is a lot more useful than you may think, there's actually a series of light sequences that signifies different warnings. If you notice, when you press the button the LED light comes on and when you release the button the light goes away then comes back on a second later.
Where do you fill the E liquid in an AIO?
If your AIO is split two different colors, for example red and white, you should see where the two colors meet at the glass window; if you have a solid colored AIO there should be a line half way up the glass window, off to the side, that reads “MAX.” Whether you have a split color meeting or you have a line, that's where you fill the e liquid up to. If you go past that line, the e liquid will over spill once the top cap with atomizer is attached.
Can you fill up Joyetech AIO?
Now that you've got the atomizer primed and installed it's time to fill it up. The Joyetech AIO uses the same access point to fill up as it does to change out the atomizer, so before you reattach the cap you have to add some e liquid to the tank.
Can you use a vape pen without an atomizer?
Some people are a fan of one or the other and some people can't notice a difference so just go ahead and try them both out to see how you like them. Your vape pen should come turned off without an atomizer installed, you will need to turn it on, install a primed atomizer and fill it up with e-liquid to begin vaping.
Why is My Vape Auto Firing a Dangerous Issue?
However, that is especially true for a vape device because it is designed to generate a significant level of heat.
How to stop vape from auto firing?
Never leave a fully assembled auto-firing device unattended, because you never know when it might reach the point of no return. By interrupting the electrical circuit, you can prevent the device from receiving the power it requires to auto fire.
Why does my phone auto fire?
A fried chip or switch is one of the most common causes of auto firing. If you’re able to dismantle your device, look for any signs of damage on the switch and chip. You may not always be able to see the issue visually, so it may be a good idea to have them replaced regardless.
Is vaping dangerous?
If your vape is firing on its own it can be a nerve-wracking experience, and a dangerous issue if left unchecked. Even if you’ve never had to deal with this scenario, it’s important to know the signs, possible causes and how to handle it.
Is it time to upgrade a vape?
If you’re using an older vaporizer, or you just don’t feel comfortable sticking with one that’s auto fired in the past, it might be time to upgrade. At VaporFi, we offer a wide range of top-of-the-line vapes, including box mods, squonk mods, starter kits and more. Our stock includes many different brands, styles and price points to choose from, and there’s truly something for everyone. Browse our selection and find yourself a new vape today, so you can have peace of mind and an enjoyable vaping experience once again.
Can you remove batteries from a mod that has been auto fired?
Even if you believe that you have successfully made the necessary repairs, always remove and store the batteries when your mod is not in use.
Is it a risk to continue using a device that has demonstrated an auto firing issue?
At the end of the day, choosing to continue using a device that has demonstrated an auto firing issue is a risk. You can never be sure when the issue will return, and because it’s such a serious problem, it should be taken very seriously.
Why is my AIO flashing but doesn't hit?
My AIO flashes but doesn't hit for two reasons one being the battery is too low to fire the coil or it's low in power. I would try to recharge it until the light goes out and see if it did get a good charge beyond the ability to turn on your light. If that doesn't work try another coil.
How to reset a mod?
According to a couple of threads I saw elsewhere this is not a vent hole as one might expect, but is actually the access are to conduct a hard reset on the mod. Use a pen or paperclip to gently check the inside for a tiny button ( similar to the reset button on many wifi routers or other electronic devices). Press the button for a few seconds and this should perform a hard reset on the control board inside the mod. That might fix the issue you are experiencing.
Why is my center pin stuck?
It could be that your center pin got pushed down when you were cleaning it . Try pulling it back up a bit. Even the center pins with the spring can get stuck.
Kcoc Full Member
I have had my sigelei 20w going on the 2nd day now. On more than a couple of occasions I will press the fire button to have a vape and the device will completely shut off and will not come back on until I take the battery out and turn it back on. It has happened while using a sony vtc4 and an efest battery, both are 18650.
realsis Ultra Member Verified Member ECF Veteran
My guess would be that you are experiencing a short likely in your atomizer coil. I would check it carefully or rebuild a new one. Make sure everything is as it should be with the coil and atomizer. Once you fix it that should do the trick. It is a safety feature.
Kcoc Full Member
It is doing with two different coils. One at 1.1 the other at 1.4 ohms. It has happened with both the batteries mentioned above both batteries had a charge around 4volts. It usually happens when I get around the 18w range which is where I found my kayfun performs amazingly with the 1.4 coil.
Kcoc Full Member
The same batteries are working perfectly in my svd but no I don't know anyone else who uses them. I am the only one of all my friends who vape the rest still smoke regular cigs. And the closest b&m is about an 1-1.5 hour drive.
Recycled Roadkill Ultra Member ECF Veteran
I've had this happen, sometimes frequently with my Vamo 5, SVD, and 134. It's never occurred with my MVP 2, or Coolfire II.