Low batt ery alert: when the battery voltage is below the allowed voltage of the device, it will display that kind of message. ◆ If you continue to press the fire button, the device shows "Lock" and will not work. We suggest you to change another set of batteries first.
Why is my vape leaking?
Another common leakage issue is how much you are tightening your tank. You'll need to unscrew your vape when you fill it with Max VG eLiquid, change the coil, or clean it out. When you put it back together, you want to ensure it's tight enough that the rubber rings on your vape create a seal against leaks.
Why does my vape say Smok?
Seeing either of these SMOK error messages is a big red flag, and you should immediately stop vaping for your safety. The cause of these two messages is a short circuit in either your mod or tank, which is a serious but sometimes repairable problem. Here’s what to do if you receive one of these errors:
How do I unlock my vape?
Local Vape Shop -----Might be simple. Vendor who sold it ---see if they will repair or replace or advise. If your power is locked, quickly press the power button 5 times to unlock. If your power is locked, quickly press the power button 5 times to unlock.
Why is my vape screen dark?
If the vape appears to be on, but the display is dark, you may have accidentally activated “stealth mode.” Quickly press the fire button three times to turn off stealth mode. If this doesn’t work, you may need to upgrade your firmware. Otherwise, the problem might be caused by screen damage or another related issue.
How do I unlock my vape?
0:171:02How to Lock and Unlock a Uwell Crown 4 / IV Mod! - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo let's unlock it hold down the power button and the UP. Button at the same time.MoreSo let's unlock it hold down the power button and the UP. Button at the same time.
How do you lock and unlock a Smok vape?
0:100:48SMOK G-Priv 2 - How to Lock and Unlock the Firekey (Fix ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt's pretty easy one two three clicks of the fire button fire key unlocks oh we're beeping look atMoreIt's pretty easy one two three clicks of the fire button fire key unlocks oh we're beeping look at that Nathan had we go into the lock mode again one two three fire key locked oh I can't fire oh.
How do you take the power lock off a vape?
4:028:23SMOK NORD 4 - Now with More Power! - YouTubeYouTubeStart of suggested clipEnd of suggested clipOne two three and it's going to lock the entire device lock the wattage lock it so you can't vape itMoreOne two three and it's going to lock the entire device lock the wattage lock it so you can't vape it. And then if you want to turn it on or off will be five clicks one two three four.
Why is my vape not unlocking?
The most common cause of having a locked vape is a dead battery. Try charging your vape for 10 minutes and unlock it to see if this has any impact on it. You will know that your vape is charging as most vapes emit a light to indicate the charging process.
How do I reset my Smok vape?
Reset the tank - You can 'reset' the tank by removing it from the mod, checking the screws are tight and pressing the fire button. Then re-attach your tank and select “n” when you are asked if it is a new coil.
How do you unlock Smok Nord?
SMOK NORD 4 pod system kits are shipped in a locked position. In order to unlock your device, simply click the 'power button' three times quickly. This will unlock your SMOK NORD 4. The other possible problem is that it is not charged.
How do you unlock Watts on Smok?
Three clicks of the fire button/bar allow you to switch vaping modes (wattage or TC of Ni, Ti, SS). Pressing both adjustment buttons at the same time locks and unlocks the wattage.
How do I unlock my vape geek?
If your Geek Vape Aegis Hero isn't hitting when you hold the fire button, you should first check to confirm that you haven't locked the device. Press the fire button five times to unlock it. If the Aegis Hero still isn't hitting, the screen should display an error message telling you what the problem is.
What does it mean when your mod is too hot?
Temperature alert: if the internal temperature of the device is over the supported temperature, the output will shut off automatically and the screen will display "Device Too Hot". This means you have used the mod for too long, and you should shut it down and wait for some time and then power on again.
What does "no atomizer" mean?
1. "No Atomizer" or "Check Atomizer". No atomizer / check atomizer alert: when the device does not detect an atomizer, the OLED screen will display "No Atomizer" or "Check Atomizer". ◆ Check the 510 electrode of your tank. Most of the devices have self-adjusting 510 connectors, but some have manually adjustable ones.
What does "over X seconds protection" mean?
Over X seconds protection: the device will have some protection for safety use. When the power button is pressed for over the supported time protection, the output will shut off and the OLED screen will display "Over Xs Protection".
What does "check USB" mean?
Check USB alert: when the voltage of the USB charger is equal or greater than the supported voltage, the OLED screen will display "Check USB" after inserting the USB Cable or vaping.
Where is the liquid in a vape?
There is vape liquid in the chimney. The chimney of your e-cigarette is the hollow tube in the middle of your tank. If liquid gets into this area, it can cause some minor (but annoying) problems like spitting, popping, and leaking. The easiest way to prevent your eLiquid from getting into the chimney is to make sure you don't overfill the tank.
What happens if you overfill a vape tank?
If you overfill, the liquid will seep into other areas of the tank and seep out. You shouldn't fill your tank all the way up, either. Your vape needs that gap of air to create pressure in the tank, giving you a better vaping experience. Check out the manufacturer's recommendations for how much to fill the tank and stick to it.
How to keep eliquid from getting into chimney?
The easiest way to prevent your eLiquid from getting into the chimney is to make sure you don't overfill the tank. You should also take care in how you fill the tank. Take your Max VG liquid and tilt the tank, squeezing the e-juice down the side then slowly tilting it back up.
What are vape o-rings made of?
Most vapes have o-rings made from a rubber material. The rubber can get brittle and dry with age. If you've had your vape for a while, it's worth checking on the quality of the o-rings if you are suddenly experiencing leaks. The o-rings should be firm but pliable.
How strong are e-cigarette tanks?
E-cigarette tanks are pretty strong, but they aren't invincible. They are mostly made of glass, which means there is always a chance they could get broken or cracked. Most vapers use their e-cigarettes all day long, meaning the device journeys from car to the office and back home again. They might get shoved in a pocket or tossed on a desk. So it's no wonder that damage happens to the tank occasionally. If you start to experience leaks, hold your vape up to a light and examine the tank closely. The light will make it easier to see hairline cracks or chips in the edges that could be causing the leaks. If you see any signs of damage, order a replacement tank right away (and consider investing in a carrying case for your vape!).
Why is VG liquid thicker than other liquids?
Because of the thicker consistency, they are less likely to leak than liquids made from other bases.
Why do I have to twist my e-cigarette?
That's because overtightening can cause damage to the o-rings, or rubber rings, that create the seal. If you damage those, it's very easy for liquid to come out. So give your e-cigarette a tight twist to ensure it's closed, but don't twist it as hard as you possibly can.
thatsthatbruce New Member
hey guys, left the shop in a hurry so didn't bother to hit it and test it out. First I had the "low ohms" then trying to fix it I ended up power locking it. Anybody know how to fix this? Clicking the reset button hasn't done anything, also powered it on and off, resetting both while it's on and off. Still not fixed.
thatsthatbruce New Member
just bought this but left the shop without hitting it. I click to hit it but get "power locked" on the screen. I tried the reset pin on the bottom but didn't do anything. I'm assuming this is a child lock that I accidentally activated. Anybody with a Smok vape (assuming they use the same software) or a Q Box that knows how to unlock it?
pfaber11 Ultra Member ECF Veteran
Have you tried holding down the plus and minus buttons at the same time.?
BrotherBob ECF Guru ECF Veteran
hey guys, left the shop in a hurry so didn't bother to hit it and test it out. First I had the "low ohms" then trying to fix it I ended up power locking it. Anybody know how to fix this? Clicking the reset button hasn't done anything, also powered it on and off, resetting both while it's on and off. Still not fixed.
Majo9681 New Member
If your power is locked, quickly press the power button 5 times to unlock.
Mychell New Member
If your power is locked, quickly press the power button 5 times to unlock.
Kim Morris New Member
If your power is locked, quickly press the power button 5 times to unlock.
Why is my vape not working?
If the vape appears to be on, but the display is dark, you may have accidentally activated “stealth mode.”. Quickly press the fire button three times to turn off stealth mode. If this doesn’t work, you may need to upgrade your firmware. Otherwise, the problem might be caused by screen damage or another related issue.
What is the best brand of vape?
There’s no doubt that SMOK is one of the vape industry’s best brands, crafting top-of-the-line mods and pod systems like the SMOK Nord, SMOK Morph, SMOK NOVO, and so many more.
How long should I soak my SMOK coil?
Allow the coil to soak inside of the tank for about 20 minutes, then take a few dry puffs before using the fire button to begin vaping. Check your output wattage. Make sure that your mod’s output matches the recommended output wattage on the side of the SMOK coil.
How to fix a coil that tastes burnt?
Here are a few suggestions for how to fix coils that taste burnt: Replace your coils when needed. Expect to replace coils every few weeks or so (or about 50mL of e-juice, according to SMOK guidelines). Burnt-tasting coils are usually the first sign that it’s time to switch them out for new ones.
Why is my ohm error so high?
If you’re working with a rebuildable atomizer (RBA), the resistance of your coils may be too high or low. Adjusting the resistance will usually clear the error. Or, you may need to tighten the screws properly. Other reasons you may see an ohm error include: The resistance detection component of your device is broken.
Can you fix a dead vape mod?
Luckily, as just about any seasoned vaper will tell you, problems with a vape mod are often very easy to fix, being forced to replace a dead mod is a pretty rare occurrence. Often, a seemingly serious mod issue is simply the result of user error and can be resolved in next to no time.
