The message “Check Atomizer” means that your vape mod isn’t detecting the connected atomizer coil at all. That may mean that the tank isn’t assembled correctly, that the tank doesn’t have a firm connection with the mod or that the coil itself has a problem. Use these steps to troubleshoot a “Check Atomizer” error.
Why does my vape say “check atomizer?
All vapers will experience this problem at some point in their journey, and it can happen suddenly and without any apparent cause. Thankfully, while a bit frustrating, this is an easy problem to fix. “Check Atomizer” or “No Atomizer” will appear when your vape mod or pod vape isn’t reading your coil correctly.
Why is my Atomizer so high?
I would assume that high atomizer means hi ohm value... either there is a faulty connection with the coil leg to the atty, a loose fitting 510 connector.. as things heat up things expand and can cause a poor connection... my first thing to check is the screws in the atty if its a DIY coil...... Thanks guys. Aren't vaping buddies the best?
What is the difference between a vape pen and an atomizer?
Vape pens and mods are the power supply unit and the atomizers are responsible for vaporizing e-liquid. The term atomizer can refer to different things. It can refer to devices containing coils or it's also used to refer to the coil inside the device.
Why does my atomizer sound like it's not working?
No atomizer sounds exactly as it sounds like. This warning is displayed as "no atomizer" or "check atomizer" and it pops up if the device being used can't read the atomizer. This typically happens because the coil isn't screwed on properly, there's an issue with the 510 connection, defective or bad coil, etc.
How do you fix a high atomizer on a vape?
RecapClean all contacts on battery/mod, tank or pod.Remove and reinstall the coil (after cleaning)Try a new coil.Check the 510 pin and see if you can adjust it (mods/tanks)Try another tank on your mod.Try another mod with your tank.Adjust base of coil carefully if you can (mainly sub-Ohm coils)
How do I reset my vape atomizer?
0:000:31How To Do A Factory Reset on Your IQC Vaporizer - YouTubeYouTubeStart of suggested clipEnd of suggested clipOnce the reset is complete the vaporizer will vibrate and button lights will. Turn. Off you.MoreOnce the reset is complete the vaporizer will vibrate and button lights will. Turn. Off you.
How do I fix my atomizer connection?
0:183:13Puffco Peak Atomizer fix - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe've got a single q-tip. I'm going to show you guys what to do when your atomizer breaks up closeMoreWe've got a single q-tip. I'm going to show you guys what to do when your atomizer breaks up close remember you can also use a recharge or rebuild kit for this.
How do you fix too high ohms?
SMOK Ohms Too High or Too Low Typically, pairing the proper SMOK-branded coils with your SMOK device is the easiest way to fix this problem. If you're working with a rebuildable atomizer (RBA), the resistance of your coils may be too high or low. Adjusting the resistance will usually clear the error.
How do you check a vape atomizer?
0:383:22How To Fix 'Check Atomizer' - YouTubeYouTubeStart of suggested clipEnd of suggested clipSometimes juice likes to sit in the 510 of the device. So make sure you give this a clean also ifMoreSometimes juice likes to sit in the 510 of the device. So make sure you give this a clean also if there is juice or dirt inside the 510. Then your device may not be able to read your tank or RDA.
How do you fix a vape that won't smoke?
Check your tank to make sure you have enough e-liquid. If your tank is completely full but you still have weak vapor, it is possible that your atomizer or coil has been flooded. If this happens, simply take your atomizer apart and clean it with a paper towel or gently blow through it to get the excess liquid out.
How do I reset my Smok vape?
Reset the tank - You can 'reset' the tank by removing it from the mod, checking the screws are tight and pressing the fire button. Then re-attach your tank and select “n” when you are asked if it is a new coil.
How do I clean my vape atomizer?
To carry out this method, simply submerge your atomizer in some isopropyl alcohol for 30-60 minutes. This will cause the hardened dirt to become saturated and it will break down and pull away from the atomizer when you wipe it down with your cotton buds.
Why is my vape on but not working?
If you're using your vape pen's battery correctly but it's not working, inspect the battery's contact point for damage or residue, like excess oil. If it seems clogged, clean it with rubbing alcohol and let it dry before reconnecting it to the cart.
How do I fix my vape atomizer short?
Here are a few things to try to resolve atomizer short:Make sure the batteries are charging them properly by putting them in a separate charger.If using an RDA/RTA, check and see if the coil is touching the cap or deck.See if there are any breaks in the coil.Ensure that the coil is fully screwed into the tank.More items...•
How do I reset my Smok vape?
Reset the tank - You can 'reset' the tank by removing it from the mod, checking the screws are tight and pressing the fire button. Then re-attach your tank and select “n” when you are asked if it is a new coil.
What does no atomizer mean on Smok vape?
If you press the firing button on your e-cig and you see the message 'no atomizer' or 'check atomizer' it means that your vape mod is not reading the coil within your vape tank properly. It can be because of the 510 connection, the vape coil itself or the bits in between.
Why is my vape flashing and not working?
The most common ones being: Dying battery: Most often, the vape pen will blink ten times when the battery is too low for proper vaping. To fix the issue, recharge the battery. Low voltage: If the battery is charged but the pen is still blinking, it could be due to a low voltage.
Why is my atomizer checking?
Sometimes a check atomizer error can be caused by your coil. If cleaning your contact points didn’t work then you can try reseating your coil. You’ll want to take apart your tank as if you were changing the coil. Unfortunately, this can be a little bit messy and isn’t always convenient to do if you have a considerable amount of ejuice left in your tank.
What causes a check atomizer short?
Loose pieces of metal on the build deck will cause your mod to display “Check Atomizer” or “Atomizer Short”. Even very small pieces or trimmings of wire can cause a short or a check atomizer error on an RDA/RTA/RDTA. First, inspect the build deck closely for loose pieces of wire or other foreign objects.
What to do if your pod vape isn't firing?
If your pod vape isn’t firing, has a blinking LED and won’t fire, or says Check Atomizer or No Atomizer, you can follow a few of the same steps listed above for tanks: 1. Clean Your Contact Points. The first step you should try if your pod vape isn’t firing or says check atomizer is cleaning out your contact points.
Why won't my mod work?
Simply put, if your mod can’t read your tank and coil resistance properly, it won’t be able to deliver power and therefore won’t work. In this quick guide you’ll learn how to fix this common annoyance and you’ll be back to vaping in no time!
Why is my mod reading the new tank correctly?
If your mod is reading the new tank correctly, it could be a problem with the coil on your other tank. You might also want to clean the contact points on the tank that was giving you the error. If your mod is still reading “check atomizer” with a new tank, it’s probably a problem with your mod.
Why is my pod not firing?
Dirt or ejuice can prevent a proper connection between your pod and the device and this can cause the device to not fire or to throw a check atomizer/no atomizer error.
How to remove a tank from a mod?
Start by removing the tank from the mod and inspect the threading where the tank screws in for dirt , dust, or ejuice. Do the same with the 510 connector on your mod. Clean out the contacts with a paper towel, and screw your tank back onto your mod.
What is an atomizer in vaping?
Posted by Evelyn on August 8, 2019. Atomizers are the heart of vaping. Vape pens and mods are the power supply unit and the atomizers are responsible for vaporizing e-liquid. The term atomizer can refer to different things. It can refer to devices containing coils or it's also used to refer to the coil inside the device.
What are the problems with vaping atomizers?
The three most common atomizer problems are: Atomizer short warning. Atomizer low warning. No atomizer found warning. Those are the warnings that will typically pop up when you run into issues with the coil.
Why is my mod coil seated loose?
If the resistance of the coil is compatible with your mod then it could be that the coil is seated loosely, defective coil, or a faulty 510 connection. So always make sure your coil is seated and screwed in tight and if it's a bad coil then replace it.
How to fix an atomizer short?
How to fix an "Atomizer short" warning: Place batteries on an external charger to ensure they're both charging properly. For rebuildable atomizer users (RDA/RTA), make sure the coil is not touching the cap or deck and contains no breaks in your coil.
What is a RTA atomizer?
It can refer to devices containing coils or it's also used to refer to the coil inside the device. There are three types of atomizer devices: vape tanks , rebuildable drip atomizers (RDA), and rebuildable tank atomizers (RTA). These devices all use a coil that heats up and transforms vape juice into vapor.
Why does my atomizer give me a short message?
There could be a number of reasons why your device is giving you a short message. If you are using a rebuildable atomizer then your coil could be touching an unintended area like the deck or cap of the casing. If you are using a tank with a pre-built coil then the coil can either be defective or it could be loose.
How to tell if coil is bad on vape?
If you are using a vape tank with pre-built coils then check to make sure that the coil's base is connecting to your tank base. Pull the base of the coil out slight then reassemble the tank and make sure the coil is on tight. If the coil is on tightly and still reading atomizer short then you might have a bad coil. Sometimes there could be one or two bad/defective coils so try using a new coil from the pack to see if that is the issue.
Why is my vape not atomizing?
Sometimes the reason you see the “No Atomizer” message is because there is a problem with the coil. To check the coil for issues, you’ll first want to clean it. To do this, you’ll have to take the tank apart as if you were changing the coil. Once you have the coil by itself, you’ll want to clean with a paper towel the threading at the bottom to connect with the tank and the tank’s threading. Then pull and twist the bottom of the coil as you did with the tank’s 510 pin. Next, assemble your coil into the tank and the tank into the mod. This should erase the message, and you should be ready to vape .
Why is my atomizer saying no?
Check Your Coil. Sometimes the reason you see the “No Atomizer” message is because there is a problem with the coil. To check the coil for issues, you’ll first want to clean it. To do this, you’ll have to take the tank apart as if you were changing the coil.
How to fix a tank on a mod?
Remove the tank from the mod and check the threading where it connects to the mod. Do the same with the 510 connector. Clean the contacts and thread with a paper towel if there is gunk and debris. Once they are cleaned, tighten the tank back to the mod. This should fix the problem. If not, move onto the next step, adjusting the tank’s 510 pin.
What does it mean when a mod says no atomizer?
A “No Atomizer” sign in your mod can mean many things, but most of the time, it means that your box mod is not making a connection with your tank, coil, or atomizer head. This message will always appear if you press the firing button on a mod without a tank. However, sometimes, even when the tank and mod appear to be connected, there could be something preventing them from entirely making the connection.
What does it mean when you change your tank with a new one?
If you change the old tank with a new one, the message disappears from your mod, which could mean that your old tank is the problem. If the message still appears with a new tank, it could mean that your mod is the problem.
How to know if your tank is the problem?
If your tank is the issue, there are two things you can do. Check the contacts on the tank or check the coil.
Sebastian2011 New Member
Just got a new vaporesso target and using uwell crown tank with .25 coil. It works fine for a couple firings then pops up 'high atomizer'. I vape at 40 watts. Any info appreciated.
Bunnykiller ECF Guru Verified Member ECF Veteran
I would assume that high atomizer means hi ohm value... either there is a faulty connection with the coil leg to the atty, a loose fitting 510 connector.. as things heat up things expand and can cause a poor connection... my first thing to check is the screws in the atty if its a DIY coil......
Sebastian2011 New Member
Thanks guys. Aren't vaping buddies the best? I cranked the mod higher and it seems to have stopped. Fingers crossed. Cheers mates!!!!
What does it mean when you see the check atomizer?
If you’re still seeing the “Check Atomizer” message after performing the previous steps on this list, it’s likely that the coil has a manufacturing fault.
What does it mean when a vape mod says "Time Out"?
The message “Time Out” means that the length of your puff has exceeded what your vape mod’s puff timer will allow. Most vaping devices have built-in puff timers that help to prevent overheating. Suppose, for instance, that you’re carrying your vape mod in your pocket, and you’ve forgotten to lock it. You inadvertently push and hold the mod’s fire button when you sit down. Without a puff timer, that’s a potentially dangerous situation. With a puff timer, though, the device automatically cuts off, so its temperature stays in a safe range.
What does it mean when a vape mod says it has a short circuit?
When your vape mod tells you that it has a short circuit, it means that something is critically wrong with the electrical circuit connecting the battery in your vaping device to the atomizer coil. You might get the “Atomizer Short” message, for instance, if unexpected metal-on-metal contact occurs inside your tank. For example, maybe the coil in your tank is cross-threaded, so the coil is seated a little higher in the tank’s base than it should be, and that’s causing the tank’s chimney to touch the heating wire inside the coil. A manufacturing defect in the coil can also cause a short circuit.
What does it mean when you see an error message on a mod?
If you see any of the above error messages on your mod, it means that the resistance of the connected atomizer coil isn’t within your device’s supported range. There are two likely reasons why you might see that error message.
How to fix e-liquid leak in mod?
Has e-liquid leaked into the mod’s threading? Remove it with a paper towel. Reconnect the tank, making sure that it’s screwed down all the way. Are you able to vape? If not, continue with the next step.
What does it mean when your battery is low?
The message “Low Battery” or “Low Power” simply means that you need to charge your device’s battery. The conditions under which your device will display this message depend on the device’s firmware. In some cases, you’ll see the message when the battery’s remaining charge is too low for the device to operate at all. In other cases, the message simply means that the battery’s charge is too low for the device to operate at the wattage you’ve set. In that case, lowering the wattage may allow you to continue vaping for a little longer before charging the battery. Otherwise, though, you’ll need to charge the battery before you resume vaping.
What connectors are used in e-cigarettes?
In fact, most of the e-cigarettes on the market are mostly 510 connectors. Of course, other standard connectors have also appeared in the early days. But now, in order to unify standards, electronic cigarettes have adopted 510 connector.
How many ohms does a coil head need?
Make sure that the resistance of your installed coil head does not exceed 10 ohms, and install the appropriate coil head according to the mod’s recommended output to prevent the coil from being burnt
Does Aegis Legend work with Atomizer?
Yes, I found that many friends will have this problem. When we use any Atomizer , Aegis Legend works fine....
Can you replace a coil in an atomizer?
Please make sure that your atomizer coil is working properly. If you can’t judge it, please replace the spare coil for testing. If you replace the new coil, the atomizer can be used normally, then the coil head is damaged.
