If the coil burnt out within a short time, follows might be the causes to the issue: 1. Did not prime the coil before vaping. 2. The e-juice you fill is not enough. 3. Improper vaping settings of power. 4.you vape too frequently.
Full Answer
Are You having issues with your voopoo vape device?
More and more vapers got the voopoo vape devices, so may be some got the issues, today let’s check the issues and learn how to fix. the issue is the mod keeps asking ” New Coil (+)” or ” Old Coil (-)”, the vaping mod cannot detect the atomizer due to the short circuit of your tank or mod.
Why is my vape not getting power?
Improper vaping settings of power. 4.you vape too frequently. 1. Prime the coil with low wattage for the first several puffs. 2. Fill the e-juice over the minimum line of the tanks. 3. While vaping, please make sure the power of the mod is within the powe range that the coil can support.
Why is my voopoo Vinci vape leaking?
B) Cracked plastic: If your VOOPOO VINCI pod vape kit was dropped, or if it was in a pocket or purse that got bumped around a lot, it’s possible for the plastic to have broken and cause your VOOPOO VINCI to leak.
Why won't my voopoo drag turn on?
My other Voopoo Drag wouldn't turn on at all after the staff tried to charge it without the batteries in (I was charging them in my room). So I've assumed that's user error. Try taking the batteries out and putting them back in. This doesn't work for me 100% of the time but you never know, the odds could somehow be on your side.
Why is my Voopoo vape not working?
If the Voopoo Find S doesn't work when you press the fire button, the most likely cause is that the device is turned off. Press the five button five times quickly to turn it back on. If the device still isn't working, an error message should appear on the screen.
Why does my vape have no power?
While low vapor production can be associated with a low battery charge, more often than not it has something to do with your e-liquid. Check your tank to make sure you have enough e-liquid. If your tank is completely full but you still have weak vapor, it is possible that your atomizer or coil has been flooded.
Why is my Voopoo not firing?
The most common reason your VOOPOO DRAG X is not firing when you push the button is because it is locked. Your device can be locked and unlocked by simply clicking the fire button five times quickly. The VOOPOO DRAG X is shipped in a locked position to prevent accidentally turning on during shipment.
How do I reset my Voopoo vape?
0:000:31How To Do A Factory Reset on Your IQC Vaporizer - YouTubeYouTubeStart of suggested clipEnd of suggested clipOnce the reset is complete the vaporizer will vibrate and button lights will. Turn. Off you.MoreOnce the reset is complete the vaporizer will vibrate and button lights will. Turn. Off you.
How do I get my vape to work again?
Break Air Bubbles. If you have a pod-based disposable vape, you might get weak hits if air bubbles form around the pod's wicks. Tap the device gently on a table to break the air bubbles. After giving the wicks a few seconds to get wet, you should get some nice hits again.
How do I know if my vape is broken?
5 Signs That Show It's Time To Change Your Vape CoilYour Vape Tastes Burnt. This is probably the most noticeable thing that tells you your coil needs replacing, and something most vapers will experience. ... Your E-Cigarette Is Gurgling. ... Your Vape Tastes 'Strange' ... Your Coil Is Used Up. ... E-Cigarette Leaks.
How do I fix my Voopoo drag vape?
If you're unable to vape with the Voopoo Drag Max, you should first try unlocking the device by pressing the fire and “+” buttons simultaneously....Voopoo Drag Max Not VapingIf the error message is “Check Battery,” you need to recharge the device.If the error message is “Temp High,” the Voopoo Drag Max has overheated.More items...
How do you turn on a Voopoo vape?
0:272:59VooPoo Drag 2 Guide - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd coil resistance to adjust the power simply press the plus or minus buttons at the bottom of theMoreAnd coil resistance to adjust the power simply press the plus or minus buttons at the bottom of the device to increase or decrease the wattage depending on your quote.
How do you unlock a Voopoo vape?
0:100:47Voopoo Vmate 200W - How to Lock / Unlock the Fire Button - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd maybe it happened while it was in your pocket or something like that and you don't know how toMoreAnd maybe it happened while it was in your pocket or something like that and you don't know how to unlock it it is done like this hold down the UP button and the fire button at the same time.
How do you get Voopoo drag back to Watts?
To adjust wattage while in TC Mode, press fire button 4 times rapidly to activate wattage adjustment. You will see the “W” wattage icon flashing. The wattage can be adjusted from 5W to 80W.
How do you reset a vape mod?
Reset the tank - You can 'reset' the tank by removing it from the mod, checking the screws are tight and pressing the fire button. Then re-attach your tank and select “n” when you are asked if it is a new coil.
Why is my Voopoo Argus not working?
If your Voopoo Argus Air isn't vaping, the first thing that you should do is make sure the device isn't turned off. Press the fire button five times. If that doesn't resolve the issue, connect the Argus Air to your computer until the battery is fully charged, and then try vaping again.
Why does my vape taste burnt?
If you find your vape tasting burnt, its possible you are using an e-liquid with a very high VG level and that is too thick to saturate the wicks in the coils, leading to burning. Try using e-liquid that has a lower VG level (and higher PG level) to improve the flow of your e-liquid.
How often should I replace my vape coils?
Its best to replace your VOOPOO VINCI vape coils every 2-4 weeks.
Can you fill a pod with e-liquid?
A) Not enough e-liquid in pod: Check and make sure that the pod is filled with e-liquid. Its a good idea to re-fill your pod before it becomes completely empty, as the last small amounts of e-liquid will have a difficult time getting to the coil to saturate the wicks.
Why is my Voopoo Drag X not firing?
This is a surprisingly common issue that customers have and one of the easiest to solve. The most common reason your VOOPOO DRAG X is not firing when you push the button is because it is locked. Your device can be locked and unlocked by simply clicking the fire button five times quickly.
How does vaping work?
Vaping devices use the power of your inhale to pull e-liquid to the heating coils and mix with the vapour. If you pull very long and hard on the device it is possible for some e-liquid to be pulled into the airflow chambers. For all types of vaping, slow long drags are recommended.
Can you leave vapes in a car before flying?
It is best to empty all vaping devices before flying on a plane. G) Over Heating: If you leave any vape in a vehicle in the summer or in direct sunlight, it could leak. Over heating the device can cause the e-liquid to expand pushing it out through the coil and out the mouthpiece, causing it to leak.
bombastinator ECF Guru Verified Member ECF Veteran
Wow. That sucks. Could you be more specific? Complete power failure? is it throwing error messages?
Skeebo Vaping Master ECF Veteran
Try taking the batteries out and putting them back in. This doesn't work for me 100% of the time but you never know, the odds could somehow be on your side.
stols001 Moved On ECF Veteran
I don't want to say this is user error but with two, it may be? Do you have a friendly vaper relative or friend who may be able to troubleshoot with you?
bombastinator ECF Guru Verified Member ECF Veteran
I don't want to say this is user error but with two, it may be? Do you have a friendly vaper relative or friend who may be able to troubleshoot with you?
bombastinator ECF Guru Verified Member ECF Veteran
So, I noticed on the screen that although it showed 9 watts in wattage mode, the volts was 0 on the same screen. I'll try to take a picture of it at the next break. Could that be why no actual vapor is being produced, or is that normal for a wattage mode screen?
bombastinator ECF Guru Verified Member ECF Veteran
Ok, thanks. I'm also wondering whether the coil is the problem. The old one was almost unscrewed when I took it out. That would still be a 510 connector issue, right?
bombastinator ECF Guru Verified Member ECF Veteran
Thank you. Does that suggest anything I should do in order to produce vapor?
Why does my vape pop?
The action of heating liquid and turning it into vapor can cause the same reaction in your vape device. If the vape popping sound is excessive, it can ruin your enjoyment of vaping. It could also be a signal that’s something is wrong with your device or your liquid. Here are the primary reasons your vape pops excessively.
What does it mean when your wattage is low?
Your wattage or voltage might be too low. Low wattage means your device can’t heat the e-liquid into vapor quickly enough. The e-liquid overflows the tank, resulting in spitback and popping noises.
How to get e-liquid into your mouth?
Take Short Inhales. Taking a log, deep inhale can force e-liquid into the chamber and into your mouth. If you repeatedly have this problem, you’re probably pulling too hard. Let the coil and the wick heat the liquid. Inhale gently. You’ll take in pure vapor and have a more enjoyable, flavorful vape.
How to clean e juice from chimney?
Here, the solution is simple. Remove your drip tip. Roll up some tissue paper, insert it into the tank and soak up the excess water. Regular cleaning will help you avoid this problem.
Can you use pod mods at low temperatures?
If you’re using a pod mod or another small device, you’re using lower temperatures. Your small device will work better with a thinner liquid that heats quickly at low temperatures. If you’re having trouble with popping, try switching to an e-juice that contains some VG.
1. Low Battery
The first thing to check when you stop getting the desired flavor from your vape is your device’s batteries.
2. Cartridge
If you’re using a vape with a cartridge, this could be a sign that it’s time to swap out for a fresh one. Your device may be pulling just enough leftover liquid to give you a vapor cloud, but you definitely won’t be getting the robust flavor of a full, or even half-full, vape pod.
3. Atomizers
If you haven’t swapped out your atomizer lately, it might be time to do so. As you fill your tank and vape it down to zero again and again, small amounts of residue build up on your coil. This can cause the coil to heat poorly or unevenly. Sure, you will still get some vapor with continued use, but you definitely won’t enjoy the taste.
4. Adjusting Your Device
After checking for any parts that may have worn out, it’s time to try adjusting your device. Some flavors perform best in drip atomizers, while others do well in tanks. Adjusting your wattage upward may bring out flavors that were missing at first.
5. Steeping Your Liquid
On the less technical side of things, it could be that your liquid needs some time to steep before you vape it. The need to steep e-liquids is often a result of manufacturers shipping the products out immediately after mixing without letting them settle first.
