Full Answer
Why won’t my vape pen vape?
The problem could also be due to residue building up on the heating coil in which case you may need to clean it. You can do this by dubbing it with a cotton bud dipped in isopropyl alcohol, and you’re good to go. Even with the battery fully charged, your vape pen may still fail to produce vapor.
Why does my vape device burn when I vape?
You can also help to prevent overheating by ensuring that you never leave your device in direct sunlight or in your car. If you’re already maintaining a slow vaping pace, your device might simply be producing a burned flavor because it’s out of e-liquid.
Why is my vape pen blinking green?
Why is my vape pen blinking GREEN? When you are charging, it indicates charge completed. When you pressing power button 3 times continuously, the indicator light blinking green it indicates that the vape pen switches to high mode power output. Why my vape pen won’t hit?
Why does my vape Crackle and spit back?
A thin e-liquid can flood your coil, cause spitback and make your device crackle. This is especially likely to happen in a sub-ohm tank, which works at higher temperatures.
Why is my vape pen not working?
Inspect the battery contact; it may be clogged or coated. If this occurs, wipe the contact portion with a Q-tip soaked in rubbing alcohol, let the terminal dry, reconnect your cartridge to the battery and try it again. Do NOT overtighten your cartridge. Make sure your battery is turned on and fully charged.
How long does it take to charge a vision spinner 2?
The Battery LED button will light up orange, then blue and then white whilst charging and go out when fully charged. Typically charging will take 4-5 hours.
Why does my vape pen keep turning off?
Your battery may simply just be running out of power. Try switching to a fully charged battery and see if it makes a difference. If you are using a variable wattage device, try turning up the power. Don't overdo it, though, as too much power can burn the coil.
How do you charge a vision spinner pen?
0:141:06How to charge a vision spinner battery - YouTubeYouTubeStart of suggested clipEnd of suggested clipInsert the USB outlet into your AC adapter plug. It into any wall outlet. Take a spinner screw. ItMoreInsert the USB outlet into your AC adapter plug. It into any wall outlet. Take a spinner screw. It into the other end of your USB charging cable now.
Can you overcharge a vape pen?
Don't Overcharge Your Vape Battery By leaving your vape plugged in when it's reached its capacity (fully charged), that extra power doesn't do anything. Well, nothing good, anyway. Overcharging your battery can lead to problems like: Capacity loss, meaning your battery will lose its charge a lot faster.
Can I charge my vape with a phone charger?
It's always best to use the same cable that came with your device to charge your vape. Most phone chargers are fine, however some phone chargers where the cable cannot be removed from the charger are designed specifically for the product they came with.
How long does it take for your lungs to heal from vaping?
After one to nine months: clear and deeper breathing gradually returns; you have less coughing and shortness of breath; you regain the ability to cough productively instead of hacking, which cleans your lungs and reduce your risk of infection.
How do you fix a short circuit on a vape?
Here are a few things to try to resolve atomizer short:Make sure the batteries are charging them properly by putting them in a separate charger.If using an RDA/RTA, check and see if the coil is touching the cap or deck.See if there are any breaks in the coil.Ensure that the coil is fully screwed into the tank.More items...•
How do I get my vape to work again?
Break Air Bubbles. If you have a pod-based disposable vape, you might get weak hits if air bubbles form around the pod's wicks. Tap the device gently on a table to break the air bubbles. After giving the wicks a few seconds to get wet, you should get some nice hits again.
How do you charge a vision spinner without a charger?
4:155:05How to charge any E cig without a charger - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo positive wire up above top of the battery. Negative wire wrapped around the coils. Easy as thatMoreSo positive wire up above top of the battery. Negative wire wrapped around the coils. Easy as that and that was off so now it's on. It was off before so that's how you know it was charging.
How do you use a spinner 3 vape pen?
Vision Spinner 3 S User Manual: The battery is turned on/off by pressing the button five times in two seconds. When the battery is off, the button flashes three times in mixed color to indicate that the battery is activated after pressing the button five times in two seconds.
What is a spinner 2?
The Vision Spinner 2 is a 1600mAh vape pen that you can connect to your favorite 510 or eGo threaded tank or pre-filled vape cartridge. Works with any coil resistance over 1.2 ohms! The Vision Spinner 2 is a perfect battery for an e-cigarette beginner.
Why is my vape pen not working?
There are several reasons why your vape pen may not be working properly. Some of these causes are easy fixes, such as oil setting and getting stuck in your cartridge. Others are more technical, like a battery, atomizer or coil issue. Most of the time, your vape pen isn’t actually broken. More often than not, once you identify the issue with your vape pen, you’ll be able to troubleshoot.
How to prolong the life of a vape pen?
Let your vape pen rest between hits to allow the wick to re-saturate with oil. Getting into the habit of cleaning your coil, as well as priming new coils, is another way to extend the lifespan of your coil while avoiding burnt wicks.
How to avoid burning a vape?
To avoid burning your cannabis oil and damaging your coil, use a lower wattage and a lower temperature setting on your vape pen. Using a higher setting can result in the atomizer vaporizing the oil too fast, and burning the wick. Additionally, taking shorter pulls reduces the heat exposure. If you take large draws, you’re more likely to burn your oil.
How to turn on a vape pen?
Other vape pens use batteries with push-button atomizer activation. To turn these pens on, you’ll need to push the battery button five times quickly and hold the button down when you pull.
How to loosen up cannabis oil?
If you don’t have a hairdryer on hand, there are other ways to loosen up your cannabis oil. Heat a pot of water on a stovetop, until steam is produced. Then hold your vape pen over the steam for 20 seconds. This should result in the same effect as the hairdryer method, with your cannabis oil becoming less viscous.
Why is my atomizer not working?
Over-tightening: A common cause of atomizer problems is over-tightening. If you tighten the atomizer with too much force, it can sever the connection with the device . If the connection is intact but it still isn’t working, there may be an issue with the center pin (510 connector).
What does it mean when your vape cartridge is low?
If your oil level looks low, it could mean your oil has settled on one side. To resolve this problem, apply heat to the sides of the cart with a hair dryer method mentioned above and check to see if the oil level appears higher than it was.
Why does my vape stop hitting?
The most common reason why a disposable vape stops hitting is because it’s simply out of e-juice. The average disposable vape contains enough e-liquid for up to 200 puffs, but the operative phrase there is “up to.”.
Why is my vape not working?
Sometimes, a disposable vape that doesn’t hit isn’t working because the airflow sensor isn’t sensitive enough or because the sensor is blocked by condensation inside the device. If you cover one of the device’s intake vents with your finger ...
Why do you cover the vent with your finger?
Covering the vent with your finger also has another effect: It reduces the cooling effect of the incoming air, thus making the vapor warmer and more intense.
Why is my vape giving me weak hits?
If your disposable vape is giving you weak hits, one potential reason is that the nicotine strength simply isn’t right for you . Consider buying a device with a higher-strength e-liquid next time. If the device worked in the past and has suddenly become less satisfying, though – or you simply want to get a more intense hit from ...
How to stop vaping from overheating?
Slow down. You can also help to prevent overheating by ensuring that you never leave your device in direct sunlight or in your car. If you’re already maintaining a slow vaping pace, your device might simply be producing a burned flavor because it’s out of e-liquid.
How to get weak hits on a vape?
If you have a pod-based disposable vape, you might get weak hits if air bubbles form around the pod’s wicks. Tap the device gently on a table to break the air bubbles. After giving the wicks a few seconds to get wet, you should get some nice hits again.
Can you refill a vape?
If you want to refill your vaping device, you should buy a device designed for that. Before you try refilling a disposable vape, you should also know that, when the device is out of vape juice, the battery is also nearly dead – so you’ll probably end up wasting e-liquid.
Why does my vape pop?
The action of heating liquid and turning it into vapor can cause the same reaction in your vape device. If the vape popping sound is excessive, it can ruin your enjoyment of vaping. It could also be a signal that’s something is wrong with your device or your liquid. Here are the primary reasons your vape pops excessively.
How to get rid of spitback on Fire tablet?
If you get spitback from too much priming, press the fire button two or three times. This will help clear out the excess liquid. A little practice and experience will tell you just how much e-liquid is perfect for your device.
How do you know if a coil is braided?
The Coil Is Twisted or Braided. You might like the flavor you get from a braided coil, but those braids can leave spaces in the coil. When you introduce e-liquid, it can seep through the braids or coils. You’ll know it’s happening by the hissing, popping sounds. If you braid the coil yourself, try tightening it.
How to clean e juice from chimney?
Here, the solution is simple. Remove your drip tip. Roll up some tissue paper, insert it into the tank and soak up the excess water. Regular cleaning will help you avoid this problem.
Is PG in a tank thicker?
This is especially likely to happen in a sub-ohm tank, which works at higher temperatures. E-liquids with high propylene glycol (PG) content are usually thinner. You probably enjoy high-PG liquids because the flavor is excellent, but look for a thicker liquid if you have frequent popping.
Is it normal for a vape to pop?
Is your vape device starting to pop, crackle and spit back? Don’t worry, it’s not defective. A vape popping sound is normal for any device. Here are some quick, simple fixes.
Why won't my vape pen hit?
If you find your vape pen won't hit, the reasons and suggestions are as follows: Low battery, charge your vape pen. Remember to press the power button (if your vape pen has) when you are vaping. Loose battery, if your vape pen battery is not built-in, unscrew the battery and re-screw it back in.
What does it mean when your vape pen blinks red?
When you pressing power button 3 times continuously, the indicator light blinking red it indicates that the vape pen switches to low mode power output.
How long does it take for a vape pen to shut off?
Vaping over 8 seconds at one time, the vape pen will automatically shut off.
Why does my vape pen blink?
8 Reasons Why Vape Pens Blink. 1. Low or Dying Battery. The most common reason for a flashing light on your vape pen is to indicate that your battery is running low. When there is not enough power coming from the battery, your vape will give a blinking light (a red light with some devices) to let you know it needs to be charged.
Why is my vape not connecting?
In some cases, the only issue is that your vape needs a quick clean and re-assembling. If any liquid has gotten on the connectors, or any of the threading is skew, it might be stopping your device from making a proper connection.
What happens if your 510 pin is stuck?
If the 510 pin has dropped or become stuck in the ‘On’ position, your vape won’t fire and will most likely give you a flashing light. If the staff at your local vape shop don’t do repairs, it might be time for a new mod.
What happens if you screw a battery mod on too tight?
If your tank has been screwed on too tightly or not tightly enough, it won’t make a connection and will give you a warning, usually in the form of a flashing light.
What happens if you drop a vape?
If at any point your vape has been dropped, the impact may have dislodged some of the smaller components inside your device . The more common of these is the connection between the battery mod and the tank: the 510 pin.
How to know if vape is full?
To see if this is the case, charge your vape until the light stays on (or stays green), indicating a full battery.
Why is my fire button stuck?
Unfortunately, like most electronics, vape devices do have some weaker components, mainly, the firing button. Because of general wear and tear or because some liquid leaked underneath, your fire button may become stuck.
Why does my vape tank leak?
Leaking happens when e-juice escapes from your tank, usually through the airflow system. Depending on the reason behind it, leaking can range from a few drops of e-liquid, to having your tank emptying all of its contents all over your vape mod. It’s a common problem with even the most popular sub ohm tanks.
How to keep vapes from leaking?
Try to keep your vape positioned vertically if you’re not using it for extended periods of time. Don’t get into the habit of laying your device down all the time, or you will have to deal with inevitable leakage.
How to stop vaping from flooding?
Reduce your airflow – Inhaling too forcefully when you vape encourages flooding by literally pulling more e-juice into the chamber. This is easy to solve: inhale more softly, letting the coil and wicking do the work for you. If you’re still having issues, try reducing your airflow setting. However, if you reduce the airflow, be careful not to inhale too strongly to compensate—this could just make the issue worse.
Why do multistrand coils pop?
Avoid exotic coils – This applies mainly to rebuildables. Multi-strand coils often pop and spit due to their design. Twisted coils in particular have a bad reputation for this, but Clapton coils may have the same issue. Their design makes it easier for e-liquid to pool on the coil, and so sometimes it’s hard to entirely avoid popping on these coil types. The easiest advice if you absolutely want to avoid spitback is using simple round wire instead.
What happens if you inhale too much liquid?
If you inhale too forcefully, you risk bringing too much e-liquid into the coil, which may lead to leakage. Watch out when filling – Never overfill your tank. Always leave a small air pocket at the top when filling. This empty space will help prevent any liquid from leaking out.
How to remove e juice from a tank?
First make sure the threads are in sync and closed tightly, but not too tight. Find that sweet spot. If the threads are crossed, screw it back together carefully. Remove e-juice from chimney – All tanks have a central airflow tube that runs from the body of the tank up to the drip tip, known as the chimney.
Why does my e-liquid spit?
Spitback has a simple cause: e-liquid gets pooled up on the coil itself and gets “cooked” instead of being vaporized. It spits similar to the way boiling water does, and with you inhaling from the tip, you can easily catch a droplet or two. The problem is closely linked to flooded coils, but, in some cases, it can happen even without flooding. Here are some ways to prevent spitting and popping from occurring.
Ahmed Mansour Full Member
Hi, got a brand new vision spinner 2 and I am trying to charge it. Although the charger indicator lights red, the battery keeps flashing white and blue. Is this normal?
Katmar Vaping Master ECF Veteran
Or, it could possibly be a lousy battery. You'll have to see when you use it. Most vendors with replace without question. Good luck.
stylemaster2001 Senior Member ECF Veteran
I think, only think, they are on a red, white and blue light system. If it's flashing red, it is really low, as it charges, it will change to white, and finally blue. It may turn off once completely charged! I have one that does this also. Just indicates the status of the battery. No worries....hope this helps!!
Spooky28 Super Member Verified Member ECF Veteran
I thought it was orange, blue and white (white being fully charged). I have to fiddle a lot to get mine to white if it ever goes white but I've had mine do the same thing and I'm pretty sure mine is a bum battery (and a fake at that).
GinnyTx Ultra Member Verified Member ECF Veteran
I've had two (no make that 3 if you count one of Ed's) Vision spinners go bad after the first charge lately.
Kryp2nite26 Senior Member Verified Member ECF Veteran
I have a genuine Vision Spinner 2 and it does not flash the entire time it is charging. It only flashes briefly when connecting to the charger. Just out of curiosity, what color is your voltage adjustment knob? Is is chrome or more of a pewter color? There are a lot of fake Spinner 2's out there.
rspaff Full Member
I have two spinner II authentic that the light indicator changes as it charges. It goes from orange to blue to white as the battery charges. My clone that I bought from a store on eBay does whatever it wants. The eBay money back guarantee worked with it. My money was refunded and they didn't' want the POS back.
