The pen will turn off once the battery capacity reaches about 3.3V. This automatic shutdown is called low voltage protection. A loose battery connection may also cause your vape pen’s light to blink, and the device will automatically shut down.
Full Answer
How to vape with a vision spinner?
Begin Vaping. Hold up the mouthpiece of your atomizer to your mouth and hold down on the power button on the Vision Spinner 2. From this point on, you should be able to pull from your Spinner and everything should come naturally.
What is spinner 3s vape pen battery?
Compatible with 510 threaded attachments, Spinner 3S lets you power up your favorite tanks with long-lasting battery life. Spinner 3 VV vape pen batteries allow you to regulate the power between 3.6 and 4.8 Volts if you like to control your vapor clouds.
Why spinner 3 atomizer?
The ingenious Spinner 3 atomizer enables Spinner 3 to achieve a one-stop customer integration on the basis of its original strength. 1. From raw materials to finished products, every process is tested and controlled professionally and strictly by our professional machines and personnel. 2. Our products are approved CE, RoHS certificate. 3.
Why won’t my vape pen vape?
The problem could also be due to residue building up on the heating coil in which case you may need to clean it. You can do this by dubbing it with a cotton bud dipped in isopropyl alcohol, and you’re good to go. Even with the battery fully charged, your vape pen may still fail to produce vapor.
What is the Vision Spinner 3?
Crafted from zinc-alloy, the chassis of the Vision Spinner 3 is lightweight and portable, making it easy to bring around in a purse or pocket. Outfitted with a single firing button. The Vision Spinner also possesses a preheating button to help vaporize thicker blends of eJuice.
Is the Vision Spinner 3 a good vape pen?
Overall, the Vision Spinner 3 is a decent, slightly more-versatile vape pen for those fearful of more-complex mods. It’s not my preferred way to vape, but if you have better things to do than tinker with wattage curves and preheat settings, the Spinner 3 might be right up your alley.
How to preheat a vape?
Preheating function First press the vape button 5 times to start the battery quickly, then press the preheat button for 3 seconds. When the preheating function is activated, the power button light will turn on. Set the preheating time to 10 seconds, and the light will be off after the preheating.
How to use Vision Spinner 3 1600mAh?
vision spinner 3 1600mah instructions: 1. After removing the atomizer, take the battery part, you need to put it in a dry and cool place, take it lightly. Do not drop, knock, beat, enter the oil, enter the water. If.
How long does it take to smoke a cigar?
Smoking: Press the button to smoke. The maximum time for a single puff is 8 seconds. The white light flashes 8 times. You need to press the button again to return to the smoking mode.
Vision Spinner 3 Battery
The strongest version in the spinner version. -Spinner 1 Simple and practical quality -Spinner 2 Simple and practical quality, increased endurance -Spinner 3 Simple and practical quality. 1600mah ( power ) /1000mah (smart in size ). Updated the more stable V chip.
Vision Spinner 3 Battery
The strongest version in the spinner version. -Spinner 1 Simple and practical quality -Spinner 2 Simple and practical quality, increased endurance -Spinner 3 Simple and practical quality. 1600mah ( power ) /1000mah (smart in size ). Updated the more stable V chip.
Our Service
1. From raw materials to finished products, every process is tested and controlled professionally and strictly by our professional machines and personnel. 2. Our products are approved CE, RoHS certificate. 3. Except for the Standard components, if you have special request for the components, we will customize it for you.
Vision Spinner 3 Battery
Discover the Vision Spinner 3 Battery, featuring a bottom voltage adjustment dial, 4 voltage output levels, and is equipped with a nifty preheating function for thicker blends of eJuice.
Ratings & Reviews
Review's title & body can't be empty Question's body can't be empty Please enter a star rating for this review Name field cannot be empty Invalid email Your review has already been submitted. Max length was exceeded Please fill out all of the mandatory (*) fields One or more of your answers does not meet the required criteria
How many times do you have to press the button to turn on a vape pen?
You usually have to click the button five times to turn on the battery. When taking a hit, ensure you hold the button down, otherwise you won’t be able to draw.
Why is my vape pen not producing vapor?
The most likely reason for this is that the firing pin doesn’t have proper contact with the battery, which can happen when the cartridge is screwed in too tight.
How to stop a vape pen from scratching?
The first problem is pretty straight forward, and the solution is to always make sure your vape pen has enough juice in it to avoid that scratchy feeling in your throat. Alternatively, you can check the way you’re drawing and reduce the number of puffs you take in succession. Sipping on some water can also relieve these symptoms.
How to check if a vape pen is working?
To avoid this, just ensure that the heating coil is pulled out to the point where it’s flush with the bottom of the cartridge, which you can do by using the tip of a pocket knife, a razor blade, or paper clip. Thereafter connect it to a charged battery to check if it’s “pulling” properly. Check out this video showing how to pull out the firing pin with the aid of a paper clip. Using this simple method your vape pen should be working A-Okay. A word of caution- please be careful not to cut yourself while doing this.
Why does my vape pen taste burnt?
If your vape pen produces an unpleasant burnt taste the reason could be either your vape pen’s temperature control is set too high, or the heating coil has residue on it . If your battery’s temperature is adjustable (a feature found in rechargeable vape pens), you can adjust it to a lower setting using its multi-click functions. Start by rapidly pressing button 5 times to turn it on, then press the button rapidly 3 times to alternate between low, medium and high temperatures. If it’s a problem with dirty heating coil, clean it with a cotton bud.
Why does my vape pen leak?
Leaving your vape pen in the car during hot weather can also cause the cartridge to leak. That’s because the cartridge seals expand and creating a passage for vape juice to leak out. Drawing too frequently on your vape pen, known as chain vaping, can also weaken the cartridge seals, causing vape juice to leak out.
Why does my battery light purple?
Battery flashes a purple light 3x when you connect a cartridge. This is to prevent a short circuit that occurs from the cartridge being screwed on too tightly. Try cleaning the electrodes on both the battery & cartridge. If this doesn’t work slowly unscrew the cartridge to see when then button turns solid.
How to turn off battery on a vape?
Here are the steps: 1. Press the button rapidly 5 times. 2. Notice the light on the button flashing. 3. The battery is now activated, you can push and hold the button as you're inhale your vape. 4. Rapidly click the button 5 times to turn the battery off.
How to inhale a vaporizer?
How to inhale for the first time? 1 Disassemble Your Tank ＆ Fill Dropper With e-liquid 2 Fill tank but avoid the middle hole 3 Disperse e-liquid along the inside of the tank 4 Screw airflow base back onto tank with the battery end down 5 Please wait 5 minutes for the e-liquid to soak into the coil completely.
What is a vape pen?
Vape pens contain a battery, an atomizer, a cartridge or tank, a sensor and a mouthpiece. VM STICK 18 from Vaporesso .When the user sucks on the mouthpiece, the battery sends a charge to the sensor which causes the temperature in the atomizer to rise.
What is it called when you test your vape pen?
Most vapers test run their pens without any juice or vaping material for the first time. This is known as priming.
How many clicks to change heat setting?
Three clicks to change the heat setting.
How long does it take for eliquid to soak in a coil?
Please wait 5 minutes for the e-liquid to soak into the coil completely.
Do vape pens have the same parts?
Before asking questions, it’s necessary to know the components of a vape pen. In fact, most vape pens have the same parts, though some will differ slightly.
Why is my vape not connecting?
In some cases, the only issue is that your vape needs a quick clean and re-assembling. If any liquid has gotten on the connectors, or any of the threading is skew, it might be stopping your device from making a proper connection.
How many times do you press the fire button on a vape?
To test if this may be the issue with your vape, press the fire button three times in quick succession, then give it another go. Some vapes require you to press it five times to unlock it.
Why does my vape pen blink?
8 Reasons Why Vape Pens Blink. 1. Low or Dying Battery. The most common reason for a flashing light on your vape pen is to indicate that your battery is running low. When there is not enough power coming from the battery, your vape will give a blinking light (a red light with some devices) to let you know it needs to be charged.
What happens if your 510 pin is stuck?
If the 510 pin has dropped or become stuck in the ‘On’ position, your vape won’t fire and will most likely give you a flashing light. If the staff at your local vape shop don’t do repairs, it might be time for a new mod.
What happens if you screw a battery mod on too tight?
If your tank has been screwed on too tightly or not tightly enough, it won’t make a connection and will give you a warning, usually in the form of a flashing light.
What happens if you drop a vape?
If at any point your vape has been dropped, the impact may have dislodged some of the smaller components inside your device . The more common of these is the connection between the battery mod and the tank: the 510 pin.
How to know if vape is full?
To see if this is the case, charge your vape until the light stays on (or stays green), indicating a full battery.
How to unlock Vision Spinner 2 battery?
To lock or unlock the Vision Spinner 2 battery, press the button 5 times within 1.5 seconds. The LED light will flash to confirm each action. When the battery is in lock mode, the power button is disabled. Charging time – Spinner II, for its large capacity of 1600mA, requires about 5-6 hours to be fully recharged if the the battery has no power at all. Spinner II, no different to regular eGo batteries, requires a standard USB charger of 420mA output and a wall adapter of 500mA output.
How to turn on a vision spinner?
How To Turn On The Vision Spinner. As with most batteries in the vaporizer world, the Vision Spinner is turned on and off by pressing the power button 5 times consecutively and rapidly. If done correctly, the power button should blink its lights a few times. This method allows for the Battery to output a higher temperature ...
What is a vision spinner 2?
What is the Vision Spinner 2? The Vision Spinner 2 is a variable voltage battery, that is adjusted by spinning the base at the bottom of the battery. Threading Connection – This part is found at the top of the battery, it’s the threading that will connect to the threading of the Atomizer.
How long does it take for a vision spinner to charge?
Like other e-cigarette batteries, you should always give your Vision Spinner an initial charge of at least 4 hours, even if it appears fully charged or is already holding some charge. This conditions the battery and ensures a longer battery life overall. Once the battery is conditioned, you will typically need to charge a low battery for three to four hours.
Where is the power button on Vision Spinner 2?
Power Button – Found on the face of the Vision Spinner 2, it’s used to turn the Spinner on and off. Variable Voltage Ring – This part is at the very bottom of the Spinner 2, using the values written around the Spinner, you can set your Voltage to any of the options available by turning this ring.
Does the 510 thread work on a 510 battery?
Hey Jill, yes it has 510 threading and allows this battery to be compatible with most other 510 threaded attachments.