Full Answer
Why is my vape not working?
This means that you need to unlock your vape by pushing the button 5 times quickly to unlock. Once it is unlocked, it will blink to confirm it is unlocked and will work. The other simple issue is that it is not charged. Simply plug the unit into a charging area using a micro USB cord.
Why is my vape juice coming out of the tank?
Beyond that you could be flooding the coil from overpriming it and if it's excessively flooded trying to vape the juice will just result in heating it and causing the juice to exit via bottom airflow. You could also flood the tank by using high PG e-juice in a sub ohm coil, and pulling too hard at low wattage with closed airflow.
Why does my vape spit back when I vape?
Wait a minute or so and then vape as usual. Other possible reasons for spit back may include the following: using high PG e-juice in conjunction with a sub ohm coil, chain vaping from a tank which gets fairly hot as the heat thins your ejuice, a coil which is wicking the cotton too quickly.
Why is my vape gurgling?
One of the simplest reasons for gurgling or spit back is a beginner attempting to vape 70VG or higher e-juice with a high resistance coil intended for mouth to lung. The e-juice in that instance is too thick for your low wattage device and coil, therefore the e-juice doesn't heat sufficiently to turn into vapor.
Why does my vape keep turning itself off?
Weak battery. Your battery may simply just be running out of power. Try switching to a fully charged battery and see if it makes a difference. If you are using a variable wattage device, try turning up the power.
Why is my geek vape not working?
Geek Vape Aegis Solo Not Working If nothing happens when you attempt to use the Geek Vape Aegis Solo, it's likely that the battery is dead or that the device is locked. To unlock the device, press the fire button five times quickly. If the device still doesn't work, try charging the battery.
How do you reset the geek vape puffs?
Change Mode: 3 clicks of the fire button then using up down buttons to scroll. Once in Output adjustment mode, you can scroll down to adjust coil resistance and reset puff count by pressing the fire button.
How long do geek vape batteries last?
Geekvape estimates the fully-charged battery will last two days. We found that it lasted a bit less with heavy use at 55 watts – a still respectable one day. Geekvape also states that the Obelisk 120 FC has an incredibly long battery life with one million puffs at 60W.
Why is my geek vape flashing red?
If the red light flashes 3 times, it means that there is no atomizer connected, please change another pod or replace the coil and try again. 2. If the red light flashes 5 times, it means the battery is too low, please charge the battery full and try again.
How many hits is a geek bar?
Powered by 500mAh high voltage battery, the GEEK BAR Disposable Pod Kit can provide about 575 puffs. With constant output and consistent taste system and 5% nicotine salt, the GEEK BAR Disposable Pod Kit will bring you real and smooth taste, massive Clouds and solid throat hit.
How do you clean a geek vape?
In that case, you can follow these steps for deeper cleaning.Remove wicks from coils.Dry burn your coils lightly (don't let them glow too much)Remove atomizer from your mod.Place under running water.Brush them lightly with a toothbrush or a coil cleaning tool.Rinse once again.More items...
How do you unlock Geekvape mod?
Geek Vape Aegis Hero Not Hitting If your Geek Vape Aegis Hero isn't hitting when you hold the fire button, you should first check to confirm that you haven't locked the device. Press the fire button five times to unlock it.
How do I reset my Geekvape Aegis boost?
Hold down the UP and DOWN button together to lock the settings. Hold DOWN & Fire buttons to reset puff counter. Three Clicks of the FIRE button locks the mod from firing.
Are geek vapes good?
Geekvape, together with Voopoo, Vaporesso, SMOK, LOSTVAPE & UWELL, was rated as the 6 Best Vape Brands 2022. The Aegis series has earned excellent reputation around the world out of its outstanding performance with waterproof, shockproof & dustproof.
How do I know if my vape battery is bad?
Here's a list of symptoms that all point to a bad vape battery:Your vape depletes much faster than usual. ... You can feel the battery heating up as it's charging or discharging.You're using the same vape battery for more than a year.When you charge the batteries, they reach the maximum capacity faster than usual.More items...•
Is GeekVape any good?
Overall, Geekvape did a good job with the 1FC. It's nothing new or groundbreaking and doesn't really stand out outside of the fast charging, but it's a solid overall device to help new vapers and people looking to quit smoking. They made it simple, but the battery is a bit small compared to the Geekvape One.
How do I unlock my GeekVape?
If your Geek Vape Aegis Hero isn't hitting when you hold the fire button, you should first check to confirm that you haven't locked the device. Press the fire button five times to unlock it. If the Aegis Hero still isn't hitting, the screen should display an error message telling you what the problem is.
How do you unlock GeekVape Z?
Geekvape Aegis Legend 2 Externals Rather than pressing the fire button 3 times or having to do some weird button sequence, all you need to do to lock all the buttons is push the small slider up to lock and down to unlock.
How do I change the coil on my geek vape?
1:235:30How to replace a geekvape cerberus coil. - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd you grab the bottom of the tank. And the top of the tank. And you just twist counterclockwise.MoreAnd you grab the bottom of the tank. And the top of the tank. And you just twist counterclockwise. The whole tank should come apart. So you pull the top off and then you can grab your glass.
How do you unlock Aegis boost pro?
GeekVape AEGIS Boost PRO Button Operation: Press the Fire-button and “ +/-” at the same time to adjust the screen brightness. Press the UP and DOWN for about 2 seconds to lock/unlock the device. When the device is locked, press the fire button for 3 times Lock/Unlock firing.
Why does my vape spit back?
Other possible reasons for spit back may include the following: using high PG e-juice in conjunction with a sub ohm coil, chain vaping from a tank which gets fairly hot as the heat thins your ejuice, a coil which is wicking the cotton too quickly.
Why is my e juice not turning into vapor?
The e-juice in that instance is too thick for your low wattage device and coil, therefore the e-juice doesn't heat sufficiently to turn into vapor. The more common reason is that you've flooded the coil when priming, excess juice in the coil which can't vaporize quickly enough results in gurgling and/or spit back.
What does it mean when the fire button on a atomizer doesn't work?
If you press the fire button but the device does not fire, 1.If the red light flashes 3 times, it means that there is no atomizer connected, please change another pod or replace the coil and try again. 2.If the red light flashes 5 times, it means the battery is too low, please charge the battery full and try again.
Why does my coil taste burnt?
Given that we know that burnt coils can produce harmful chemicals , you should probably still change it. Occasionally, you’ll also get a burnt taste when you have just replaced a burnt out coil.
How to fix a sub ohm tank leak?
Here are some tips to avoid leaking: 1.Please close the airflow holes when you refill the tank, and do not saturate the coil directly with juice dropping to the inner coil, you just need to fill the tank and wait around 10mins.
How does vaping work?
Vaping devices use the power of your inhale to pull e-liquid to the heating coils and mix with the vapour. If you pull very long and hard on the device it is possible for some e-liquid to be pulled into the airflow chambers. For all types of vaping, slow long drags are recommended.
How long does it take for a Geekvape Aegis Max to charge?
When the device is charging it will indicate with a light. When the charge is complete, the light will shut off. This charging process typically takes 60-120 minutes. If your Geekvape Aegis Max is leaking there are a few things that should be looked at in order to stop the leaking.
Can you leave vapes in a car before flying?
It is best to empty all vaping devices before flying on a plane. G) Over Heating: If you leave any vape in a vehicle in the summer, especially in direct sunlight, it could leak. Over heating the device can cause the e-liquid to expand, pushing it out through the o-rings or through the airflow holes.
Kcoc Full Member
I have had my sigelei 20w going on the 2nd day now. On more than a couple of occasions I will press the fire button to have a vape and the device will completely shut off and will not come back on until I take the battery out and turn it back on. It has happened while using a sony vtc4 and an efest battery, both are 18650.
realsis Ultra Member Verified Member ECF Veteran
My guess would be that you are experiencing a short likely in your atomizer coil. I would check it carefully or rebuild a new one. Make sure everything is as it should be with the coil and atomizer. Once you fix it that should do the trick. It is a safety feature.
Kcoc Full Member
It is doing with two different coils. One at 1.1 the other at 1.4 ohms. It has happened with both the batteries mentioned above both batteries had a charge around 4volts. It usually happens when I get around the 18w range which is where I found my kayfun performs amazingly with the 1.4 coil.
Kcoc Full Member
The same batteries are working perfectly in my svd but no I don't know anyone else who uses them. I am the only one of all my friends who vape the rest still smoke regular cigs. And the closest b&m is about an 1-1.5 hour drive.
Recycled Roadkill Ultra Member ECF Veteran
I've had this happen, sometimes frequently with my Vamo 5, SVD, and 134. It's never occurred with my MVP 2, or Coolfire II.
Why does my battery sound like it bounced?
Totally in agreement with you...If it only happens when it is put down on a hard surface then it sounds as if a battery bounce due to a springy contact.
Can liquid sit on battery contacts?
That makes more sense for sure. Some liquid can sit on battery contacts and be pretty much invisible. Can even be a color similar to the contacts. I was thinking more of dried accumulated gunk.