The most common reason for a flashing vape pen light is to indicate the battery life is about to end. When there is not enough power coming from the vape pen battery, your vape will give a blinking light (a red light usually) to let you know you need to charge it.
How to use Joyetech ego AIO vape?
To vape, turn the device on by pressing the fire button 5 times in quick succession, then hold the button while inhaling on the mouthpiece. The button light on the kit will flash 5 times to indicate that it is on. The AIO is turned off in the same way. 4. Replacing the coil Your Joyetech eGo AIO Kit comes with 2 coils.
What is the run time protection of my ego AIO?
eGo AIO has a 15 second run time protection. The light will flash 10 times if the button is pressed for more than 15 second. Low voltage protection: When the battery voltage drops lower than 3.3V, the button light flashes for 40 times and the device will power-off. Charge the device to power device back on.
How do I use my AIO vape?
Using the device To vape, turn the device on by pressing the fire button 5 times in quick succession, then hold the button while inhaling on the mouthpiece. The button light on the kit will flash 5 times to indicate that it is on. The AIO is turned off in the same way.
Why does my AIO Flash but not hit?
My AIO flashes but doesn't hit for two reasons one being the battery is too low to fire the coil or it's low in power. I would try to recharge it until the light goes out and see if it did get a good charge beyond the ability to turn on your light. If that doesn't work try another coil.
Why is my eGo AIO not working?
If your Joyetech AIO battery is not charging, firstly try plugging it into a different USB port or wall socket. If this doesn't work, try a different charger, but make sure you are using a Joyetech AIO USB cable. If you have a spare kit, try charging the spare to rule out a faulty charger.
How long does an eGo AIO last?
Your Joyetech eGo AIO battery's life will vary depending on usage. The AIO has a 1500mAh battery, which is above average capacity for a pen-style kit. A light vaper should find that their battery will last around a day or more; heavier vapers may need to recharge more often than this.
How do I clean my joyetech eGo AIO?
0:454:00How To Clean Your Joyetech AIO [Tutorial] - YouTubeYouTubeStart of suggested clipEnd of suggested clipPress down open up Bo I like this cuz it's simple you wanna get rid of the juice in there dump itMorePress down open up Bo I like this cuz it's simple you wanna get rid of the juice in there dump it out alright just playing this level just turn it upside down dump it. Out. Once you do that.
How do I prime my eGo AIO coil?
0:041:26How To Prime And Fill Joyetech eGo AIO Vape Kit | Vaporleaf - YouTubeYouTubeStart of suggested clipEnd of suggested clipAlright with your coil unscrewed you're going to want to apply juice to the cotton down in that tinyMoreAlright with your coil unscrewed you're going to want to apply juice to the cotton down in that tiny. Center hole. Apply enough juice wait for it to saturate.
Why does my eGo AIO keeps blinking?
If you go to use the vape pen and the LED light is blinking while you are holding down the button, that is signaling one of two things - either your battery is dead OR it is not recognizing your atomizer. If you know that your device is definitely charged, check your coil.
How long does Joyetech AIO take to charge?
about 30-40 minsIt takes about 30-40 mins to charge the eRoll batter via the dedicated PCC, and please allow the battery enough time to fully charge.
How long does a joyetech coil last?
On average, an atomizer will last for a few weeks to a couple months. If a person is a heavy vapor, the life cycle will be shorter. For light vapors, it may last longer. With proper care any atomizer can last a long time.
How do I open joyetech ego AIO?
0:282:48Joyetech eGo AIO - Three Minute How To - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis is your ego IO. And when the battery is built into the bottom. And the tank is avatar to accessMoreThis is your ego IO. And when the battery is built into the bottom. And the tank is avatar to access the tank and will push down on the top and twist anti-clockwise.
How do I know when my coil needs changing?
However, there are several signs which indicate that it's time to replace your coils.Burnt Taste. The first and most prominent way to tell your coil needs changing is by experiencing an unpleasant burning taste in your vape.Bubbling Noise. ... Weak Flavour. ... Little Vapour. ... Leaking Device.
How long should you prime a coil?
around 5-10 minutesHow Long Should You Prime a Vape Coil For? It's always recommended to leave your coil to prime for as long as possible - anywhere between 5-30 minutes. The longer you leave it the better, but most coils should be ready to vape after around 5-10 minutes.
How do I charge my eGo AIO?
Simply charge eGo AIO by connecting it with a computer or a wall adapter (output: DC 5V) via USB cable. When it's fully charged, the button light will go out. eGo AIO presents you two forms of package: Standard kit and Easy package.
How do you prime a new coil?
0:451:52Priming a vape coil in 2 minutes - YouTubeYouTubeStart of suggested clipEnd of suggested clipGet your either quid. And add a drop onto each of the liquid inlet holes add a few drops onto theMoreGet your either quid. And add a drop onto each of the liquid inlet holes add a few drops onto the wicking material down the middle hole put your vape coil in your tank fill your tank with the liquid.
How to change coils on Joyetech Ego?
To replace your coil, press down on the cap and twist to unscrew it. The top cap is connected to the coil; simply unscrew the old one and attach a new coil. We recommend changing your coil every 1-3 weeks, depending on usage. If your kit starts producing lower quality or less vapour than before, or the flavour begins to deteriorate, you'll know it's time to change your coil. Replacement coils are sold here; the coils supplied with the kit are 1.5ohm, though you can also buy sub-ohm coils for the AIO, which are designed for use with higher-VG liquids.
How to turn on a vape?
To vape, turn the device on by pressing the fire button 5 times in quick succession, then hold the button while inhaling on the mouthpiece. The button light on the kit will flash 5 times to indicate that it is on. The AIO is turned off in the same way.
What to do if Joyetech AIO battery is dead?
It won't charge/the battery is dead. If your Joyetech AIO battery is not charging, firstly try plugging it into a different USB port or wall socket. If this doesn't work, try a different charger, but make sure you are using a Joyetech AIO USB cable. If you have a spare kit, try charging the spare to rule out a faulty charger.
How to use Joyetech AIO?
Before using your Joyetech AIO for the first time, make sure the battery is fully charged. Connect your AIO Kit to a computer using the USB charging cable included in the pack; you'll know when it's charged as the button light will go out. 2.
How to fill a e-liquid tank?
To fill your tank, press down on the cap and twist to unscrew the top cap. Drip your e-liquid directly into the tank, making sure not to fill above the max fill line (2ml). If you fill your tank above this line, you'll find that the tank overflows when you try to replace the top cap and coil.
How long does it take for a vape to sit?
This happens when you attempt to vape when the tank is empty, or when you don't realise the e-liquid level has run low, or if the coil hasn't been primed (after refilling, drip a couple of drops of e-liquid into the coil, then allow the tank to sit for 10-15 minutes once the coil is in place).
How to adjust airflow on a cigarette?
Twist the ring on the top cap to adjust the airflow. Depending on your preference, you can opt for a more open draw (airflow more open) or a more restricted, cigarette-style draw (airflow more closed). The airflow is at its most open when the two dots on the cap line up; any movement left or right will give you a tighter draw.
Why is my vape not connecting?
In some cases, the only issue is that your vape needs a quick clean and re-assembling. If any liquid has gotten on the connectors, or any of the threading is skew, it might be stopping your device from making a proper connection.
What happens if you drop a vape?
If at any point your vape has been dropped, the impact may have dislodged some of the smaller components inside your device . The more common of these is the connection between the battery mod and the tank: the 510 pin.
Why does my vape pen blink?
8 Reasons Why Vape Pens Blink. 1. Low or Dying Battery. The most common reason for a flashing light on your vape pen is to indicate that your battery is running low. When there is not enough power coming from the battery, your vape will give a blinking light (a red light with some devices) to let you know it needs to be charged.
What happens if your 510 pin is stuck?
If the 510 pin has dropped or become stuck in the ‘On’ position, your vape won’t fire and will most likely give you a flashing light. If the staff at your local vape shop don’t do repairs, it might be time for a new mod.
Why do you have to lock the fire button on a vape?
Some devices on the market allow you to lock the fire button to prevent your vape from accidentally firing while it’s in your pocket or bag.
What happens if you screw a battery mod on too tight?
If your tank has been screwed on too tightly or not tightly enough, it won’t make a connection and will give you a warning, usually in the form of a flashing light.
Why is my fire button stuck?
Unfortunately, like most electronics, vape devices do have some weaker components, mainly, the firing button. Because of general wear and tear or because some liquid leaked underneath, your fire button may become stuck.
Why does my AIO light stay on?
I have an AIO and the light staying on for a few seconds after each use is normal, it's just telling you the battery level, when it blinks it's getting low. If it's blinking 5 times instead of firing that usually means there's a short, you may need to check your coil to make sure it's screwed in correctly.
How to fix a gurgling vape?
If that doesn't work you could try taking out the coil, removing the metal baffle, rolling up the end of a paper towel and swirl it around inside to try to soak up excess liquid. I'd call that plan B though because I don't know how hard it is on that coil to get the baffle back in there.
Why does my eliquid tank blink?
The blinking light means the coil isn't making contact at the bottom of the tank. If you over-tightened the coil when you screwed it into the top cap, it may be too short to reach, try loosing it a bit and see if it begins working. On the flooding, when the top cap is screwed on after refilling the tank, the air pressure inside of the tank forces e-liquid into the coil and floods the heck out of it.
How long does a syringe light last?
It will light when you pull from it then it flashes a steady light for about 5 sec. when fully charged.
Why is my AIO flashing but doesn't hit?
My AIO flashes but doesn't hit for two reasons one being the battery is too low to fire the coil or it's low in power. I would try to recharge it until the light goes out and see if it did get a good charge beyond the ability to turn on your light. If that doesn't work try another coil.
Why is my center pin stuck?
It could be that your center pin got pushed down when you were cleaning it . Try pulling it back up a bit. Even the center pins with the spring can get stuck.
How to reset a mod?
According to a couple of threads I saw elsewhere this is not a vent hole as one might expect, but is actually the access are to conduct a hard reset on the mod. Use a pen or paperclip to gently check the inside for a tiny button ( similar to the reset button on many wifi routers or other electronic devices). Press the button for a few seconds and this should perform a hard reset on the control board inside the mod. That might fix the issue you are experiencing.