Three Reasons Why Your Coils Burn Out
- Chain vaping - Taking multiple draws over a few seconds will dry out the wick faster than it can soak up e-juice.
- Breaking in coils - New coils that are heated too high can pop or break.
- E-liquid selection - E-juice high in sugar caramelizes the coil leading to a gunk buildup
Full Answer
Why does my vape coil burn when I press the button?
A coil gets burnt when e-liquid inside the tank fails to properly saturate the wicking material. Because there's no juice surrounding the cotton fibers, they partially get combusted as soon you press the button.
Why do my coils burn out so quickly?
Dozens of people contacted us with similar issues so let's see what the problem is and how to prevent burning out coils prematurely. A coil gets burnt when e-liquid inside the tank fails to properly saturate the wicking material. Because there's no juice surrounding the cotton fibers, they partially get combusted as soon you press the button.
Why does my vape taste burnt when I puff?
This wick surrounds the element, which usually heats up when current passes through it, causing the e-liquid to evaporate. Once evaporation occurs, the vaper can inhale the smoke the vape produces. However, if you didn’t properly prime the wick before taking your first puff, you’ll experience a burnt taste even with a new coil.
Can vape juices damage your coils?
Although this mostly happens with sweeteners, vape juices that are dessert or coffee-inspired are also likely to cause more harm to your coils compared to the plainer ones. To prevent burning, clean up the gunk-filled wick properly with water or grain rubbing alcohol and leave it to dry for 24 hours or longer before you reuse it.
Why are my coils burning out so quick?
You're Not Priming New Coils When You Install Them Coil gunk is the most common reason why vape coils burn out, and that's a good thing because it's completely fixable through cleaning – there's no real damage to the coil.
How long should a coil last in a vape?
between one to two weeksA new coil should last between one to two weeks. However, most e-liquids leave a thin layer of residue when they are vaporized. This builds up around your coils and wicks and can end up clogging your device in the long run.
What causes a vape coil to burn out?
Using High-VG e-liquid in a device with a 50-50 coil with tiny wicking ports, will struggle to absorb the e-liquid properly. If the user vapes very regularly, the coil will quickly dry out in patches, or completely. When this occurs, it will often burn out.
Why is my coil burnt after 2 days?
That burnt taste can occur if there's not enough e-liquid on the wick inside your atomizer coil. The wick is the part of your device that soaks up the e-liquid, which is then turned into vapour when the coil heats up.
How many puffs Should a coil last?
On average, a decently constructed coil for a sub-ohm tank should last you 4 days to 1 week. If you vape less because you cannot vape during work hours, or you do not vape throughout the day, then your coils are likely to last twice as long.
Why is my vape coil not lasting long?
Simply remove the coil, rinse it under warm running water to remove as much e-liquid residue as possible. If your coils still seem a little blocked up, soak your coils overnight in vodka, vinegar or plain, old-fashioned warm water to break up any residue that remains.
Why is my coil burning after 1 day?
Sub-ohm coils heat up much quicker than those with a higher resistance. If your e-liquid has a thinner consistency then the atomizer head can vaporize it too quickly, causing premature burning.
Does low wattage burn coils faster?
Use a Lower Wattage Setting When you vape at a high wattage, the liquid absorbed by the coil's wick could be burning off faster than the wick material can absorb more ejuice.
How long should I wait between vape hits?
15 to 30 secondsDon't Chain Vape You must let your wicks saturate to reduce the possibility of a dry hit. The general rule is to wait 15 to 30 seconds before puffing again. For people who are trying to quit smoking, 30 seconds can be a long wait. In this case, you can buy e-juice with a higher nicotine level.
How do I stop my coil from burning?
The best ways to stop your coil from burning are:Prime your coils.Stop chain vaping.Reduce power settings.Keep your vape tank topped up.Use a vape juice with more PG.Try a vape juice with less sweetener.Use temperature control.Use smart mode.More items...
Which vape coils last the longest?
See the longest lasting coils of 2019.Freemax Mesh Pro Coils. The Freemax Mesh Pro is a fantastic, sought after coil with a very respectable life span of around 2 – 3 weeks. ... Uwell Valyrian Coils. ... HorizonTech Falcon M2 Coils. ... Smok TFV8 Baby V2 A3 Coils. ... Aspire Odan Coil 0.2 Mesh.
How long should I let a new coil soak?
It's always recommended to leave your coil to prime for as long as possible - anywhere between 5-30 minutes. The longer you leave it the better, but most coils should be ready to vape after around 5-10 minutes.
Why does my vape coil burn out?
6 Common Reasons Why Vape Coils Burn Out – and How to Avoid It! 1. Not Enough Vape Juice in the Tank. Whenever your wick is dry, it will not function properly. As mentioned, the wick needs to be saturated in vape juice. In case you vape frequently, then your tank will start to run empty and the wick will not soak up as much ...
How to avoid burnt coils in vape?
To avoid the burnt coil, keep checking your tank and top it up when it is at a third of its capacity. 2. Chain Vaping.
How to extend coil life?
To extend your coil life, keep your vape tank topped off. On many coil heads, you should fill the tank once it reaches about two-thirds empty or the wicks can’t become completely soaked with e juice.
What happens if you use a coil that isn't high grade?
If you do so with a coil that isn’t high-grade, the wick won’t be able to handle the heat these wattages will generate and will end up burning. The solution to this is to simply reduce your power setting and find out the ideal wattage you should vape at.
What happens when you fill a vape tank with e-liquid?
Whenever you fill one of your vape tanks with e-liquid, the wicking material in the coil’s head absorbs the juice. This wick surrounds the element, which usually heats up when current passes through it, causing the e-liquid to evaporate.
What happens when you vape multiple puffs?
This causes the wick to burn.
How to stop vaping from burning?
To prevent burning, stop chain vaping and slow down so the wick can remain properly saturated and you won’t have to deal with a burnt wick. Taking a break between puffs will also keep you from getting excess juice in your mouth.
How to fix a 510 coil?
To fix this, first change your coil. The one you're using is probably too far gone at this point to save. Then, thoroughly clean the base of your tank, paying special attention to the 510 threads on the bottom. Make sure to also clean the threads on the top of your mod. Insert a new coil, prime it up, and you should be good .
How to prime a coil?
To prime your coil, drip a few drops of ejuice onto each intake port on the coilhead, as well as a couple of drops down the top center and onto the wick. Be careful not to flood the coilhead; we don't want to see juice standing, we just want to saturate the wick.
Do vape tanks have better coils?
Some tanks have better coils than others and it also depends on how often you vape and what wattage you vape on. All coils have a suggested wattage on them if you vape above that it will burn the coil faster. Also mixing juices very frequently can play a factor as well.
Why is my intake port small?
Small Ejuice Intake Port: This is basically the same situation, only instead of being caused by a high viscosity, it's caused by a coilhead that has greatly reduced ejuice intake ports. If you look at your coil, and the holes where the ejuice would flow into look especially small, then that's probably your problem.
Do you prime or pre-soak a coil?
Coil Not Primed: As mentioned at the end of the previous issue, when we install a new coil in our tank, it's best if we "prime", or pre-soak, the coil. This ensures that the wicking material is fully saturated when we fire it up and take a drag. It also helps prolong the lifespan of the wick, as much of the damage done to the wicking material is usually done in the first few hits as it breaks in.
Does Voo Poo have coil heads?
generally speaking, becauCompanies like Smok and voo poo overrate their coil heads and then consumers not knowing any better follow their advice. Right now voo poo has a coil head for their pod systems rated at 60–80w and it's like a .2 mesh! I Vape it at 35w and it would last a month if I'd let it. one of the PNp line. 60 w though? Gone in a couple days.
Why are my coils burning?
When your coils get constantly burnt despite priming them and using lower wattages you now you have an e-juice problem . Carefully check out the label or on-line specs and try a brand with a lower VG content. DIY e-liquid is also a great alternative and it gives way more control over the desired thickness.
Why does my eliquid coil burn?
A coil gets burnt when e-liquid inside the tank fails to properly saturate the wicking material. Because there's no juice surrounding the cotton fibers, they partially get combusted as soon you press the button. Once this happens the coil will still have that off taste to it regardless if you replace the liquid, lower down the wattage or clean the tank.
How long should you wait between vapes?
When this happens let the tank rest for at least minute before taking the next puff. This should be enough to allow more liquid to get soaked into the coil. In the case of juices with a high VG concentration it's probably best to wait at least 30 seconds between draws.
How to increase wattage of a mod?
Once the coil is fully saturated carefully mount it inside the tank. Fill the reservoir with e-liquid and let it sit like that for at least 10 minutes. Power on your mod at a lower wattage and gradually increase it to your personal liking. If you cannot adjust wattage just take a few primer puffs from the tank without actually pressing on the fire button. Tiny bubbles coming from the coil are a good indicator that you're doing a good job.
What does it mean when your vape coils are burned out?
When people say that their coils are “burned out,” what they usually mean is that their coils are covered with residue, which produces a burned flavor. Under the residue, there’s usually nothing wrong with the coil itself. The coil is still perfectly good if you can remove the residue – and that’s exactly what the ROBO2020 automatic vape coil cleaner does. Using only heat and water, ROBO2020 dissolves the residue and returns your dirty coils to like-new condition.
How to prolong the life of a vape coil?
Prolonging the life of a coil begins with ensuring that the wick is always wet, and to do that, you need to be careful about your device’s wattage setting and how frequently you vape.
How to keep coils from burning out?
Finally, one of the most important things that you can do to prevent your coils from burning out is to avoid chain vaping. Waiting between puffs, will give your coil’s wick a chance to draw more e-liquid in. That leads to burned cotton, and burned cotton is one thing that even ROBO2020 can’t fix.
How to make a coil not burn?
Before you install a new coil, prime the wick by using a bottle of e-liquid to wet the wick from all side s. By wetting the wick before you install it, you’ll make the wick more receptive to e-liquid after you fill the tank. Install the coil and fill the tank as you normally do. Wait a few minutes, and when you begin using the coil, the wick should be completely saturated.
How to choose wattage for vaporizer?
When choosing your device’s wattage, your average puff length should factor into your decision. Prefer your vapor on the warm side? You’ll need to keep your puffs a bit shorter to avoid singing your wick. If you prefer longer, deeper puffs, you’ll want to use a lower wattage setting.
How to clean a ROBO2020 coil?
To use the ROBO2020 vape coil cleaner, just place your coils in the device along with some clean water. Start the cleaning cycle. When it’s finished, discard the water and start the drying cycle. The entire cleaning and drying process only takes about 30 minutes from start to finish, and when it’s over, your coils are ready to use immediately. You can usually clean a coil many times before its performance begins to decline, and the resulting savings can be absolutely massive.
How does a vape get hot?
First, think about when you’re vaping but not getting a burnt taste. When you hit the fire button, electricity flows through your coil and it gets hot. The heat given off by the coil is taken up by the e-juice, which is soaked into the wick, and it turns the juice into vapour. Because you have the juice there to take up some of the heat energy given off by the coil, the temperature of the coil doesn’t get too high.
Why does my coil taste burnt?
Given that we know that burnt coils can produce harmful chemicals , you should probably still change it. Occasionally, you’ll also get a burnt taste when you have just replaced a burnt out coil.
How to prime a coil?
To prime the coil, add a few drops of e-juice to the opening in the top (around 3 to 5 is enough) and then soak the exposed wick at the ports around the side. This doesn’t take much for each port, but just ensure the parts you can see are saturated with e-juice.
How to stop coils from burning?
The best ways to stop your coil from burning are: 1 Prime your coils 2 Stop chain vaping 3 Reduce power settings 4 Keep your vape tank topped up 5 Use an e-liquid with more PG 6 Try an e-liquid with less sweetener 7 Use temperature control 8 Use smart mode 9 Use auto-priming technology
Why is my coil head not soaking up?
On many coil heads, the juice has to be at a certain level to even reach the wicking ports. When less of the juice is in contact with the wick, it doesn’t get soaked up as quickly. When your juice level is really low, this can cause problems very easily. The simplest solution to this is to keep your tank topped up.
Why do my juices gunk up?
In general, darker-coloured juices are more likely to impact your wicks and coils than clearer juices.
How long does it take for a wick to dry out?
If you do this, though, you have to leave it for 24 hours (or longer) to completely dry out before you use it again.
Why does my vape coil overheat?
So, what gives? It’s called a dry hit, and it happens when the coil inside your vaping device is not properly saturated with e-liquid, which causes the coil to overheat and singe the wicking material. In some cases, dry hits are caused by user error, but degraded vapour output and a burnt flavour can also be signs that your coil has naturally reached the end of its life.
How long to wait to put a coil in a tank?
Once you’ve done that, install the coil, fill your tank and wait for 5-10 minutes.
What is the best VG for e-liquid?
Equally, higher wattage coils with large wicking ports, such as the Innokin Ajax 0.16Ohm are suited to e-liquids with higher VG content. For coils like this, 70% VG is the best place to start. Choosing the appropriate VG/PG e-liquid for your device is key to extending coil life.
Why is the pressure of e-liquid important?
When a tank or device has plenty of remaining e-liquid, the pressure of the e-liquid helps to keep the coil fully saturated and ensures that the wicking ports of your coil are fully submerged.
What wattage is the Innokin Sensis coil?
For example, if you are using an Innokin Sensis, with the 0.25Ohm S-Coil, you will notice that the recommended wattage range is 25-35W. Starting at 25W and slowly increasing the wattage until you find a satisfying setting will prolong the life of the coil. Even if you end up preferring 35W, giving the coil time to reach its maximum output allows it to become saturated and heat evenly.
Does sweetener ruin a vape coil?
As you vape, the sweetener in the e-liquid may leave residue on the coil. Over time, this decreases wicking efficiency and causes a burnt flavour. Similarly, some flavourings that are dark in colour degrade the coil more quickly.
Can you use VG in Innokin coils?
It’s important to know that e-liquids with very high VG content may not be suitable for all coils. “Max VG” blends, for example, typically contain 80% VG or more. These e-liquids will not be suitable for low wattage Innokin coils, such as the T18E 1.7Ohm. When using a low wattage coil with smaller wicking ports, try e-liquids with 60% or less VG content.
