Kanthal, stainless steel, and nichrome are the three most popular power mode wires right now, and you might be wondering what would be the best one for you. Again, take note that if you have (or suspect you may have) a nickel allergy, then you should not vape on nichrome coils, and maybe you should also avoid stainless steel.
Full Answer
What type of wire is used for vaping?
Some wire is used for vaping with wattage, some with temperature control, and one main type we’ll talk about can be used for both. None of the information should overwhelm you or burden you in technical data. It’s a high-level overview. The focus will be on single-strand wire, and only on wires that are commonly used for vaping.
Why are different vape wires different?
Different gauges (diameter) of vape wires will give you different resistances & ramp up times, while different types of vape wires will give you different flavor & cloud production. Even if you aren’t building your own coils, it can be hazardous to use coils of certain materials in the wrong mode (see Nickel wire down below).
Is nickel wire better for vaping?
While nickel wire can offer better flavor and a faster ramp up time than some other vape wires (such as kanthal), it should only ever be used in temperature control mode. If nickel wire gets too hot and overheats, and you can end up with nickel or even graphite in your lungs.
Does the thickness of a vape wire affect performance?
In addition, a thicker wire will have a lower resistance while a thinner wire will have a higher resistance. This also affects how quickly the wire heats up. The time it takes for the wire to heat up to appropriate vaping temperatures is called “ramp-up time”.
What is the safest wire for vaping?
Stainless steel is the most unique of the common vaping wires. It can pull double duty and be used for straight wattage vaping or temp control vaping. Stainless steel wire is an alloy composed primarily of chromium, nickel, and carbon.
What wire can you use for vape?
There are five commonly used types of vape wires. These are: kanthal, nichrome, stainless steel, nickel, and titanium.
Is Nichrome wire safe to vape?
NiChrome is a good vape wire, but there are a few caveats to using it. Since it's an alloy of nickel and chromium, it has a really fast ramp-up time – it can heat up really fast, which means that complex coil builds can really benefit from it.
What gauge wires are used for Vapes?
Vapers usually use 22, 24, 26, 28, 30, and 32 gauge wire. The bigger the number of the gauge increases, the thinner the wire gets.
Is stainless steel good for vaping?
Stainless steel works in temperature control mode for those who prefer TC vaping. Since it also works in wattage mode, though, there's no chance of configuring things incorrectly.
Can you vape stainless steel in wattage mode?
Stainless steel: this wire is very popular and readily available. It comes in various grades such as 304, 316, 316L, 317, and 430 but the most common is SS316L. SS can be used in wattage or temperature control mode.
Is titanium safe for vaping?
5:119:15The Burning Question: Is Titanium Safe To Vape? - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt is possible that titanium could combust titanium dust into small shards of titanium. It canMoreIt is possible that titanium could combust titanium dust into small shards of titanium. It can actually start to burn at temperatures as low as 330 degrees Fahrenheit.
Which is better nichrome or kanthal?
Kanthal has a slightly higher maximum operating temperature as well as a higher melting temperature than Nichrome, giving it a slightly longer lifespan than Nichrome. Some people claim that Kanthal wire puts off a slightly metallic taste due to the Iron composition, whereas others claim it does not.
Are stainless steel coils safe?
For that reason, stainless steel is considered an ideal material for pots and pans and other cooking tools. You can rest assured that the steel won't melt or otherwise leach into your food. Now, some might be more concerned about the thought of using vaping coils made from this material.
What's the best coil for vaping?
See the longest lasting coils of 2019.Freemax Mesh Pro Coils. The Freemax Mesh Pro is a fantastic, sought after coil with a very respectable life span of around 2 – 3 weeks. ... Uwell Valyrian Coils. ... HorizonTech Falcon M2 Coils. ... Smok TFV8 Baby V2 A3 Coils. ... Aspire Odan Coil 0.2 Mesh.
What coil is best for flavor?
The best ones to go for flavour wise are clapton, titanium (if you prefer vaping with TC mode) or an Alien coil. The sweet spot for getting a balance of vapour and flavour is around 0.3ohms. Depending on your coil choice you'll want to up the wattage from anywhere between 50 and 100 watts.
What is Tiger wire vape?
The tiger coil is simply just a twisted coil containing a single round strand and a single flat ribbon strand. Twisting two differently shaped wires gives it more pockets and grooves than a standard twisted coil. This creates more heat and denser vapor, giving it an improvement in flavor over single-strand builds.
What type of metal is used in vape coils?
The most commonly used coils are made of alloys of iron, chromium, and aluminum or nickel and chromium.
What is the best coil for vape?
The Best Vape Coils Are:HorizonTech Falcon 2 Coils.Freemax Fireluke 3 Coils.HorizonTech SAKERZ Coils.Flatwire UK Flat Sixty 22g Flat Wire.Freemax Quad Mesh Coils.Aspire Nautilus BVC Coils.SMOK Nord Coils.Vaporesso EUC Ceramic Coils.More items...•
Which is better nichrome or kanthal?
Kanthal has a slightly higher maximum operating temperature as well as a higher melting temperature than Nichrome, giving it a slightly longer lifespan than Nichrome. Some people claim that Kanthal wire puts off a slightly metallic taste due to the Iron composition, whereas others claim it does not.
Is titanium safe for vaping?
5:119:15The Burning Question: Is Titanium Safe To Vape? - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt is possible that titanium could combust titanium dust into small shards of titanium. It canMoreIt is possible that titanium could combust titanium dust into small shards of titanium. It can actually start to burn at temperatures as low as 330 degrees Fahrenheit.
What are the things to look for when choosing a vape wire?
There are three things way pay attention to when choosing a vape wire – flavor, vapor production, and ramp-up time (how fast the wire heats up). Knowing the properties of each of these wires will give you an opportunity to find one that matches your particular vape style more easily.
What metal is used to make vape wires?
Those materials are: Kanthal (FeCrAl) NiChrome (Ni80) Nickel (Ni200) Stainless Steel (SS) Titanium (Ti) Each of these materials is specific, and vaping with it will produce different results.
What is TCR in vaping?
TCR is a complex calculation that tells the device how to regulate things to keep the resistance of the vape wire steady and even throughout your vape session. The mod delivers short, intermittent pulses of current, making sure that the temperature never exceeds safety limits.
What are the two modes of vaping?
In essence, there are two different modes of vaping – the wattage mode and the temperature control mode. Not every wire can be used in both of these modes! If you try, and you don’t know what you’re doing, you’re risking a battery mishap or, worse yet, poisoning yourself. So, tread carefully!
Why does a 20 gauge wire heat up so slowly?
That’s because the resistance of the wire goes down, meaning that it takes more time to heat up. 20 or 22 gauge (thicker) wires will heat up slowly, but same is true for coils that are made from thinner wires but have multiple strands (exotic coil builds such as the Alien or Clapton).
What is SS wire?
Stainless steel wire is available in a lot of grades (316, 316L, 410, 413, just to name a few) and most of these grades are suitable for use when building vape wires. However, because there are so many options, there’s often confusion as to how good SS really is – that’s because some talk it up, while others hate it with a vengeance. Of course, these people are usually talking about totally different SS wire grades.
What is the TCR of a nickel wire?
Vapers familiar with temperature control mods will remember that nickel was, in fact, the first wire used for it. Its TCR is a nice, round number (0.006) , which means that it’s easy for devices to calculate how much power needs to be applied to it and when to cut it to maintain a safe temperature. With that said, you need to know that nickel should only ever be used with TC. It has a propensity to overheat when used in wattage, which means that it can catch on fire and melt, leaching harmful substances into your vapor.
What is the best wire for vaping?
Nichrome Wire. Nichrome wire is another great wire that can be used for vaping, and is a nickel and chromium alloy. While less commonly found in stores than kanthal, nichrome is similarly resistant to oxidation and can function at high temperatures without being damaged.
What is the most common wire used for vaping?
Kanthal is the most common wire used for vaping, and is a ferritic iron, chromium-aluminium alloy. Because of its inexpensive price, wide availability, and resistance to oxidation kanthal is a great material for building coils.
What is the best vape wire?
Stainless Steel is a special vape wire that can be used with either wattage or temperature control mode, and is a chromium, nickel and carbon alloy. While stainless steel comes in a variety of grades, 316 is medical and food grade and is perfect for vaping.
What does different gauges of vape wires do?
Different gauges (diameter) of vape wires will give you different resistances & ramp up times , while different types of vape wires will give you different flavor & cloud production. Even if you aren’t building your own coils, it can be hazardous to use coils of certain materials in the wrong mode (see Nickel wire down below). ...
How does a coil temperature control work?
To keep things simple, temperature control mode works by using the TCR or temperature coefficient of resistance of a given wires material. Materials like nickel behave predictably with regards to their resistances at certain temperatures. Your mod uses this information to regulate the current to the coil as it heats up and will reduce the current to the coil if it gets too hot, in order to keep the coil at a safe operating temperature.
How many types of wires are there for vaping?
There are five types of wires that are commonly used for vaping, and they each have differing uses and properties. Some wires can only be used for vaping with wattage, some only with temperature control mode, and one special wire can be used with either. We will discuss each one in detail down below, but first a lesson on wire gauges and resistance.
Which vape wire heats up the fastest?
Nickel heats up the fastest out of all vape wires and was the first wire used with temperature control mode. Because of its soft and springy nature, nickel wire is harder to work with than kanthal or nichrome. While nickel wire can offer better flavor and a faster ramp up time than some other vape wires (such as kanthal), ...
What is nickel wire?
Nickel wire is commonly known as Ni200 (or pure nickel) and creates some of the best flavorings you can find in vaping. It is the first type of temperature control wire to be utilized. Other common disadvantages include (but are not limited to) difficulties creating uniform coils and deformation during the wicking process.
Why is titanium wire used for temperature control?
Titanium wire is only recommended for use with temperature control because once titanium reaches its maximum heat capacity, it releases titanium oxide. Plus if used with wattage mode and you go above the temperature capacity, you risk having a nearly impossible to put out fire on your hands.
What is Kanthal wire?
Kanthal is the wire that started everything. It is the most commonly used vaping wire for over a decade. It is preferred by amateurs and industry professionals alike and is recognized as an extremely affordable, high-quality vape wire that works only with wattage mode. Kanthal is oxidation resistant, durable, and is the easiest type of vape wire to work with. Plus, this type of vape wire is able to withstand exceedingly high temperatures before it begins to melt.
Is Nichrome good for vaping?
NiChrome is recommended for those vaping using the wattage mode. It is a popular choice among advanced build vapers because NiChrome requires very little time to heat up, it holds it is shape well, and is very easy to work with. Nonetheless, it is very important for users to consider prior allergies before using this wire type. In fact, anyone who is allergic to Nickel should avoid using NiChrome wires.
What is the best wire for vaping?
This is because it’s the only material that can be used in VW mode as well as TC. It doesn’t release any hazardous byproducts and the flavor is just perfect. There are several SS alloys out there but we prefer SS316L. This is also used in the medical, food and pharmaceutical industries.
What gauge wire do I use for vaping?
All these vape wires come in 10m spools and are generally grouped by gauge or diameter. When building coils we usually use gauges 22, 24, 26, 28, 30, and 32. The higher the gauge, the higher the resistance. At the same time the higher the gauge the lower the diameter. This means AWG32 is the thinnest and AWG22 is the thickest. AWG32 has the highest resistance and AWG22 the lowest. Low resistances account for big ramp-up times.
What element is used in vaping?
Kanthal or iron-chromium-aluminium (FeCrAl) is the most commonly used in vaping. With a melting point of 1,500 degrees Celsius this makes the perfect heating element inside our atomizers. It’s fairly durable, easy to work with and the resistance is predictable using online calculators or phone apps. It’s also inexpensive and widely available. We recommend it to all beginners.
What is a coil in a vape?
The coil is essentially a piece of wire which was wrapped around a cylindrical rod. Depending on its thickness, physical properties and the number of loops this has a specific resistance, measured in Ohms. There are five main types of vape wires:
What is a Ni200 coil?
Nickel or Ni200 is one of the first types of wire to be used with temperature control. Most of the regulated mods out there have a TC mode for Nickel . However, you will mostly find it inside stock coils. This is because the material can be tricky to work with and can be dangerous when used the wrong way. Nickel coils usually have a very low resistance and are mainly intended for sub ohm vaping and direct lung draws.
Why does my vape pen stop working?
Wire issues are a common reason good vape pens stop working. Before tossing your pen, try a few simple repairs. First, clear all debris out of the heating chamber. If the chamber looks clean, use a paperclip to adjust the coil’s positioning in the chamber.
How to fix a broken vape pen?
Before throwing away your broken vape pen, try clearing out any debris inside of it to see if that fixes the problem. Start by unscrewing your vape pen's heating chamber and brushing out any loose material. Once you remove the surface debris, dab isopropyl alcohol onto the coil to remove wax and oil.
How to solder wires?
Heat the soldering iron and dab it against a wire solder. First, pick up a spool of solder wire from the home improvement store. Unspool it, laying the end of the wire near the wires you wish to solder. Turn the iron on and, after letting it heat for a minute, dab the tip against the end of the wire.
How to remove a vape pen?
The top part of the pen is the mouthpiece, or tank. Twist it counterclockwise to remove it. Next, you will see the heating chamber with the coil inside of it. Pull it off the same way, leaving the wire coil in place.
What to do if your pen won't work?
Turn on the pen and, if done correctly, it should work again. If it doesn’t, return the pen to the store to have a professional look at it or buy a new one. The wires may have come loose from their connections. This is hard to fix at home, especially if you can’t locate the terminals for the wires.
Where is the black wire in a furnace?
The black wire is the ground wire and runs from the battery to the outside of the heating chamber. Heat the soldering iron and dab it against a wire solder. First, pick up a spool of solder wire from the home improvement store. Unspool it, laying the end of the wire near the wires you wish to solder.
What to wear when welding?
Wear safety glasses to protect your eyes. A nice pair of polycarbonate glasses are essential when welding. Since you are working with small wires, you probably won’t be able to wear gloves. Use tweezers to hold the wires and put the hot soldering iron in its stand when not in use.
Top Vaping Wire for Building Vape Coils
Fortunately, we've taken care of the hard work for you. By trying all the most popular brands, our selection has been narrowed down to only the top products, making decisions easier.
Atomic Wire - Ohm Run Hitters
Atomic Wire Looks like any other vaping wire on the market. However, once it is inside your vape, the differences couldn't be any easier to notice. Other wiring brands haven't been nearly as durable, especially when heated frequently. Vapers often run through shoddy materials rather quickly, but these seemed as if they lasted forever.
Aspire Mini Triton Clapton Coil 5 Pack
Built for the Triton vape, the Aspire coils are a force to be reckoned with. Not only are they reliable, but they are also available with multiple wiring options. Nickel sounds like it's somewhere in the middle, neither too resistive nor conductive. You could also choose to work with some Kanthal wiring.
Smok V8-Baby Q2 Dual Core Replacement Coils (5 Pack)
Smok's coils are still some of our favorites, on account of how tasty they make each hit. The V8-Baby Q2s are from another planet, so to speak. Most coils, in today's market, are only meant to use a single wire. These, on the other hand, happened to take advantage of two of them. They are dual-coil-style coils.
Vaporesso C-Cell Coil 5 Pack
Vaporesso has been so great at meeting customer demands they've built their reputation on it. Other manufacturers stick to the same, tired and boring, concepts. Innovation hasn't been as common as it had been years ago. Yet, they've managed to break that trend, thanks to these unique coils.
KA1 100 Foot 22 Gauge Wire Spool - Demon Killer
For those who would prefer building their own vapes, this wire offers more than enough material to build several coils. As such, you'd only need to purchase a single spool for most purposes. 100 feet of wire could build dozens of functioning coils, each performing optimally.
Ni90 Comp. Wire - Mad Bomber Wire
Nickel still reigns supreme when it comes to coil-building. Other materials simply don't match nickel's unique characteristics. Fortunately, we've got plenty of options, so finding something perfect isn't a problem. Durable and conductive, coils built of this should meet even the most stringent expectations.
What is a vape extreme?
Vap’Extrême is a French company that offers resistive vaping wires of different diameters in alloys such as Kanthal, Nichrome 80 or 90, SS, but also ribbon and flat wire. Its wire is marked with Sandvik which is considered to be among the best on the market. High purity and good durability.
What is stealth vape?
Stealth Vape is a UK site that offers resistive vaping wires of good quality. He is also the representative of Evolv in Europe which notably makes the DNA chipset. The prices are in pounds sterling, but we find an equivalence with the prices of other manufacturers of resistive wires.
What is twisted mess wire?
Twisted Messes is an American company and site. It offers resistive vaping wires in Nichrome80 and Kanthal. It’s also Sandvik, so great quality. His wire is more expensive than what can be found elsewhere. For example, a reel of 100 Nichrome80 feets costs $ 19.99. That’s okay, but nothing more. In terms of delivery, it is mainly intended for the American market. But if you find Twisted Messes wire near you, don’t hesitate, it’s good stuff.
