To fill the Cerberus tank, twist off the tank’s top metal hardware. You’ll see two semi-circular filling holes next to the tank’s centre air channel. Add e-liquid through either of the filling holes until the tank is nearly full.
Full Answer
What is the Cerberus subohm tank from geekvape?
The Cerberus Subohm tank from GeekVape was sent to me for review from HeavenGifts.com. This is a 27mm tank that uses mesh coils and has a 5.5ml e-juice capacity. Let’s talk more about it. Colors: Black, Blue, Gunmetal, Rainbow, and Stainless Steel
How do you put the Cerberus tank together?
Putting the tank together is as easy as any other tank. I did find that putting the glass onto the top cap section first works better than putting the glass on the deck first. But other than that, just screw in the coil and put everything back together and get to vaping. The Cerberus uses what Geekvape is calling a Super Mesh coil system.
How much e-juice can I put in the Cerberus?
The fill holes are big so no problems getting e-juice in there. The Cerberus comes with bubble glass preinstalled, which holds a max of 5.5ml. The package also has a regular straight glass tank which holds 4ml.
What coils does the Cerberus use?
The Cerberus uses what Geekvape is calling a Super Mesh coil system. I’m not sure what makes it SUPER mesh, but honestly, these coils kick ass. They are the same coils used in Geekvape’s Illusion Mini tank, the Aero Mesh tank, and the Shield Tank, so if you’re looking for replacements, you’ll probably find them listed as IM & Aero Mesh coils.
How do you fill a Cerberus vape?
Step #1: Remove the Cerberus Sub-Ohm Tank and the Super Mesh Coil from the packaging. Step #2: Choose a box mod to use with this tank. Charge its batteries. Step #3: Select which e-juice you're going to be using with the tank.
How do you use the geek vape Cerberus?
0:374:13Review of the Geekvape Cerberus Sub-Ohm Tank - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou need to push down hard before twisting to get it on and off but I have noticed that it getsMoreYou need to push down hard before twisting to get it on and off but I have noticed that it gets looser over time.
How do you fill a GeekVape tank?
0:102:03How to Fill Vape Tanks - YouTubeYouTubeStart of suggested clipEnd of suggested clipSimply twist the top insert. The tip of your liquor bottle into the hole and squeeze.MoreSimply twist the top insert. The tip of your liquor bottle into the hole and squeeze.
How do you open the GeekVape Cerberus tank?
1:325:30How to replace a geekvape cerberus coil. - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd you grab the bottom of the tank. And the top of the tank. And you just twist counterclockwise.MoreAnd you grab the bottom of the tank. And the top of the tank. And you just twist counterclockwise. The whole tank should come apart. So you pull the top off and then you can grab your glass.
How long does a Cerberus coil last?
1-2 weeksReplacement Coils for the GeekVape Cerberus Tank are available with a 0.2 ohm or 0.4 ohm resistance and are sold in packs of 5. Changing your coil regularly is the best way to keep the flavour in your device fresh. VapeMeet recommends changing your coil every 1-2 weeks.
Is Cerberus tank good?
As for the Cerberus sub ohm tank, even though it's been around for a while now, it's still a really good sub ohm tank. I liked the top fill mechanism, very easy and straight forward to fill. Coil performance was impressive and I will be trying the other coil options. The only downside was the 2ml capacity (damn TPD).
How do you put vape juice in a vape?
Saturate the coil with several drops of e-liquid by using a dropper to put a drop of e-liquid inside each hole. Replace the coil and attach your atomiser back to the tank. Next, unscrew the top of the tank to add your e-liquid. Most e-liquids come with a dropper to make adding e-liquids quick and simple.
How do you put liquid in a vape pen?
Open System devicesUnscrew the mouthpiece and battery from the clearomiser.Place the nozzle on the inside wall, avoiding centre tubing.Squeeze to fill the clearomiser. ... Screw the mouthpiece and battery back onto the clearomiser.Take a few shorter drags to prime your device for the best vapour production.
How do I top up my vape?
How to refill a vape podRemove the pod from the vape battery.Find the rubber bung that covers the fill port.Lift up this rubber bung to show the filling hole.Place the nozzle of your e-liquid bottle into the hole.Tilt the vape pod at a slight angle to prevent air pockets.Slowly fill the pod with e-liquid.More items...
Why is my tank leaking juice?
Overfilling is an obvious one. Putting too much e-liquid into your tank or pod can cause it to leak. Too much e-liquid can cause the coil to become flooded or for e-liquid to leak past seals when replacing the cap. Many tanks have recommended fill levels to prevent leakage and other problems caused by overfilling.
How do you hit a Geekvape?
The Geek Vape Aegis Hero uses a button-activated firing system. The fire button is the large button positioned directly over the device's screen. To vape, hold the button down while puffing on the device's mouthpiece.
What coils will fit Cerberus tank?
These tanks are also compatible with Smok Baby Beast/Prince Baby coils, NRG GT coils, Ello HW coils, Wotofo Flow/Flow Pro coils.
GeekVape Cerberus Sub Ohm Vape Tank
The GEEKVAPE Cerberus sub-ohm tank provides excellent flavor delivery and fantastic cloud production.
Geek Vape Cerberus 25mm Sub-Ohm Tank Features
25mm Diameter 4mL eJuice Capacity 5.5mL Bubble Glass Superior Stainless Steel Construction Super Mesh Coil System 0.2ohm Super Mesh X1 Coil - Rated for 60-80W Compatible with TFV8 Baby Coils Threaded Top-Fill Design Dual Slotted Adjustable Bottom Airflow Control 510 Connection
Wolfpacker Full Member
I have the Geekvape Aegis Mini which is an incredibly tough piece of equipment, and it came with the Cerberus sub-ohm tank. The first one I owned never leaked until I cracked the glass & had to replace, and I bought 2 brand new ones and both leak so much it gets on your clothing, furniture if you're not careful.
Shawn Hoefer ECF Guru Verified Member ECF Veteran
Geekvape Zeus Subohm tank, Smok X-Baby, Aspire Cleito Exo. There are also a lot of top air, leak resistant RTAs available.
Wolfpacker Full Member
thank you Shawn! You have no idea how much you've helped me. I should've came here long ago to get advice. These Cerberus tanks vape great but are constantly dripping onto my shirt, furniture. Stupid design IMO, to put the air inlets at the base where the liquid is. I'm going to order 2 or them so I can have my std.
