Red light pulses if the battery level is between 0 to 70% during charging. When the battery reaches 70% to 100%, the green LED pulses. The green light remains lit when the battery is fully charged.
Full Answer
What kind of battery does the geekvape frenzy kit have?
The Frenzy Kit comes with a built-in 950mAh battery, GeekVape’s new AS Micro chipset, which delivers both Power & TC modes. It also utilizes replaceable NS coils and comes with a 0.7ohm Mesh (DTL), and 1.2ohm SS316L (MTL) included in the kit.
Is the geekvape frenzy worth it?
The Geekvape Frenzy is an outstanding device and a very complete kit. It delivers where other pod systems like it fall short. It’s simple to use, offers both Power & TC, DTL & MTL, and most importantly, an excellent, consistent vape experience – Highly recommended.
What is the Geek vape frenzy pod system?
The Geek Vape FRENZY Pod System is an exquisitely crafted all-in-one vape kit, encapsulating all the of finest qualities such as advanced AS chipset with Power Output / Temperature Control Mode, 950mAh internal battery, and utilize the NS Mesh Coil Technology.
How do I check the battery life of my vape?
Normally when you press the fire button to vape, the LED will show you your temp/power preset color. To check the battery life remaining, press the fire button twice: red light (0-30%), blue light (31-69%), and green light (70-100%). The battery life light will flash a couple times before turning off.
How do you use the geek vape frenzy?
5:508:45Geek Vape Frenzy Pod System Kit Review & Tutorial - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd it's on the device the pot is on the device you just simply turn here alright so the device isMoreAnd it's on the device the pot is on the device you just simply turn here alright so the device is eighty. Six point one millimeters by fifteen point seven millimeters.
Why is my geek vape flashing red?
If the red light flashes 3 times, it means that there is no atomizer connected, please change another pod or replace the coil and try again. 2. If the red light flashes 5 times, it means the battery is too low, please charge the battery full and try again.
How do you open the geek vape frenzy?
How To Fill The Geekvape Frenzy PodRemove the pod as described above.Turn the pod upside down.Lift the edge of the filling flap and open it to reveal the fill ports.Add e-liquid through either port whilst observing the level through the side of the pod.Replace the filling flap and make sure it is fully closed.
How do I prime my Geekvape frenzy coil?
How To Prime MTL Vape CoilsInsert a new vape coil into the base of the tank.Fill the tank with e-liquid and assemble the tank.Allow the coil to sit for five to ten minutes to fully saturate the wick.Start vaping.
Why does my vape blink 3 times?
Certain batteries will flash 3 times to indicate a short circuit. Most standard e-cig batteries will have what's called short circuit protection, so when there is a short and you press the fire button it will just blink 3 times and then won't do anything.
Why does vape blink 4 times?
Vape pen blinks 4 times Some pens will blink 4 or more times when the atomizer resistance is lower than 0.1 ohms or higher than 2.5 ohms. Due to the lower resistance, the battery will automatically shut down the output to protect the pen. All you have to do is wait, then put the pen on again.
How long does it take for a geek vape to charge?
The Geekvape 1FC pod system features a 2ml pod which had non replaceable coils, but has a 3-step power output, along with an LED indicator, automatic draw and a USB-C port for a full charge of the 550mAh battery in just 15 minutes!
How do you fill a Geekvape?
How to Fill the Geek Vape Cerberus Tank. To fill the Cerberus tank, twist off the tank's top metal hardware. You'll see two semi-circular filling holes next to the tank's centre air channel. Add e-liquid through either of the filling holes until the tank is nearly full.
How long should I let juice sit in new pod?
It's always recommended to leave your coil to prime for as long as possible - anywhere between 5-30 minutes. The longer you leave it the better, but most coils should be ready to vape after around 5-10 minutes.
What happens if you don't prime your coil?
Unfortunately, if you didn't prime your atomizer / coil properly and your wicking material is burnt, there is no way to bring it back. That taste will stay until you change your atomizer head containing a new coil.
Can you over prime a coil?
An over primed coil will give off a gurgling sound (and feel) when you try to draw on your vape. As you can imagine this leaking and gurgling leads to spitting back. You'll be getting splashes and “spits” of your vape liquid when you're trying to use your vape.
What is a geek vape?
The GeekVape Frenzy Kit was designed to deliver the best vape possible, and it does this by bringing all of its intricate parts and features into one all-in-one device. It stands just 86.1mm by 37mm by 15.7mm and is constructed of a durable zinc alloy material. On the outside, it has a sleek design that is available in many colorways to enhance its overall appearance, while the inside is really what’s most impressive. Integrated into the device is a 950mAh rechargeable battery, along with an AS Chipset that has several working modes. These modes include a voltage mode, power mode, boost mode, and temperature control mode. It offers coil dependent firing modes, automatic output matching function, and even features an LED battery life and charging indicator light.
What is the guide to vaping?
Guide To Vaping is the largest online magazine blog that is dedicated to providing a vast selection of helpful and informative articles about the latest vaping news, vapor products, and CBD.
Is the geekvape pod refillable?
The GeekVape Frenzy Pod is just as vital when it comes to sharing information because, without it, all of those features, technology, and power would go to waste. The pod is refillable and replaceable and features a bottom fill system with dual ports.
What is geekvape frenzy?
The Geekvape Frenzy is a new little AIO that looks eerily familiar. Similar to what SMOK did with the Trinity Alpha, Geekvape appropriated the basic design of the Lost Vape Orion. This design will likely become known as the “Orion-style”—expect more brands to follow suit soon.
What is the Lost Vape Orion?
This design will likely become known as the “Orion-style”—expect more brands to follow suit soon. Aside from the general design, the Frenzy has its own identity. It has impeccable manufacturing, and it features ...
How many pods does the Frenzy have?
The Frenzy comes with one 2 mL pod and two types of coils. The pods slide into the battery housing on a track system with a magnetic connection. It inserts with remarkable ease, but it’s removed with too little effort. The magnets are strong enough to hold the device by the tip, but you wouldn’t want to jerk it. Similarly, if you drop the device, the pods will most likely pop out.
Our Thoughts about the GeekVape Frenzy
The GeekVape Frenzy has a lot of features that make it a device worth considering. It contains the AS Micro Chipset, which can detect the coils being used in the pod and change the output mode accordingly. Complementing this is a powerful 950 mah battery that can last an entire day.
What Comes in the GeekVape Frenzy Pod Kit?
The Frenzy pod kit comes with everything needed to get started vaping. There is the pod system itself, followed by the two coils, a micro USB cable for charging the device, and an easy to read and understand user manual.
Internal Building Quality and Design
The external design of the GeekVape Frenzy is great, especially with the wide range of colors available. Internally, everything is pretty good, too. The pods use anti-leak technology, and the coils are easy to access.
Versatile Coil System
Of all the things about these pods, the interchangeable coils are the best part. The kit comes with one pod and two coil heads. Access them by turning a threadless cap a quarter of a turn and then replace them.
How to Use the GeekVape Frenzy
The GeekVape Frenzy is easy to use. To get started, first examine the package and make sure everything is there. Read the user manual to develop a full understanding of the device. Charge the mod if it is not already charged.
Competitors
Like the GeekVape Frenzy, the Lost Vape Orion is a powerful device that uses a 950 mah battery that can last the entire day.
Final Verdict on the GeekVape Frenzy
This device is certainly worth it for those looking for a modifiable pod mod that can last an entire day while delivering deep mouth-to-lung hits. It performs incredibly well thanks to its smart chip system that can adjust to the coils placed inside the pod. That is probably the coolest feature about this system.
What is geekvape frenzy?
The Geekvape Frenzy is an outstanding device and a very complete kit. It delivers where other pod systems like it fall short. It’s simple to use, offers both Power & TC, DTL & MTL, and most importantly, an excellent, consistent vape experience – Highly recommended.
What is the difference between geekvape and geekvape frenzy?
Firstly, and rather importantly, the GeekVape uses replaceable coils, which is a huge plus.
How much does the Frenzy pod weigh?
The Frenzy measures in at a very slender and pocket-friendly 86.1mm high, by 37mm wide and 15.7mm deep, and even though it has solid construction only weighs 100g. Now you might say that’s reasonably heavier than other pod systems, and you’d be right as the Orion only weighs 87g.
How to replace coils on Frenzy?
As mentioned above the Frenzy comes with two coils in the kit: To replace the coils you first need to remove the AFC ring from the pod. This is done with a quarter turn counterclockwise, you then just simply pull the AFC base from the pod. You can then unscrew the coil from the base and replace with a new one.
What chipset does the Frenzy use?
The Frenzy uses GeekVape’s new AS Micro chips et, which features both Power/Wattage Mode and TC Mode. The mode itself is determined by the coil you attach, which GeekVape call ‘automatic output matching function.’. If you use the 0.7ohm Mesh (kanthal) coil, it will default to power mode.
Is Frenzy a stubbier pod?
The Frenzy is also a lot stubbier in its form compared to other pod systems of this style, and even with a touch more width, it’s an absolute joy to hold. Despite its quite rectangular shape, there are no sharp edges, as each corner has an ever so slight curve to it.
Is the Frenzy the same as the Orion?
The Frenzy has the same solid feel in the hand as the Orion with it’s Zinc alloy frame providing a reassuring amount of sturdiness and quality. On either side of the device are two resin panels, which are super smooth to touch and in my opinion feel even better than the Orion’s.
ArminF Super Member ECF Veteran
Automatic output matching function: when connected to 0.7ohm coil, the output will adjust to power mode (2.5V/2.7V/2.9V); When connected to 1.2ohm coil, the output will adjust to TC mode.
Lowjumper Senior Member Verified Member ECF Veteran
Saw it last night on Efun, it takes replaceable coils but the ones I found were pricey, like 14.oo for 5 BUT a lot cheaper than pods!
cardsfan300 Super Member ECF Veteran
Anyone had a chance to try this yet? I see it takes the flint coils. May pick this up when available.
gpjoe Ultra Member Verified Member ECF Veteran
Definitely want to try this one - the Orion Go was a no-go for me. I had two and sold them right away due to the crappy MTL performance. I have seen the Frenzy for 25-30 bucks on pre-sale, so I'll be all in when they are released. Supposed to be mid-May.
Aaron86 New Member
Anyone had a chance to try this yet? I see it takes the flint coils. May pick this up when available.
Nancy D Senior Member
Wow, I was looking at that last night. The price was a bit much, though.
Lowjumper Senior Member Verified Member ECF Veteran
Efun top has them in stock for 20.00 don't know about shipping. The pods and coils are still on pre order.
How long does it take for Aegis Mini to charge?
Aegis Mini is powered with 2A fast charging, which can charge up to 80% in just 30 minutes when you use 5V/2A charging head, but it needs around 2 hours to be fully charged. Why? It depends on lithium battery itself. The following is some information about charging process of lithium battery:
Why does my vape spit back?
Other possible reasons for spit back may include the following: using high PG e-juice in conjunction with a sub ohm coil, chain vaping from a tank which gets fairly hot as the heat thins your ejuice, a coil which is wicking the cotton too quickly.
What does it mean when the fire button on a atomizer doesn't work?
If you press the fire button but the device does not fire, 1.If the red light flashes 3 times, it means that there is no atomizer connected, please change another pod or replace the coil and try again. 2.If the red light flashes 5 times, it means the battery is too low, please charge the battery full and try again.
Why is my e juice not turning into vapor?
The e-juice in that instance is too thick for your low wattage device and coil, therefore the e-juice doesn't heat sufficiently to turn into vapor. The more common reason is that you've flooded the coil when priming, excess juice in the coil which can't vaporize quickly enough results in gurgling and/or spit back.
Why does my coil taste burnt?
Given that we know that burnt coils can produce harmful chemicals , you should probably still change it. Occasionally, you’ll also get a burnt taste when you have just replaced a burnt out coil.
Is Aegis Legend shockproof?
Aegis Legend: Waterproof Statement. As we all know Aegis lines are waterproof, shockproof, and dustproof. This article will talk about the waterproof feature of the Aegis lines. To know more about the product's shockproof feature, please click here.
AEGIS MAX wattage drop
I am using 21700 from molicell from AliExpress on my Aegis Max with Wotofo stapled coil resistance rating 0.24 ohm. Usually I vape at 60W Battery being fully charged the power drops to 30W. What is wrong and how can I fix. P.S. I charge with Litokala charger I vape single coils. Please help
Aegis legend
Just bought new molicel batteries now my vape keeps shutting off never have used USB port have a charging dock I had the mod before this and did the firmware update now doesn't work so got this legend now having issues.. starting to wonder how reliable products are
About the Z Series coils.
Let me begin by saying that, overall, I am very happy with my new (ish) Aegis Legend (OG) and Zeus tank kit.. It is a considerable upgrade from the SMOK V8 Stick, AL85 and E-Priv that I have been through since I threw away the fire sticks and began vaping..
Aegis X firmware download? (firmwares unavailable via GeekVape site?)
Firmware links are greyed out for all devices on the geekvape site ...does anyone know where or how I can obtain the latest Aegis X firmware?
1.2 aegist boost plus coils does not fit in my device did anyone knows why ?
Geekvape aims to provide the best quality experience to the e-cigarette users across the world. Welcome here, please feel free to share anything relating to e-cigarette with us.