If your battery reads too low, the device will blink red and shut down. If your device overheats, it will blink three times before turning off. In the case of a short circuit, the mod will turn the device off automatically.
Full Answer
What does it mean when your vape is blinking red?
When there is not enough power coming from the battery, your vape will give a blinking light (a red light with some devices) to let you know it needs to be charged. To see if this is the case, charge your vape until the light stays on (or stays green), indicating a full battery.
How many times does the LED light flash when vaping?
1. 8 seconds protection: the white LED light will flash 5 times when vaping for longer than 8 seconds, and the battery will automatically shut down the output. 2. Short circuit protection: if a load short circuit is detected, the white LED light will flash 4 times and the battery will automatically shut down the output. 3.
What does the LED light behind my vape’s fire button mean?
You may want to know that the LED light behind your vape’s fire button is used by most manufacturers to give you any warnings or signals that could interfere with your vaping experience, especially if the device doesn’t have a digital display.
Why are my vaporizer lights blinking?
Depending on your device’s type of display, blinking lights may be used to indicate a single condition or a number of different conditions. The most common reasons that vaporizers blink are described below, along with tips for resolving them.
Why is my vape flashing red and not working?
Vape Pen Blinking Red? Time to Recharge. If you're drawing on your vape, and you see a blinking red light, that means it's time for you to recharge your battery. It's important to charge with the proper voltage designed for your vape battery.
Why is my vape blinking blue and not hitting?
Whatever, the point is you need to recharge your vape pen. Sometimes due to low voltage, the pen battery can not charge properly. You may see that the charge is full, but the indicator light is flashing when you go to puff.
Why is my vape pen blinking red white and blue?
This is often caused by a loose battery. If the battery is not screwed in properly, it won't be able to fully charge and the indicator light will continue to blink. To fix this issue, unscrew the battery and re-screw it back in to make sure everything is firmly connected.
Why is my vape just flashing?
If your battery flashes 15 times, it means your e-cig is being over-used and that you should take a break. If your battery flashes 30 times, it needs to be recharged. If your battery flashes continually, it's an indication of a problem with the battery's performance. To fix the issue, try cleaning the battery first.
Why is my vape flashing 3 times and not working?
Battery LED flashes 3 times Certain batteries will flash 3 times to indicate a short circuit. Most standard e-cig batteries will have what's called short circuit protection, so when there is a short and you press the fire button it will just blink 3 times and then won't do anything.
How do you fix a short circuit on a vape?
Here are a few things to try to resolve atomizer short:Make sure the batteries are charging them properly by putting them in a separate charger.If using an RDA/RTA, check and see if the coil is touching the cap or deck.See if there are any breaks in the coil.Ensure that the coil is fully screwed into the tank.More items...•
Why does my pen blink when I try to hit it?
If the issue is a leak, turn off your battery and take a Q-tip dipped in rubbing alcohol and clean where the battery and cartridge meet. Make sure to dry them before screwing them back together. Another reason your battery may be flashing is because it may be dead and needs to be charged.
Why is my vape not working?
There are several reasons why your vape pen may not be working properly. Some of these causes are easy fixes, such as oil setting and getting stuck in your cartridge. Others are more technical, like a battery, atomizer or coil issue. Most of the time, your vape pen isn't actually broken.
How do you fix a vape that won't smoke?
Check your tank to make sure you have enough e-liquid. If your tank is completely full but you still have weak vapor, it is possible that your atomizer or coil has been flooded. If this happens, simply take your atomizer apart and clean it with a paper towel or gently blow through it to get the excess liquid out.
Why is my vape flashing blue?
Blue: Also known as, the dab mode, the blue light will come on when you are vaping at 3.8 volts. You should only vape at this voltage when you are vaping extracts with a 510-thread wax atomizer. To avoid damage, only use cartridges that can take the setting.
How do I get my vape to work again?
Break Air Bubbles. If you have a pod-based disposable vape, you might get weak hits if air bubbles form around the pod's wicks. Tap the device gently on a table to break the air bubbles. After giving the wicks a few seconds to get wet, you should get some nice hits again.
What is the LED Light for?
You may want to know that the LED light behind your vape’s fire button is used by most manufacturers to give you any warnings or signals that could interfere with your vaping experience, especially if the device doesn’t have a digital display.
Why does my vape pen blink?
8 Reasons Why Vape Pens Blink. 1. Low or Dying Battery. The most common reason for a flashing light on your vape pen is to indicate that your battery is running low. When there is not enough power coming from the battery, your vape will give a blinking light (a red light with some devices) to let you know it needs to be charged.
What happens if your 510 pin is stuck?
If the 510 pin has dropped or become stuck in the ‘On’ position, your vape won’t fire and will most likely give you a flashing light. If the staff at your local vape shop don’t do repairs, it might be time for a new mod.
Why do you have to lock the fire button on a vape?
Some devices on the market allow you to lock the fire button to prevent your vape from accidentally firing while it’s in your pocket or bag.
What happens if you screw a battery mod on too tight?
If your tank has been screwed on too tightly or not tightly enough, it won’t make a connection and will give you a warning, usually in the form of a flashing light.
What happens if you drop a vape?
If at any point your vape has been dropped, the impact may have dislodged some of the smaller components inside your device . The more common of these is the connection between the battery mod and the tank: the 510 pin.
Why is my vape not connecting?
In some cases, the only issue is that your vape needs a quick clean and re-assembling. If any liquid has gotten on the connectors, or any of the threading is skew, it might be stopping your device from making a proper connection.
What does it mean when your vape pen blinks red?
When you pressing power button 3 times continuously, the indicator light blinking red it indicates that the vape pen switches to low mode power output.
Why won't my vape pen hit?
If you find your vape pen won't hit, the reasons and suggestions are as follows: Low battery, charge your vape pen. Remember to press the power button (if your vape pen has) when you are vaping. Loose battery, if your vape pen battery is not built-in, unscrew the battery and re-screw it back in.
How long does it take for a vape pen to shut off?
Vaping over 8 seconds at one time, the vape pen will automatically shut off.
When you are charging, does it indicate that you have completed your charge?
When you are charging, it indicates charge completed.
What is a smok starter kit?
The SMOK ProColor Starter Kit is another SMOK brand option with the trademark use of innovative LED lighting features, largely as a fun addition to your vaping experience. As you might guess from the name, the ProColor offers a range of color options – 12 to be exact – that you can choose for your device’s LED lighting. If you have noticed the LED lights turning on or off, cycling, or simply in a different color than you initially chose, you may have inadvertently changed the setting. Your first step should be to check the LED feature. If you aren’t able to resolve it with that approach, consult the user manual for next steps.
Why is my vape not charging?
Reason #1: A Loose Battery. Sometimes, the battery connection in your vape isn’t sufficient. This is often caused by a loose battery. If the battery is not screwed in properly, it won’t be able to fully charge and the indicator light will continue to blink.
Why does the Penguin SE special edition blink?
The Penguin SE Special Edition has an indicator light that will blink to communicate low battery life, like many other vape devices. Try charging your device to see if that resolves the issue.
What does the battery indicator light on a Pico 75W do?
The iStick Pico 75W Starter Kit from Eleaf has a battery indicator light that will blink when the battery reaches a power level of 10 percent or less. If your indicator light is blinking, your first option is to attempt to recharge the device and see if that resolves the issue.
What happens if your battery is too low?
If your battery reads too low, the device will blink red and shut down.
Why does my Air 2 flash red?
The Air 2 uses red flashing lights to show you that your battery has been discharged and needs immediate attention. It will also blink rapidly if it detects a short circuit condition.
What are the OLED indicators on a vape?
Thanks to the lean design of most vape mods, vaporizer manufacturers use OLED indicators to send a variety of signals to the user. Oftentimes these warnings come in the form of blinking lights of different colors.
Christie
what does it mean when you have a fully charged battery ,put on your new pro tank 2 and the button flashes like its a dead battery ?
kerk
My fully charged Vision spinner did that the other day when I put my Evod on. Freaked me temporarily. Took it off and put it back on and it was fine. Go figure.
Christie
My fully charged Vision spinner did that the other day when I put my Evod on. Freaked me temporarily. Took it off and put it back on and it was fine. Go figure.
jsieerr
Ok so i came across this forum because i had the same issue w my EVOD battery and Cloupor tank. It would flash like it was dead when i put the tank on but i realized it was because of how tight you twist the tank on.
Earthling789
Your new KPT2 probably was using a coil that came with it? Chances are, the coil's bottom connection is loose, or you have one of the coil's wires sticking out too far, which is making contact with the negative terminal (outer edge of the 510 connection, the threaded part)... or the coil is shorted-out internally.
cesar
Those tanks seems to have that problem sometimes, specially when you change the coil..I had a similar problem few times, with my Aerotank and recently with the Iclear30. Unscrewing and screwing the coil again fixes that problem for me.
cesar
Aren't you Especial...Specially when you can't even correct English properly.
How to tell if battery is dead?
That's usually an indicator that the battery is dead, there's a short, or just that the center pin on the battery needs to be pulled up. You can use a toothpick or something similar to gently pry the pin up.
What are the anti-vaping articles?
The more anti vaping articles references all the toxic chemicals that are released when vaping and that will basically tear up and destroy your lungs and will cause cancer. These anti vaping articles are so easy to spot as the write makes it clear straight off the bat that they hold an anti vaping stance.