The Ultimate Vape Coil Wire Guide
- KANTHAL. Kanthal coil wire is the most common coil wire material found in vaping. The reason behind this, is that it is...
- STAINLESS STEEL. Stainless Steel coil wire, often shortened to ‘SS’, is a versatile material for vape coils. It is the...
- NICKEL. Nickel coil wire or NI200, is a firm favourite amongst experienced vapers and is used...
How to put a coil in a vape?
Replaceable coils
- Soak your vape coil in ethanol, vinegar, or other cleaning agents for a couple of hours
- Rinse it with running tap water
- Rinse it again, but with distilled water
- Expose the open side of the coil with air to force the water out
- Let it dry until all droplets have evaporated
How to build your own vape coils?
What Is The Best Wire For Building Coils?
- Clapton: a round wire which is wrapped with a higher gauge wire
- Fused Clapton: a Clapton but with more than one core
- Staggered Fused Clapton: this is two spaced Claptons held together with another wrap
- Staple Coil: up to 10 ribbon wires stacked together before being wrapped with a higher gauge
- Tiger Wire: a round wire which is twisted with ribbon wire
How to tell if vape coil is bad?
The Simple Rinse:
- Fill a bowl with warm water.
- Detach tank from mod.
- Dispose of any e-liquid remaining in the tank.
- Completely disassemble your tank.
- Place tank components into bowl.
- Wash tank components in water until clean. …
- Dry off each component with a paper towel.
- Let stand and air dry for 10-15 minutes.
How much is a coil for a vape?
Vaporesso GTi Mesh Replacement Coils (5x Pack) $15.99 $13.59 Select options OXVA UniPlus Replacement Coils (5x Pack) $14.99 $11.99 Select options Advken DC Series Replacement Coils (5x Pack) $13.99 Select options VooPoo ITO Replacement Coils $12.99 $11.99 Select options Jellybox Nano Coils (3x Pack) - Rincoe $8.99 $6.75 Select options
What type of wire is used in vape coils?
Kanthal, stainless steel, nichrome, nickel and titanium are the five types of vape wire used for coil building. Nickel and titanium are considered more advanced types of wire and are only usable in temperature control mode.
What gauge wire is best for vaping?
Typically coil wire is somewhere between 22 and 32 gauge. Resistance, measured in Ohms is equally important. As the size of your wire goes up, the wire's resistance decreases. Therefore, a thinner wire with a 30 gauge will have more resistance but will also heat up quicker than a 22 gauge wire.
Can you use copper wire for vape coils?
Never use copper wire for vaping, especially with a mechanical mod. The resistance of copper wire is low and may be dangerous.
What is the safest wire for vaping?
Stainless steel is the most unique of the common vaping wires. It can pull double duty and be used for straight wattage vaping or temp control vaping. Stainless steel wire is an alloy composed primarily of chromium, nickel, and carbon.
What is the best wire for flavor?
Best Vape Wires Reviewed: Keeping Flavor, Build and Clouds in MindProduct NameBest ForTEMCo 28g Kanthal A1 WireGood flavorMaster of Clouds 22g Kanthal A1 WireGood flavorMaster of Clouds 26g Stainless Steel WireExcellent flavorPure Atomist 28g Stainless Steel WireExcellent flavor1 more row•Dec 6, 2016
How do you make a homemade vape coil?
0:1411:11COIL BUILDING 101 - HOW TO MAKE VAPE COILS FOR BEGINNERSYouTubeStart of suggested clipEnd of suggested clipThis is the vape shears highly recommend them you're gonna need some ceramic tweezers a quailing jigMoreThis is the vape shears highly recommend them you're gonna need some ceramic tweezers a quailing jig or rod. You're gonna need some wire this is a simple round wire.
What is coil wire?
Coils provide the magnetic field of motors, transformers, and generators, and are used in the manufacturing of loudspeakers and microphones. The shape and dimension of the wire used in a coil winding are designed to fulfill a specific purpose.
How do you make a coil out of copper wire?
0:001:29How to easily coil copper wire - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe first thing we did was drill a hole in the dowel rod and stick the wire through the hole. ThisMoreThe first thing we did was drill a hole in the dowel rod and stick the wire through the hole. This helped create a starting point for the wire to start coiling help to keep the wire tight as well.
What is the best wire for vaping?
Stainless Steel Wire. Stainless steel is relatively inexpensive, and the only double-duty vape wire option available (meaning it can be used for both temperature control and wattage mode). This makes it the perfect wire choice for vapers who use both mode options.
What gauge wire do I use for vaping?
Simply put, a wire gauge refers to the diameter of the wire. Typically, a vaper will use one of the following wire gauges - 22, 24, 26, 28, 30, or 32. The larger the number of the wire gauge, the thinner the wire will be.
What is Ni200 wire?
The majority of online retailers tend to offer some form of NiChrome wire. Nickel Wire. Nickel wire is commonly known as Ni200 (or pure nickel) and creates some of the best flavorings you can find in vaping.
What is a Nichrome wire?
NiChrome Wire. NiChrome is recommended for those vaping using the wattage mode. It is a popular choice among advanced build vapers because NiChrome requires very little time to heat up, it holds it is shape well, and is very easy to work with.
What is Kanthal wire?
Kanthal is the wire that started everything. It is the most commonly used vaping wire for over a decade. It is preferred by amateurs and industry professionals alike and is recognized as an extremely affordable, high-quality vape wire that works only with wattage mode.
How to have a successful vaping session?
In order to have a successful vaping session, you need to choose a wire that will not only behave in the manner you are looking for but one that will also work with the specific mode of vaping you (and your device) uses.
What to consider when picking out a vaping wire?
There are two main areas you need to consider when picking out a vaping wire - the size and the material of the wire. These two components can determine not only whether or not it will work within your device, but can also alter the flavor, the time it takes to heat up, and the overall production of vapor (or vape clouds). ...
What is the cheapest wire for vaping?
The workhorse of the vaping world, Kanthal wire is the cheapest to produce and delivers the best cost to performance ratio of any material on the market. Don’t be fooled by the affordable price though, because this wire definitely gets the job done.
Why do you need TI wire?
The reason being, TI wire heats up fast, and cools down quickly which is crucial when testing a new coil build. Waiting for other coil wires to cool down is annoying and time consuming. Most advanced vapers will agree that Titanium coils generate the best flavor out of any other coils on the market. But this is an advanced material that should only ...
Which wire has the fastest firing speed?
Nickel wire coils have, hands down, the fastest firing speed out of any wire material. Nickel is one of the few metals that has zero resistance, making it extremely sensitive to electrical charges.
What wire to use for wattage mode?
Stainless Steel. Stainless steel is another popular wire among vapers because it brings out certain crisp flavors in e-juice. Another great thing about this wire is that it can be used on wattage mode and temperature control mode. Most mods, specifically newer models, have a feature for both modes.
Which wire heats up faster, NI-200 or NI-200?
NI-200 (Nickel) Earlier it was stated that Nichrome wire heats up faster than Kanthal well Nickel beats both those wires. The downside with Nickel wire and that is that it has zero resistance, which makes it sensitive when it is being heated.
What to do before buying wires?
Before you purchase wires make sure to do as much research as possible to ensure you are building the wire properly and to get the best out of your building experience.
What is the most fun thing about vaping?
One of the most fun aspects of vaping is building on a rebuildable atomizer. Most beginners tend to start vaping with tanks, but once you become comfortable with vaping you may want to move up to rebuildable atomizers like RDAs or RTAs. Being able to build has many benefits including customizing builds for bigger clouds, and more flavor.
Is Kanthal wire good for building?
Although the cost of Kanthal wire is low, it really gets the job done. The best things about building with Kanthal wire is its elasticity and durability. The elasticity makes it easier to twist and braid the wire, and since it is durable you wont have to replace coils often. The downside with Kanthal is that most people consider it the dullest ...
Is titanium wire dangerous?
There are some safety hazards with titanium wire, and some local shops wont even sell the wire due to liability and safety issues. Vaping360s, An easy guide for learning the basics of vape wires, states that the controversy surrounding this wire is that it can release a toxic component known as titanium dioxide.
What is a vape coil?
Vape coils are specifically designed to be fitted into your vape tank or rebuildable atomiser. Coils mostly consist of a wrapped piece of metal wire and a cotton wick. The wick soaks up e-liquid, that the coil heats to the point it turns into vapour.
What is a titanium coil wire?
Titanium coil wire or Ti wire, whilst rare is growing in popularity within the ever-burgeoning vape market. This type of wire can only be used in Temperature Control Mode, which is employed on a number of advanced sub ohm vape devices.
What are mesh coils?
Mesh coils have evolved into one of the most popular choices in vaping, for both beginners and experienced users alike. These coils are usually constructed from either Stainless Steel or Kanthal materials, and are widely available for most devices and RDAs nowadays. Providing a rich source of flavour due to the larger surface area heated, mesh coils replace the regular wire heating element used in standard coils and use metallic mesh instead. This results in faster firing, a longer lifespan and enhanced power efficiency altogether compared to conventional round wire coils.
Why use Kanthal coil wire?
The reason behind this, is that it is cheap to source and easy to use, providing good flavour and cloud production. Kanthal Coil Wire is found in both tank coils and prebuilt coils for rebuildable atomisers.
What is a NI200 coil?
Nickel coil wire or NI200, is a firm favourite amongst experienced vapers and is used primarily in advanced vape devices and kits. Nickel coils can only be used in Temperature Control mode, but are reliable and perform well at high temperatures.
What is SS wire?
STAINLESS STEEL. Stainless Steel coil wire, often shortened to ‘SS’, is a versatile material for vape coils. It is the only kind of coil that can be used in both Variable Wattage Mode and Temperature Control Mode, making it a popular choice, particularly for advanced vapers. Stainless Steel heats up faster than standard Kanthal wire ...
Does stainless steel vape wire heat up faster than Kanthal wire?
Stainless Steel heats up faster than standard Kanthal wire and interferes less with flavour, for what many consider a more satisfactory vaping experience. Features: Compatible with Variable Wattage and Temperature Control Mode. Heats faster than Kanthal. Clean flavour.
What is the best wire for coils?
Kanthal is the cheapest and most popular wire for coil building, and is also rather easy to use in comparison to the others. Even with its price Kanthal is still a capable wire though it is noted that it tends to delve the flavour duller in comparison to the other wires. This wire is much better for those starting out as it’s likely the coil type you’ll end up with in a starter kit.#N#Kanthal is probably the best general material. It’s middling on all fields while generally being quality enough to last without ruining too much flavour. You’ve likely already used it many times.
What is the fastest wire to heat up?
Nickel coil is highly noted as the fastest wire to heat up due to having 0 resistance. Being extremely sensitive to heat is both a positive and a negative for this coil however. The positive is again that it heats up incredibly fast. The negative is that it is capable of heating up to fast and may end up melting. To counter the melting issue it is recommended to use a temperature control mod. This also makes it an excellent option for sub-ohm vaping, should you want to put together your own coils for a sub ohm vape.#N#This coil is great for those who understand what they’re doing with their vape and coils. In particular Ni-200 is good for the extremes of vaping being both temperature control and sub ohm vaping. However when used for more average vaping this makes them slightly worse.
Is NiChrome wire good for vaping?
NiChrome is a more advanced wire to set up due to being relatively easy to coil but not very elastic. Its biggest advantage is that it has a very short ramp up time for heating up the e-liquid. It is sometimes noted to give a clean taste to your vape. This makes it a great option for those who like using their vape for short amounts of time on short notice.
Is stainless steel coil good?
Stainless steel is not very popular, but it is very good at bringing out flavour. The biggest advantage of stainless steel is that it can typically last the longest of any wire. However stainless steel coils are very hard to find and there are very little information on them so make sure you ask an expert about these.
What is the guide to vaping?
Guide To Vaping is the largest online magazine blog that is dedicated to providing a vast selection of helpful and informative articles about the latest vaping news, vapor products, and CBD.
Is nickel wire good for ramp up time?
Nickel wire is an Olympic sprinter when it comes to ramp up time as it has almost zero resistance to electric current. It was previously used with Kanthal or NiChrome as it has a really bad habit of melting if you try to use it at high wattage. However, since temperature control was introduced Ni200 has become a mainstay in many companies pre-built coils as it is effective when used correctly.
Does titanium coil work with Kanthal?
Titanium will ramp up fast and cool down just as quickly which is why many vapers fell in love with it for temperature control. The flavor produced by titanium coils is outstanding and it is almost as easy to work with as Kanthal. As with Ni200 wire, many manufacturers are now turning to Titanium as one of their choices for pre-built temperature control coil systems, especially for those who are thought to have an aversion to those coils.
How to build a vape coil?
Some folks love clouds, especially when vaping e-juices (not so much for concentrates and dry herbs). If you’re one of them, keep in mind the following with regards to your coil: 1 Ramp up airflow – Unlike when building for flavor building a coil to produce big clouds means allowing plenty of airflow. Don’t stuff too much cotton in or you’ll choke off the cloud. 2 Wire gauge – The thicker the gauge of the coil the more surface area and the bigger the clouds. 3 Diameter – You’ll need at least a 3 mm inner diameter on your coil to produce storm clouds.
What kind of steel should I use for coils?
When building coils for flavor, you’re probably going to want to use nickel or 316L stainless steel . But there are other things to keep in mind as well such as:
What is the fastest induction vaporizer?
If you’re looking for an intense and robust dry herb or concentrate vaporizer without the need to mess with having to make or change coils on a regular basis, check out the Loto Legend , the easiest and fastest induction vaporizer.
How big of a coil do you need to make storm clouds?
Wire gauge – The thicker the gauge of the coil the more surface area and the bigger the clouds. Diameter – You’ll need at least a 3 mm inner diameter on your coil to produce storm clouds.
What is a coil used for?
Keep in mind that coils are generally used for e-juices and liquid concentrate ...
What is Kanthal wire?
Kanthal – Kanthal wire is known for being easy to work with. It also tends to hold its shape well, is durable and resists oxidation. In addition, it’s also cheap and plentiful, so it won’t break the wallet. For all these reasons and more you’ll often find Kanthal wire in single coil builds. On the flipside, it doesn’t ramp up as fast as some other wires, and you can’t use it in concert with temperature controls to mediate the flavor and vapor from various materials you use like concentrates, dry herb, flowers, e-juices or waxes.
How do vape coils work?
Coils, which are sometimes referred to as atomisers, are the component of your vaping device that creates vapour.
What are the different types of coil?
MTL or “mouth-to-lung” coils are designed to replicate the experience of smoking a traditional cigarette. This means a tight draw and low power output. Generally, MTL coils are designed to be used with higher nicotine strength e-liquids, to further simulate the “throat hit” of a cigarette.
DuoPrime – a new era for coil design
At Innokin, we’re always looking for ways to improve the vaping experience. As mentioned previously, mesh coils are excellent at increasing e-liquid absorption.
