Vape Coils 101 – The 5 Types of Wire
- Safety First. We will be talking about pre-built coil systems and the wire that you can buy from the vape shop to roll...
- Kanthal. The original vape wire. Whether you are running a mechanical mod or 200 watt regulated box this wire is almost...
- NiChrome. For builders, the next logical step after Kanthal in wattage mode is NiChrome. It...
How to put a coil in a vape?
Replaceable coils
- Soak your vape coil in ethanol, vinegar, or other cleaning agents for a couple of hours
- Rinse it with running tap water
- Rinse it again, but with distilled water
- Expose the open side of the coil with air to force the water out
- Let it dry until all droplets have evaporated
How to build your own vape coils?
What Is The Best Wire For Building Coils?
- Clapton: a round wire which is wrapped with a higher gauge wire
- Fused Clapton: a Clapton but with more than one core
- Staggered Fused Clapton: this is two spaced Claptons held together with another wrap
- Staple Coil: up to 10 ribbon wires stacked together before being wrapped with a higher gauge
- Tiger Wire: a round wire which is twisted with ribbon wire
How to tell if vape coil is bad?
The Simple Rinse:
- Fill a bowl with warm water.
- Detach tank from mod.
- Dispose of any e-liquid remaining in the tank.
- Completely disassemble your tank.
- Place tank components into bowl.
- Wash tank components in water until clean. …
- Dry off each component with a paper towel.
- Let stand and air dry for 10-15 minutes.
How much is a coil for a vape?
Vaporesso GTi Mesh Replacement Coils (5x Pack) $15.99 $13.59 Select options OXVA UniPlus Replacement Coils (5x Pack) $14.99 $11.99 Select options Advken DC Series Replacement Coils (5x Pack) $13.99 Select options VooPoo ITO Replacement Coils $12.99 $11.99 Select options Jellybox Nano Coils (3x Pack) - Rincoe $8.99 $6.75 Select options
What material is a vape coil made of?
Most coils are made from kanthal, but other materials such as nichrome, titanium, stainless steel and nickel are also common.
Is NiChrome wire safe to vape?
NiChrome is a good vape wire, but there are a few caveats to using it. Since it's an alloy of nickel and chromium, it has a really fast ramp-up time – it can heat up really fast, which means that complex coil builds can really benefit from it.
What gauge wires are used for Vapes?
Vapers usually use 22, 24, 26, 28, 30, and 32 gauge wire. The bigger the number of the gauge increases, the thinner the wire gets.
What is the best coil wire for vaping?
Best Wire Type for VapingKanthal – As one of the most widely available types of coil wire, Kanthal is extremely popular. ... Stainless Steel – In contrast to Kanthal, using stainless steel provides a very quick ramp time. ... Titanium – This is one of the least used of the four that we have covered.More items...•
Which is better nichrome or kanthal?
Kanthal has a slightly higher maximum operating temperature as well as a higher melting temperature than Nichrome, giving it a slightly longer lifespan than Nichrome. Some people claim that Kanthal wire puts off a slightly metallic taste due to the Iron composition, whereas others claim it does not.
Is stainless steel wire safe for vaping?
Stainless steel is the most unique of the common vaping wires. It can pull double duty and be used for straight wattage vaping or temp control vaping.
How do you make coil wire for vape?
6:4411:11COIL BUILDING 101 - HOW TO MAKE VAPE COILS FOR BEGINNERSYouTubeStart of suggested clipEnd of suggested clipThe fibers of the cotton are flowing. Okay. So this one you want to eyeball it maybe say rightMoreThe fibers of the cotton are flowing. Okay. So this one you want to eyeball it maybe say right around there you cut it right cut yourself a nice strip. Just like that then you want to take this strip.
What is AWG coil?
American Wire Gauge (AWG) is the standard way to denote wire size in North America. In AWG, the larger the number, the smaller the wire diameter and thickness. The largest standard size is 0000 AWG, and 40 AWG is the smallest standard size.
Which is better kanthal or stainless steel?
Compared to kanthal, stainless steel has a slightly lower resistance and a slightly faster ramp-up time for a given wire gauge. Unlike some of the other non-kanthal coil materials, people generally find that stainless steel doesn't introduce any off flavors that require getting used to.
Can you use copper wire for vape coils?
Never use copper wire for vaping, especially with a mechanical mod. The resistance of copper wire is low and may be dangerous.
What is Kanthal wire made of?
ferritic iron-chromium-aluminium alloyKanthal® A-1 is a ferritic iron-chromium-aluminium alloy (FeCrAl alloy) for use at temperatures up to 1400°C (2550°F). The alloy is characterized by high resistivity and very good oxidation resistance.
What has Nichrome wire in it?
Nichrome wires are certainly incredibly resistant to electricity. Furthermore, it is significantly useful as a heating element. Because of this, it has massive usage in commercial products and home tools. Moreover, hairdryers, ovens, storage heaters, and toasters use nichrome wire coils.
What is the best wire for vaping?
Stainless Steel Wire. Stainless steel is relatively inexpensive, and the only double-duty vape wire option available (meaning it can be used for both temperature control and wattage mode). This makes it the perfect wire choice for vapers who use both mode options.
What gauge wire do I use for vaping?
Simply put, a wire gauge refers to the diameter of the wire. Typically, a vaper will use one of the following wire gauges - 22, 24, 26, 28, 30, or 32. The larger the number of the wire gauge, the thinner the wire will be.
What is Ni200 wire?
The majority of online retailers tend to offer some form of NiChrome wire. Nickel Wire. Nickel wire is commonly known as Ni200 (or pure nickel) and creates some of the best flavorings you can find in vaping.
What is a Nichrome wire?
NiChrome Wire. NiChrome is recommended for those vaping using the wattage mode. It is a popular choice among advanced build vapers because NiChrome requires very little time to heat up, it holds it is shape well, and is very easy to work with.
What is Kanthal wire?
Kanthal is the wire that started everything. It is the most commonly used vaping wire for over a decade. It is preferred by amateurs and industry professionals alike and is recognized as an extremely affordable, high-quality vape wire that works only with wattage mode.
How to have a successful vaping session?
In order to have a successful vaping session, you need to choose a wire that will not only behave in the manner you are looking for but one that will also work with the specific mode of vaping you (and your device) uses.
What to consider when picking out a vaping wire?
There are two main areas you need to consider when picking out a vaping wire - the size and the material of the wire. These two components can determine not only whether or not it will work within your device, but can also alter the flavor, the time it takes to heat up, and the overall production of vapor (or vape clouds). ...
What is the guide to vaping?
Guide To Vaping is the largest online magazine blog that is dedicated to providing a vast selection of helpful and informative articles about the latest vaping news, vapor products, and CBD.
Is nickel wire good for ramp up time?
Nickel wire is an Olympic sprinter when it comes to ramp up time as it has almost zero resistance to electric current. It was previously used with Kanthal or NiChrome as it has a really bad habit of melting if you try to use it at high wattage. However, since temperature control was introduced Ni200 has become a mainstay in many companies pre-built coils as it is effective when used correctly.
Does titanium coil work with Kanthal?
Titanium will ramp up fast and cool down just as quickly which is why many vapers fell in love with it for temperature control. The flavor produced by titanium coils is outstanding and it is almost as easy to work with as Kanthal. As with Ni200 wire, many manufacturers are now turning to Titanium as one of their choices for pre-built temperature control coil systems, especially for those who are thought to have an aversion to those coils.
What is the best wire for coils?
Kanthal is the cheapest and most popular wire for coil building, and is also rather easy to use in comparison to the others. Even with its price Kanthal is still a capable wire though it is noted that it tends to delve the flavour duller in comparison to the other wires. This wire is much better for those starting out as it’s likely the coil type you’ll end up with in a starter kit.#N#Kanthal is probably the best general material. It’s middling on all fields while generally being quality enough to last without ruining too much flavour. You’ve likely already used it many times.
What is the fastest wire to heat up?
Nickel coil is highly noted as the fastest wire to heat up due to having 0 resistance. Being extremely sensitive to heat is both a positive and a negative for this coil however. The positive is again that it heats up incredibly fast. The negative is that it is capable of heating up to fast and may end up melting. To counter the melting issue it is recommended to use a temperature control mod. This also makes it an excellent option for sub-ohm vaping, should you want to put together your own coils for a sub ohm vape.#N#This coil is great for those who understand what they’re doing with their vape and coils. In particular Ni-200 is good for the extremes of vaping being both temperature control and sub ohm vaping. However when used for more average vaping this makes them slightly worse.
Is NiChrome wire good for vaping?
NiChrome is a more advanced wire to set up due to being relatively easy to coil but not very elastic. Its biggest advantage is that it has a very short ramp up time for heating up the e-liquid. It is sometimes noted to give a clean taste to your vape. This makes it a great option for those who like using their vape for short amounts of time on short notice.
Is stainless steel coil good?
Stainless steel is not very popular, but it is very good at bringing out flavour. The biggest advantage of stainless steel is that it can typically last the longest of any wire. However stainless steel coils are very hard to find and there are very little information on them so make sure you ask an expert about these.
What are the different types of vape wires?
Types of Vape Wires. Shutterstock / Hurricanehank. There are five different types of vape wires generally used: Kanthal Wire (FeCrAl) NiChrome. Stainless Steel. Nickel. Titanium. As you can tell, only one vape wire is versatile enough to be used in both vaping modes, and that’s Stainless Steel.
What is the ultimate guide to vape coils?
The Ultimate Guide to Vape Wires and Vape Coils. You won’t be tapping in the dark like so many other beginner builders, and your first coil will be right as rain and ready to fire. At one point or another, a serious vaper will try a hand at building their coils – out of economic reasons, engineering prowess, or just pure fun.
What gauge is used for vaping?
When talking about vape wire size, vapers are referring to gauge, the actual wire diameter. The most popular gauges that vapers use are 32, 30, 28, 26, 24, and 22 – a majority of vape coils, even the most eccentric ones and used in the best vapes, can be built with these. The important thing to remember here is that the bigger ...
What are the two modes of vaping?
You know by now that there are two different modes of vaping – the wattage mode and the temperature control mode . Of course, it would be great if we could just use any old vape wire type for both of these modes.
What is the best wire for vaping?
Stainless Steel Wire. The only vape wire that can pull double duty (work in both wattage and TC modes) is the stainless steel wire. It’s perfect for vapers that haven’t made up their mind between TC and wattage mode or fail to check the modes they’re firing in regularly.
What is NiChrome wire?
Another fan-favorite for wattage vaping, NiChrome, is an alloy composed of nickel and chromium. If you’re looking for fast ramp-up time, this is the wire you should look into. Other than that, it behaves similar to Kanthal wire – it’s easy to work with (slightly less spring than Kanthal wire) and holds shape well.
What is SS wire?
Stainless steel wire comes in various grades (410, 413, 316, 316L, 430, 304, and so on), which adds to the confusion a bit and makes it seem as if various vapers are either singing praises or talking down the same type of wire. Some grades of SS wire contain almost no nickel (SS is an alloy composed of various parts of chromium, nickel, ...
How do vape coils work?
Coils, which are sometimes referred to as atomisers, are the component of your vaping device that creates vapour.
What are the different types of coil?
MTL or “mouth-to-lung” coils are designed to replicate the experience of smoking a traditional cigarette. This means a tight draw and low power output. Generally, MTL coils are designed to be used with higher nicotine strength e-liquids, to further simulate the “throat hit” of a cigarette.
DuoPrime – a new era for coil design
At Innokin, we’re always looking for ways to improve the vaping experience. As mentioned previously, mesh coils are excellent at increasing e-liquid absorption.
Top Vaping Wire for Building Vape Coils
Fortunately, we've taken care of the hard work for you. By trying all the most popular brands, our selection has been narrowed down to only the top products, making decisions easier.
Atomic Wire - Ohm Run Hitters
Atomic Wire Looks like any other vaping wire on the market. However, once it is inside your vape, the differences couldn't be any easier to notice. Other wiring brands haven't been nearly as durable, especially when heated frequently. Vapers often run through shoddy materials rather quickly, but these seemed as if they lasted forever.
Aspire Mini Triton Clapton Coil 5 Pack
Built for the Triton vape, the Aspire coils are a force to be reckoned with. Not only are they reliable, but they are also available with multiple wiring options. Nickel sounds like it's somewhere in the middle, neither too resistive nor conductive. You could also choose to work with some Kanthal wiring.
Smok V8-Baby Q2 Dual Core Replacement Coils (5 Pack)
Smok's coils are still some of our favorites, on account of how tasty they make each hit. The V8-Baby Q2s are from another planet, so to speak. Most coils, in today's market, are only meant to use a single wire. These, on the other hand, happened to take advantage of two of them. They are dual-coil-style coils.
Vaporesso C-Cell Coil 5 Pack
Vaporesso has been so great at meeting customer demands they've built their reputation on it. Other manufacturers stick to the same, tired and boring, concepts. Innovation hasn't been as common as it had been years ago. Yet, they've managed to break that trend, thanks to these unique coils.
KA1 100 Foot 22 Gauge Wire Spool - Demon Killer
For those who would prefer building their own vapes, this wire offers more than enough material to build several coils. As such, you'd only need to purchase a single spool for most purposes. 100 feet of wire could build dozens of functioning coils, each performing optimally.
Ni90 Comp. Wire - Mad Bomber Wire
Nickel still reigns supreme when it comes to coil-building. Other materials simply don't match nickel's unique characteristics. Fortunately, we've got plenty of options, so finding something perfect isn't a problem. Durable and conductive, coils built of this should meet even the most stringent expectations.
What is coilology vape wire?
Coilology. Coilology have vape wire down to a science and they’ve got one of the biggest varieties of vape wire style. The flavor from their wire is superb, it’s durability is excellent and it’s as easy as it gets to build with.
What is the easiest vape wire to build?
Vandy Vape wire is some of the easiest vape wire to build with. It’s effortless to shape and make coils with because it bends easily and stays in the shape that you build it to. Vandy Vape wire is super clean and it heats up evenly so the flavor that you get from your ejuice is always pure.
What is Ni80 wire?
Ni80 is an 80% chromium and 20% nickel alloy. Ni80 is less common than kanthal or stainless steel wire but it’s recently been seeing increased use for its clean flavor and fast ramp up times. It’s also easy to work with and holds its shape nicely. Nichrome contains a lot of nickel and so it’s prone to melting if you aren’t careful, but as long as you pulse your ni80 coils slowly and at a low temperature you won’t have an issue. Ni80 can only be used in wattage mode.
What is stainless steel wire?
Stainless steel wire is a chromium, nickel and carbon alloy. It’s unique among vape wires because it’s the only wire that can be used with both wattage and temperature control mode. Stainless steel wire comes in a variety of grades but SS316L is medical and food grade and thus the most popular type used for vaping.
How much is coil master wire?
Coil Master is not only one of the best brands of vape wire that you can get but it’s also one of the cheapest. You can get a 30ft roll of kanthal wire for $5.50 which equals out to just about $0.18 per foot. But just because it’s cheap doesn’t mean it’s any less good.
Why is Kanthal wire used for vaping?
It’s the most common vape wire used for building because it’s inexpensive, widely available and resistant to oxidation. Kanthal has a slower ramp up time than stainless steel or ni80 wire and it’s arguably less flavorful than other types of vape wire.
What is twisted wire vape?
Twisted Wire: Twisted wire is exactly what it sounds like. It’s two or more pieces of wire that have been twisted together to form one strand.