What wattage do you vape your RBA coils?
Yout rx should tell you what it reads the coils at, just make sure you eliminate hot spots and have the terminals on tight. I've never had a ton of luck on the rba but when I use it I vape around 60 watts or so I've had the tfv8 original for ages now.
What wattage is best for vaping?
The best wattage for vaping depends on two things: Your own personal tastes (do you want a hot or warm vape?) However, if you go too high for the coil you’re using, it will burn out rapidly and start tasting like ass – the cotton just burns up which is why you get a burnt taste from your vape. Start Low.
What's the difference between RDA and tfv8?
The rda will have a different pin (one with a hole) = no more dripping just lazy squeeze the bottle to add more juice I've had the tfv8 original for ages now. And just wicked the coils. After watching YT videos I believe they read about 0.28 to 0.29.
What does the wattage of a box mod mean?
The wattage of a box mod, in layman’s terms, is essentially the amount of power you send from the mod’s battery to the atomizer (AKA your vape tank). Higher wattages equal more power, and this, in turn, creates a hotter, more intense hit. And more vapor. If you want those BIG clouds, you gotta run your vape mod at higher wattages.
How do you use a Smok RBA coil?
4:176:12How To Wick The RPM RBA Coil For The SMOK RPM40 Tutorial - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo on the next screen we're gonna see how much clouds we could blow with this bad boy so the coldMoreSo on the next screen we're gonna see how much clouds we could blow with this bad boy so the cold RBA coils inside the pod. It's in the device. Now let's test out the clouds. And flavor.
How do you prime a RBA coil?
6:097:58SMOK TFV8 RBA TUTORIAL | How To Build/Wick The Included CoilYouTubeStart of suggested clipEnd of suggested clipAll you're going to do is screw the top of the RBA coil onto that base.MoreAll you're going to do is screw the top of the RBA coil onto that base.
How long do Smok TFV8 coils last?
1-2 weeksCoils are available in packs of 3. Changing your coil regularly is the best way to keep the flavour in your device fresh. VapeMeet recommends changing your coil every 1-2 weeks.
What wattage should I vape RTA?
Often, regardless of the type of tank, the best performance of the majority of vapes occurs between 80 and 100 watts. Higher wattages will render your coil “useless” – burn out and reduce the battery life.
Is priming a coil necessary?
Priming your coil basically means ensuring it is thoroughly soaked with e-liquid before you start to vape. The process of priming is intended to prevent “dry hits” when you first install a new coil, and for this reason it's only really necessary when you're using a brand new coil.
How long should you prime a new coil?
How Long Should You Prime a Vape Coil For? It's always recommended to leave your coil to prime for as long as possible - anywhere between 5-30 minutes. The longer you leave it the better, but most coils should be ready to vape after around 5-10 minutes.
Why does my SMOK coil burn out so fast?
You're Not Priming New Coils When You Install Them Coil gunk is the most common reason why vape coils burn out, and that's a good thing because it's completely fixable through cleaning – there's no real damage to the coil.
Can I rinse my vape coil with water?
Here is how you should clean your replaceable coils: Let your coil soak in ethanol, vinegar, or cheap vodka for at least a couple of hours. Place it under the tap and rinse. Rinse once more with some distilled water.
Which SMOK coil is best for flavor?
SMOK suggests the best for excellent flavour and vapor is the RPM Triple coil 0.6ohm, at 25W.
What wattage gives the best flavor?
The sweet spot for getting a balance of vapour and flavour is around 0.3ohms. Depending on your coil choice you'll want to up the wattage from anywhere between 50 and 100 watts. Clapton and Alien coils usually take a bit more power to ramp up so you'll want to boost the wattage if you're using either of these options.
What wattage should I vape at 0.6 ohm?
12-25 wattsIn contrast, the 0.6ohm coils have a recommended wattage of 12-25 watts. They are therefore classed as restricted direct to lung (RDL) coils, offering less clouds but conserving your battery and e juice.
What wattage should I vape at 0.5 ohm?
For example, a 0.5 ohm coil will vape best at 15 watts up to 50 watts. Another place you can look to find out the appropriate wattage range is on the coil itself.
Ajsin11950 Full Member
Just had one quick question- Anyone here use the RBA that comes with the TFV8 tank? I love the TFV8 tank but man I'm getting killed buying the stock coils. I'm going through like 30ml of juice in 1-1/2 - 2-1/2 days and I swear not long after that I'm getting some not so good tastes until I change the coil..
Ajsin11950 Full Member
Now I don't want to ask a silly question but isn't that akin to going out and purchasing a 12 cylinder Lamborghini formula one racer and then complaining it's using too much gas? They don't call that atty the Cloud Beast for nothing and big clouds take lots of juice.
Grego25 Senior Member ECF Veteran
I have the tf rta which is similar to your tank but only has the rba deck. I have been using it about 2 months and just rewicked a couple days ago. I didn't really need to but was changing flavors & wanted to address a minor leak. It takes maybe a nickel worth of cotton.
NealBJr Ultra Member ECF Veteran
Just had one quick question- Anyone here use the RBA that comes with the TFV8 tank? I love the TFV8 tank but man I'm getting killed buying the stock coils. I'm going through like 30ml of juice in 1-1/2 - 2-1/2 days and I swear not long after that I'm getting some not so good tastes until I change the coil..
BrotherBob ECF Guru ECF Veteran
Could try watching a few good Youtube vids. You could google "Youtube vape: coil builds" . Nothing like watching it being done if reading about it doesn't sink in.
Cheallaigh Ultra Member
I love my ohm meter... there's a reason I use it, I only have one or two mods now around me at any given time (hubby keeps stealing the others to take to work, he's taking 3 with him next week for hunting)) and the mech doesn't tell me anything lol. I can test, burn, clean, build etc one... and charge a spare battery at the same time.
Ajsin11950 Full Member
Thanks for all the replies, I need to change my coil again now, lol.. I'm going to try the rba one now (its either that or run up to the store to buy more coils).. I did watch a few videos, doesn't seem like too big a deal. I'll let yas know how I make out, thanks
What is the wattage of a box mod?
The wattage of a box mod, in layman’s terms, is essentially the amount of power you send from the mod’s battery to the atomizer (AKA your vape tank). Higher wattages equal more power, and this, in turn, creates a hotter, more intense hit. And more vapor. If you want those BIG clouds, you gotta run your vape mod at higher wattages.
Can you control the temperature of a box mod?
But Temperature Control vaping is a very useful feature of a box mod, as it allows you to control the maximum temperature that the atomizer will fire at. You can set it wherever you like, for instance, if you’re vaping sweeter E Juice, you could set it nice and low, to really juice-out the flavors.
Do vape mods have a user interface?
Most modern vape mods run on a vape chip and software, just like a smartphone. Vape mods also have a user interface, buttons, and a display . In fact, they’re probably closer to a mobile phone than a cigarette in this respect. Please though, DO NOT be put off by ALL the settings and bells and whistles inside your box mod.