The Baby Beast comes with two coils: The T8 (.15 ohm octo-coil) and the Q2 (.4 ohm dual core). The Q2 is the coil that comes pre-installed on the tank. The Q2 coil allows for slightly more airflow than the T8. The Q2 is rated from 20-50 watts with 30-40 watts being the recommended setting.
Full Answer
How much wattage do I need for my vape tank?
1 Start Low. Even If Your Tank Says It Can Handle 150W, Start At 60W And Work Your Way Up 2 Higher Wattage Does Not Mean Better Vaping. I’d Rather Vape At 60W And Conserve My Coil Heads 3 Most Modern Sub Ohm Tanks Will Not Require More Than 80W – Even The High-Power Ones.
What type of vape tank is best for You?
All vape tanks have a performance curve, an area where they’ll perform best. Most modern sub-ohm tanks are rated for high wattage performance, however, I find it is best for the longevity of the coils to stick well below the advertised maximum output. Sub-Ohm tanks are designed to produce more clouds.
What wattage tank should I use for my battery?
Most of the time, regardless of what tank you’re using, performance will likely be best in around 80-100W (tops). Any higher and you’ll burn through E Juice and your battery life too quickly. Plus you’ll reduce the lifecycle of the coil.
Do sub ohm vape tanks need more than 80W?
Most Modern Sub Ohm Tanks Will Not Require More Than 80W – Even The High-Power Ones. All vape tanks have a performance curve, an area where they’ll perform best. Most modern sub-ohm tanks are rated for high wattage performance, however, I find it is best for the longevity of the coils to stick well below the advertised maximum output.
Is the Smok baby beast a sub ohm tank?
SMOKTech is proud to introduce the SMOK TFV8 Baby Beast Sub-Ohm tank which is considered to be the smaller version of the original TFV8. The TFV8 Baby Beast is now a slimmer 22mm diameter size and 3.0ml capacity tank.
What tank uses baby beast coils?
Compatible with:Smok Baby Beast.Smok Big Baby Beast.Smok TFV12 Baby Prince.Vaporesso NRG.Vaporesso Cascade (with adapter)Vaporesso Cascade Baby/SE.Vaporesso SKRR/SKRR-S.Geekvape Cerberus.More items...
What coils work with Smok V8?
The SMOK V8 Baby Beast Replacement Coils are powerful cores introduced with the Smok TFV8 Baby Beast Tank. They are compatible with the TFV8 Big Baby Tank and the TFV12 Baby Prince Tank as well. The V8 Baby-M2 is compatible with the SMOK Stick V8, designed for 3.7V output.
Which baby beast coil is best for flavor?
The triple core Baby T6 coil is the highest wattage coil available for the Baby Beast. With a recommended best wattage range of 70 to 90 watts, you get a huge cloud with impressive flavor. If you want to get the most vapor production possible out of your Baby Beast tank, this coil is the way to go.
Which Smok coil is best for flavor?
SMOK suggests the best for excellent flavour and vapor is the RPM Triple coil 0.6ohm, at 25W.
What coils are compatible with TFV8 baby beast?
i.e. SMOK Baby Beast uses TFV8 Baby coils, therefore it is compatible with any other coil in the "small" category. Small coils: Eleaf HW coils [Do not fit 22mm Vaporesso Cascade Baby] E-XY T1 coils.
What wattage is the Smok stick V8 baby?
SMOK Stick V8 SpecificationsSMOK Stick V8Wattage:180 wattsBattery:Dual 18650Coils:0.15ohm, 0.25ohmVoltage Range:3.4-4.2V3 more rows•Mar 19, 2019
What does TFV8 mean?
The TFV8, is the ultimate sub-ohm atomizer. The TFV8 utilizes 4 unique, patented Turbo Engines: V8-T8 (6.6T), V8-T6 (6.0T), V8-Q4 (5.0T), and the V8 RBA (4.0T-X). These add up to make the TFV8, a real Cloud Beast!”
Swaglife81 Full Member
So I got to test out my buddies baby beast the other day on 6mg liquid and I loved the hit. I haven't been vaping to long but started with Aspire Nautilus 2. MTL for a week on 1.8 coils. Started DL on their sub ohm coils but the Nautilus 2 just isn't setup for it. I need to lung hit to be happy.
iVape524 Full Member Verified Member
I run the 0.4 q2 coil at 55 watts and it's a great vape. Here are smoks reccomended wattages on their baby coils
pappcam Super Member ECF Veteran
I run the Q2 and X4 coils at 45 watts and they both are great. Just realize that you'll be going through a lot more juice compared to the Nautilus 2.
SteveS45 Moved On ECF Veteran
I run my Baby Beast with the X4 coils at 25 to 30 watts maximum which delivers great coil life and flavor in my opinion.
Eskie ECF Guru Verified Member ECF Veteran
I run the Q2 and 40W, nice performance. Realize at 40W you won't be getting 4 to 5 days of battery life like you are with the mtl setup.
Swaglife81 Full Member
Thanks for the replies. I waited to do some more research before pulling the trigger. Went to 3 vape shops in my area. It's amazing how big vaping is now. Literally more vape shops than gas stations it seems.
nate77 Full Member
Currently running an X4 at 45 watts on my Pico plenty of vapor, and flavor. Battery life sucks, I barely make it through the work day, and carrying a separate juice bottle is mandatory with the tiny capacity, and massive juice consumption.
bklynt
Just bought the baby beast tank. I wanted to know what setting should I use the coils in and what are they made from? Thanks.
rafael.j.vega.5
why does my baby beast give me a spicy chilly throught hit. Sent from my SAMSUNG-SM-N920A using Tapatalk
Bebop
why does my baby beast give me a spicy chilly throught hit. Sent from my SAMSUNG-SM-N920A using Tapatalk
FXRich
You may want to make sure your air is open far enough, if you don't get enough airflow across the coils they get pretty hot, and burn the cotton. Other than the airflow the only other thing I can think of is you are using too many watts, or you aren't priming the coil well enough.
SmokenBills84
I have a question, I know it isn't about the coil, though I came here to learn something about those, too, and have, but I also have a question about whether or not the babybeast will fit my Wesmec Reuleaux RXmini mod. Any idea if it will fit?
SmokenBills84
Thank you. I hope to see a notable improvement in quality compared to the tank which came with my mini's mod because, though I'm happy with the wesmec Mod, its tank doesn't seem all that great. but maybe it's just me, I'm still pretty new.
leadpipe58
One other reason could be that you need to break in a coil. You prime a new coil with a couple of drops in the coil?