what volts is a smok procolor vape supposed to be on

by Prof. Macey Krajcik Published 2 years ago Updated 1 year ago

Input Voltage: 6.4V – 9.0V. Output Voltage: 0.5V – 9.0V.

How many colors does the smok proColor come in?

Input Voltage: 6.4-9.0V; Working Modes: TC(TI, NI, SS)/VW/Memory; Resistance: 0.1-3.0ohm(VW)/0.06-3.0ohm(TC) Temp Control Range: 100-315℃ / 200-600℉ Standby Current: <500uA; Output Voltage: 0.5-9.0V; Battery: 2PCS High-Rate 18650 Batteries(Sold Separately) Anti-Slip Fire Key; Intuitive 1.3 Inch Colorful OLED Display; 12-Colors LED Light; 6 Colors Screen …

How much power does a vape coil use?

As I mentioned in the beginning of this review, the new SMOK Procolor mod is very similar to the Alien 220W. It’s 85 mm tall, 46 mm wide and 30 mm thick, so basically just 2 mm wider than the older SMOK device, otherwise thy’re pretty much identical. The similarities are also very similar in the general design of the mod.

Is the smok Novo the best pod vape?

SMOK ProColor MOD Specs; Dimensions: 85 * 46 * 29.5 mm; Wattage Range: 6 – 225 W; Temperature Range: 200 - 600°F / 100 - 315°C; Resistance Range: 0.1 - 3.0Ω (VW Mode) 0.06 - 3.0Ω (TC Modes) Input Voltage: 6.4 - 9.0 V; Output Voltage: 0.5 - 9.0 V; Output Modes: VW - TC (Ti| Ni| SS) Memory; Multicolor LED Light Band Border; 12 Color Customization; 5 Light Styles

How many watts can the innokin MPV5 vape?

Nov 16, 2017 · SMOK ProColor – Specs & Features. I could write 500 words about the SMOK ProColor’s specs and features, but for the sake of brevity, this is a LONG review already, I will just paste the key specs and features below. Dimensions: 85x46x29.5mm. Wattage Range: 6W – 225W. Temperature Range: 200°F – 600°F / 100°C – 315°C.

What should my SMOK vape be set at?

For 2-ohm coils, the ideal voltage falls between the ballpark of 3.3 to 4.0 volts. Higher ohm (aka higher resistance) coils allow for a higher voltage.Apr 21, 2022

How do I turn up the voltage on my SMOK?

To change the device's wattage, press the fire button three times quickly. You can then press or hold the fire button to adjust the current power level. When you reach the desired power level, don't touch the fire button for a few seconds.Nov 29, 2020

What is safe voltage for vape?

The industry standard for this cutoff is 3.2 volts. Kanger devices have even higher cutoffs at 3.5 or 3.6 volts. Overcharging: Much like your cellphone, a regulated device cuts off charger current as soon as your battery hits peak voltage (4.2). This doesn't apply if you're using an external charger.Sep 6, 2019

What does volt too low mean on a vape?

Your batteries don't have enough charge to properly fire the coils at the wattage you've selected, so they don't.Nov 15, 2017

How do you power a SMOK vape?

Turning on Your SMOK Vape

First, locate your device's main fire button, which also functions as the power on/off button. ...
Once your device is unlocked, press the main fire button three times to access the device menu. ...
After you've enjoyed a good vape session, turn off your SMOK device by accessing the menu system again.

Jun 14, 2018

How do I reset my SMOK vape?

Reset the tank - You can 'reset' the tank by removing it from the mod, checking the screws are tight and pressing the fire button. Then re-attach your tank and select “n” when you are asked if it is a new coil.Aug 23, 2018

What does 2% mean on a vape?

The amount of nicotine in a vape depends on what nicotine strength you choose. E-liquid strength ranges from zero nicotine, up to 20mg/ml, or 2%. This means there are 20 milligrams of nicotine present in each millilitre of e-liquid.Sep 16, 2021

How do you know what wattage your vape is?

Really, the most useful formulas for vapers, are the three that calculate current (I = V ÷ R) power (P = V x I) and resistance (R = V ÷ I). These will allow you to figure out the current your coil will draw and the wattage that will result. As you increase resistance, current and power will drop off.Sep 20, 2021

What wattage should I vape at 0.3 ohm?

between 50 and 100 watts

The sweet spot for getting a balance of vapour and flavour is around 0.3ohms. Depending on your coil choice you'll want to up the wattage from anywhere between 50 and 100 watts.

What does voltage too low mean?

Low voltage is a designation that indicates that something uses a lower stream of power than a traditional wall socket provides. Usually this means they come with some sort of a transformer or step-down device that reduces the voltage to a much lower level, which in turn means it's much safer to use.Aug 22, 2017

Why is my SMOK not working?

SMOK Vape Won't Turn On

If your SMOK vape isn't turning on, it could be a quick fix: Try charging your mod to see if a dead battery is an issue. Plug it into the charger and hope that you forget to recharge after your last use. Check the battery to confirm that it's properly inserted.Oct 22, 2019

Why does my vape say 0 ohms?

IF ANY COIL READS 0.0 DO NOT USE IT... 0.0 MEANS ZERO OHMS THAT IS A SHORT CIRCUIT, BATTERIES EXPLODE WHEN CONNECTED TO SHORT CIRCUITS!!!!!!!!!!!!Jan 31, 2014

Vape-FAQ.com