what vape mods can kanthal use

Kanthal wire is a ferritic iron-chromium-aluminum alloy with good resistance to oxidation. It is commonly used for vaping in straight wattage mode. Kanthal is a great place to start if you are just getting into rebuilding, dripping, etc.

Full Answer

Is there a way to vape Kanthal in temp mode?

Jan 13, 2018 · Sep 11, 2010. between here and there. Watts or power mod (same thing). TC is only for coils that are made of wires with titanium, nickle, or stainless steel. No need to set anything for kanthal, your mod should already say watts or power when you first open it. Sugar_and_Spice, Jan 13, 2018.

What is a Kanthal wire for vaping?

Silica is great with Kanthal Wire and there are endless possibilities when working with both of these items. Silica builds for Mechanical Vape Mods can generate some amazing clouds of vapor and depending on the type of Rebuildable Atomizer or Rebuildable Dripping Atomizer your are using, great flavor as well. Kanthal Wire and Ekowool

What are the best vape mods for mechanical vape?

Vape Wires: Kanthal, Nichrome, Stainless Steel and More Introduction. Do you know what are the most common types of vaping wire? What about their main uses and characteristics? Kanthal. Kanthal wire is a ferritic iron-chromium-aluminum alloy with good resistance to oxidation. It is commonly used... ...

Why is kanthal used in TC mode?

Dec 11, 2014 · The types of Kanthal wire. There are basically three types of Kanthal wire that are commonly used in the building of micro coils for atomizers: A1, A, and D. A1 is mostly renowned for its high resistivity and capacity to withstand corrosive agents without oxidation, even in hot or sulfuric environments. It also comes with a higher corrosion ...

Can you use TC with kanthal?

Is kanthal good for vaping?

What temperature should I vape kanthal?

Is kanthal better than stainless steel?

Is kanthal toxic?

What is the best kanthal wire for vaping?

What is NI on a vape?

What is TC NI mode?

What does SS mean on a vape?

What wire is best for flavor?

What's the best coil for vaping?

Which is better Kanthal or Clapton?

What is Kanthal wire?

Kanthal wire is a ferritic iron, chromium-aluminium alloy and is used to build Rebuildable Atomizers (RBA’s)and Rebuildable Dripping Atomizers (RDA’s) for Mechanical Mods (Mech Mods). Kanthal Wire can be heated at temperatures up to 1400°C (2550°F). The actual type of wire size is identified by Gauge (AWG). Kanthal Wire can be used in many different sizes and on many different types of Rebuildable Atomizers. There are many different types of wick you can use to wrap your Kanthal wire around as well which will determine the outcome of your Ω (Ohms).

How to tell the diameter of Kanthal wire?

To understand the Diameters of Kanthal wire you must know that the Higher the number Gauge (AWG) = thinner wire = higher resistance per foot and the Lower the number Gauge (AWG) = thicker wire = lower resistance per foot. When you are dealing with length, the longer the wire = higher resistance and the shorter the wire = lower resistance.

What gauge is used to determine the size of Kanthal wire?

The actual type of wire size is identified by Gauge (AWG). Kanthal Wire can be used in many different sizes and on many different types of Rebuildable Atomizers. There are many different types of wick you can use to wrap your Kanthal wire around as well which will determine the outcome of your Ω (Ohms).

Can you use Kanthal wire on silica?

Kanthal Wire can be used for your silica wick build and in many different shapes , sizes and patterns. Some people do one turn on the silica (U Shaped), some use and “s” shaped, and some do pattens that cant even be explained. Silica is great with Kanthal Wire and there are endless possibilities when working with both of these items. Silica builds for Mechanical Vape Mods can generate some amazing clouds of vapor and depending on the type of Rebuildable Atomizer or Rebuildable Dripping Atomizer your are using, great flavor as well.

Is Ekowool the same as Silica?

Ekowool Wick is similar to Silica in that its a rope style wick which can be used in many different shapes, patterns and sizes. Using Ekowool and Kanthal Wire will give you similar tastes and flavor as Silica but when working with Kantahl and Ekowool, the wick is a little more “intact” and wont fray as much as Silica. Ekowool runs a little bigger than Silica as well, so if you are used to a 3mm Silica wick, take a step down when using Ekowool and get a 2mm wick.

What is Kanthal wire?

Kanthal wire is a ferritic iron-chromium-aluminum alloy with good resistance to oxidation. It is commonly used for vaping in straight wattage mode. Kanthal is a great place to start if you are just getting into rebuilding, dripping, etc. It is easy to work with, yet stiff enough to hold its shape when formed into coils—which comes into play during the wicking process. It is extremely popular as a primary wire when building single-wire coils.

Which is faster, stainless steel or Kanthal?

Different coil materials that come with different internal resistances will also have very different ramp-up times. For power mode wires, stainless steel is the faster to ramp, closely followed by nichrome, with Kanthal being significantly slower.

What wires are used for power mode?

Most vapers prefer power mode: it is just simpler. Kanthal, stainless steel, and nichrome are the three most popular power mode wires right now, and you might be wondering what would be the best one for you. Again, take note that if you have (or suspect you may have) a nickel allergy, then you should not vape on nichrome coils, ...

Can you vape with nichrome coils?

Again, take note that if you have (or suspect you may have) a nickel allergy, then you should not vape on nichrome coils, and maybe you should also avoid stainless steel. Kanthal has been the choice of most vapers for a longer time, due to its ease of use and higher resistance.

Is stainless steel safe to vape?

Second, it’s pure nickel, which some people might be uncomfortable vaping on. On top of that, many people do have a nickel allergy or various degrees of sensitivity. While stainless steel also has nickel in its alloy, it is not the primary component. If you belong in the above category you should stay away from nickel and nichrome, and be cautious with stainless steel.

Is nichrome better than Kanthal?

Nichrome behaves very much like Kanthal, but has lower resistance and heats faster. It is easy to coil and holds its shape well when wicking. Nichrome has a lower melting temperature than Kanthal, so you need to be careful when dry burning your coils—they will burn open if you aren’t careful.

Is stainless steel better than Kanthal?

Stainless steel is easy to form and holds its shape well. Like nichrome, it offers a faster ramp time than Kanthal due to its lower resistance for the same gauge. Take note to not dry burn stainless steel at high wattages when checking for hotspots or cleaning your build, as this might lead to the release of unwanted chemical compounds. A good workaround is to build spaced coils that don’t need to be pulsed for hotspots.

What materials does Kanthal use?

Kanthal can work with a wide variety of wicking materials like cotton, silica, ekowool, and stainless steel mesh.

What is Kanthal alloy?

Kanthal is a general trademark term that refers to a family of iron-aluminum-chromium alloys capable of withstanding high temperatures and conduct electricity, having variable resistances with respect to their gauge. It does not oxidize (or rust) rapidly in industrial applications and is also very resistant to a wide range of corrosive elements.

What is Kanthal wire used for?

There are basically three types of Kanthal wire that are commonly used in the building of micro coils for atomizers: A1, A, and D. A1 is mostly renowned for its high resistivity and capacity to withstand corrosive agents without oxidation, even in hot or sulfuric environments. It also comes with a higher corrosion resistance and an increased hot and creep strength, making it the most popular choice for micro-coils. It also has an increased higher tensile strength in comparison with Kanthal D. Kanthal A1 can withstand temperatures of around 1400 Celsius, A can go to as high as 1350 while D can only withstand 1300 degrees. Kanthal D does not withstand corrosion to sulfuric environments as good as Kanthal A1. We recommend that you only use Kanthal A1 when building your coils.

How many ohms should a vape coil be?

This is why, in order to be on the safe side, it’s always recommended that you vape between the 0.9 and 1.9 Ohms interval and use a powerful 30A battery.

Is Kanthal wire stronger than Nichrome?

Kanthal can operate at much higher temperatures than Nichrome, its rival. As opposed to Nichrome, it has a higher resistivity, higher surface load, higher yield strength, and decreased density. It can also last up to four times as long as Nichrome wire due to its better oxidation properties and resistance to corrosive environments.

Why is Kanthal used for heating elements?

The reason why kanthal works so well for heating elements is because it behaves in an extremely predictable fashion when an electrical current travels through it. Kanthal immediately forms a protective layer of aluminum oxide when it’s heated, allowing it to remain extremely durable in long-term use.

Why is temperature control important in vaping?

The main purpose of temperature control vaping is that it helps you avoid dry hits. Well, you can also do that yourself by vaping at a reasonable wattage and remembering to refill your tank. In that sense, temperature control vaping is an interesting gimmick, but it’s completely unnecessary for most people.

What happens if you exceed the temperature limit on a mod?

Temperature control made it possible to set a temperature limit for your coil, and if the coil ever exceeded that limit, your mod would cut its power immediately to prevent a dry hit or burned wick. For temperature control technology to work, the electrical resistance of the coil needs to change when the coil heats up.

What material is used for RDA coils?

Nichrome is a common material for pre-wrapped RDA coils, but you won’t see it often in the world of sub-ohm tanks. When you’re shopping for sub-ohm tank coils, kanthal and stainless steel are the materials you’re most likely to see. Compared to kanthal, stainless steel has a slightly lower resistance and a slightly faster ramp-up time ...

What is nichrome vaping?

Nichrome is a blend of nickel and chromium. The ratios of the two metals can vary; the most common nichrome alloy for vaping is Ni80, which consists of 80-percent nickel and 20-percent chromium.

Can you use nickel coils in wattage mode?

Nickel and titanium coils are intended for temperature control vaping only and should not be used in wattage mode. Even if the resistance of a nickel or titanium coil is within your mod’s supported range, wattage-based vaping is intended only for a coil that remains relatively stable in resistance during use.

Can you use stainless steel coils on a vape tank?

The last thing to consider before you buy a vape tank using stainless-steel coils is that stainless steel does contain a small amount of nickel. If you are allergic to nickel, you’ll probably want to avoid stainless steel and stick with kanthal coils.