what to use to delute the nicotine level in vape juice

• Method 2: Diluting. Some people simply add more VG to their existing e liquid bottle, and this naturally reduces the nicotine.
• Method 3: Going sub-ohm. Sub-ohm e-cigs vape much better with lower strength nicotine, (as in the lower ‘nic’ doesn’t rip your throat apart!).
• Method 4: Use the harsher tobacco flavors with a higher PG ratio mix. ...
• Method 5: Go DIY. Start to mix your own e-liquid, then you can step down in a way that suits you, be that by 1mg/ml (0.1%), 0.5mg/ml (0.05%), etc.

How to increase nicotine level in vape juice?

Using this equation, you can increase or decrease your nicotine level to your liking by purchasing another e-liquid of a different nicotine strength. Depending on the type of vape you have, you may be required to use thicker e-liquid (large, high-wattage tanks) or thinner e-liquid (smaller, mouth to lung tanks).

How can I reduce the nicotine in my e-liquid?

Some people simply add more VG to their existing e liquid bottle, and this naturally reduces the nicotine. Others use the same flavour e liquid but in zero nicotine, and dilute their e-liquid with that.

Can e-liquids help you quit vaping?

Instead, e-liquids use pure, concentrated nicotine that can easily be stepped down over time so you can keep on vaping on your regular schedule while gradually reducing your nicotine intake to zero. In order to effectively step down your nicotine level, you first need to determine the appropriate nicotine level to begin with.

Do sub ohm e-cigs vape better?

Sub-ohm e-cigs vape much better with lower strength nicotine, (as in the lower ‘nic’ doesn’t rip your throat apart!). Simply switching to sub ohm immediately reduces your nicotine intake. …and reduce your nicotine levels with them.

How do I lower the NIC level in my e juice?

Some people simply buy a bottle of 3 mg liquid in their favorite flavor such as American Red Tobacco and then buy a second bottle of zero nicotine in the same flavor. This way you can add a few drops of zero nicotine liquid to your tank and work your way to a 50/50 mix that would be equivalent to 1.5 mg.

How do you reduce nicotine in a vape?

Some people simply add more VG to their existing e liquid bottle, and this naturally reduces the nicotine. Others use the same flavour e liquid but in zero nicotine, and dilute their e-liquid with that. You can simply add the zero nicotine as you use up the e-liquid.

What can I use to thin out vape juice?

Adding about 5-7% of vodka will thin out your e-liquid nicely. This is why many vapers suggest using vodka to clean coil heads. But don't go overboard. Usually, 5 to 7% of alcohol will thin out your e-liquid nicely.

Can nicotine be diluted?

Diluted liquid nicotine is primarily used for those who wish to make their own e-liquids. DIY vapers know that all e-liquids must include four ingredients: flavoring, vegetable glycerin (VG), propylene glycol (PG) and, of course, nicotine.

How do you zero a NIC?

How to zero vapeMultiple short inhales: Take a small puff. Instead of immediately exhaling, quickly inhale a short bit of air again from mouth and nose. Still not exhaling. ... One deep inhale: Take a small puff. Then take that puff down to the lungs in a long and deep inhale, lasting about three to five seconds.

Is 6mg of nicotine a lot?

6mg/mL… 6mg/mL strength is generally a good starting option for those who are current moderate/light smokers and are planning to use a “tank” device or an atomizer. If you are trying to switch from chewing tobacco or nicotine gum, this may also be the strength you need.

Can you add water to nicotine juice?

Can and Should You Do This? Yes, you can add water to your e-liquid and still vape it. There are actually lots of vapers out there who routinely add a certain amount of water to each vape juice bottle in order to enhance their experience.

How do I lower the VG in my vape juice?

0:252:335 Ways to Thin Out Thick E Juice - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd is actually why many people suggest soaking old coil heads in vodka to clean them and reuse themMoreAnd is actually why many people suggest soaking old coil heads in vodka to clean them and reuse them. So if you want to use vodka to thin out your juice try adding 5 to 7-percent.

What makes vape juice thick?

E-juice viscosity has a defined and noticeable effect on how enjoyable a vape session can be, as not all e-juices nor devices are made equal. Exactly how thick an e-liquid can be, is related directly to the proportion of propylene glycol (PG) and vegetable glycerin (VG) present in the mixture.

Can you add water to e-liquid?

Mixing e-liquids with water In short – yes, you can your e-liquid with water. Be mindful of the quantity of water you add and ALWAYS use distilled water. Start by adding a little bit of water and keep track of your experiments. Too much water may lower the atomizer temperature due to its lower boiling point.

What is the ratio of PG and VG in vapes?

Similar to nicotine, PG and VG can be adjusted at a 1:1 ratio, producing an average of the two ingredients. For example:

What happens if you drink too much nicotine?

But when nicotine in e-liquid is too weak, it can leave you unsatisfied and bring on withdrawal or cravings.

Do flavourless liquids have any flavouring?

Flavourless e-liquids don’t contain any flavouring at all, but may provide a slight sweetness from the VG and PG’s natural properties. To increase the flavour level of your e-liquid, you’ll want to add e-liquid with a very pronounced flavour.

Can you dilute nicotine in e-liquid?

Fortunately, if you end up with an e-liquid that isn’t the right nicotine strength for you, you can dilute or saturate it with another e-liquid to bring it back to the optimal nicotine level for you.

Can you throw out a bottle of e-liquid?

Most of the time, especially if the nicotine strength is too high or the flavour is too strong, it’s tempting to throw out the bottle. However, there are ways to dilute or strengthen your e-liquid’s nicotine or flavour with other e-liquid or raw ingredients so that you can save money and make the most of that overwhelming or underwhelming juice.

Can you ask another vaper for e-liquid?

If you aren’t familiar with flavourful e-liquids, asking another vaper or shop employee would likely point you in the right direction. Generally speaking, e-liquids’ nicotine strength, thickness, or flavour can be flexible if you know the result you’re looking for and how to achieve it.

Safety First

Always remember, when handling e-liquid that you should take proper precautions. In a diluted state, such as the levels we are discussing in this post, liquid nicotine poses little threat on contact with skin, but should still be treated with respect. As the label says, keep it away from children and animals and don’t drink the stuff.

The Concept Of Cutting E-Liquid

The concept is actually very simple, while the math may be confusing at first. We will start off with the simplest formula on the planet: doubling the solution will effectively half the nicotine content.

Using Straight USP Grade VG

The quickest and cheapest solution is to have some Vegetable Glycerin lying around the house. USP grade VG is readily available in many convenience stores and pharmacies and is extremely inexpensive.

Using The Original E-Liquid

There are many people who, when realizing that the e-liquid they bought was twice as high as their original intent will buy a second, nicotine free bottle. Similar in principle to our first experiment, the only difference being that the liquid will retain its full flavor. Mix the solutions together, shake them and leave the mixture to do its magic.

Conclusion

Cutting e-liquid to reduce the nicotine content is the simplest form of DIY. As long as you pay attention to the safety aspects of mixing your own e-liquid together, there is no reason you should ever have to throw away another bottle just because the nicotine is too high.

How to reduce nicotine in e-liquid?

Method 2: Diluting. Some people simply add more VG to their existing e liquid bottle, and this naturally reduces the nicotine. Others use the same flavour e liquid but in zero nicotine, and dilute their e-liquid with that. You can simply add the zero nicotine as you use up the e-liquid.

How to get off nicotine and tobacco?

Vaping is a way to help you get off the tobacco and nicotine for good if that is what you want. It is for you to decide. 2) Accountability. Write is down, tell people this is what you are doing, that way they can support you. Then set a start date. 3) Check out what devices you are using.

Is sub ohm vape better than nic?

Sub-oh m e-cigs vape much better with lower strength nicotine, (as in the lower ‘nic’ doesn’t rip your throat apart!). Simply switching to sub ohm immediately reduces your nicotine intake.

How long does it take to stop smoking?

You should make sure that you are gradually going for lower nicotine levels. Don’t think that you will be stopped in just one week. You should smoke a while on one nicotine strength, before you go lower again. The longer you take to stop smoking the better the success going to be.

Can you smoke e-cigs at the same strength?

This isn’t going to work. You should start smoking the e cig at the same strength as what you would have smoke with normal cigarettes.

Will Cunningham Senior Member ECF Veteran

All of my e- juice is at 24mg. I really did need that level when I quit smoking, especially the first few weeks. Now I have well over $100 of 24mg e- juice (Most now from Mt Baker, each with 2 flavor shots).

LisaR Ultra Member ECF Veteran

You can dilute it with PG and VG, no problem, and it won't even need a couple of weeks to steep. Just shake it really, really well and it could maybe sit for a day or so (keep shaking!). But it will definitely dilute the flavor. If you think the flavor is too strong to begin with, that might not be a problem, though.

rc3po Super Member ECF Veteran

Just dilute it a little at a time until you notice the flavor trailing off a little, then stop. That's what I do. Plus I have a few different tobacco flavors that I can take a few drops out of to put a little flavor back into the juice, or I'll add some café mocha.

Will Cunningham Senior Member ECF Veteran

Thanks guys, I will definitly try it out on a few flavors, maybe some of my less favorite ones to test it out. With the 2 flavor shots there seems to be plenty of flavoring so I'm thinking it should work. But for the price if I find a flavor that's my favorite I probably would just re-order with 18mg.

rc3po Super Member ECF Veteran

If you buy good juice from reputable companies, you don't need to steep it very long. There are some vid's on you-tube about that stuff.

LisaR Ultra Member ECF Veteran

Glad that helps! And actually, you probably won't need to steep it at all (if the original juice is already steeped), just shake it really, really well.

Boletus Super Member ECF Veteran

But for the price if I find a flavor that's my favorite I probably would just re-order with 18mg. I just can't make anymore $80 orders!

Which is better, VG or pure vape?

High VG vape juices are better at producing thicker, better clouds. Pure VG is the best if you’re interested in cloud-chasing. However, if you take this route, you’re losing out on flavor. For better flavor, juices that are at least 50% PG tend to perform better.

What is the final ingredient in e-liquid?

Nicotine is the final and optional ingredient in an e-liquid. When you purchase a bottle of e-liquid, it is up to you to decide with how much (if any at all) nicotine will the liquid be diluted. Both naturally and synthetically produced types of nicotine are used.

What is VG in cooking?

Derived from vegetable oils, this natural chemical’s main role is to suspend other ingredients. VG is also called a base liquid (cause it’s usually one of two predominant ingredients, the other one being PG).

Is WFI a vape?

Water For Injection (WFI) Used frequently in medicine, WFI is sterilized and contains no additives. WFI can be found in local pharmacies, and there’s no danger in adding it to your vape juice (but keep it to a 4-6% mark).

Is vape juice full bodied?

But, a lot of times, it’s the feel of the vape juice that’s a bit… off. It doesn’t really fill up your lungs. It’s not full-bodied. Or it’s too full-bodied. All of this has to do with how thick – or thin – your vape juice is. This is called vape juice viscosity. And it can make or break your vaping experience.

Can you use vodka to clean coil heads?

Well, you can. Adding about 5-7% of vodka to your e-liquid will thin it out nicely. This is why many vapers suggest using vodka to clean coil heads. But don’t go overboard. Usually, 5 to 7% of alcohol will thin out your vape juice nicely. Any more than that will burn your throat right off.

Can e-liquid wicks be clogged?

Sometimes, certain e-liquids can clog your coils which results in poor flavor, short coil life, and sometimes even dry hits. Not all coil cotton wicks can withstand all e-liquid viscosity levels. Thinning out your juice is useful if you feel that it is too viscous for your wick.

Reasons for Increasing Nicotine

There are lots of reasons why you might need to add nicotine to an existing bottle of already-made e-juice.

Differences Between VG-Based and PG-Based Nicotine

The conversion for milliliters to grams is generally the same number if you’re using PG-based nicotine, so in this case, I would add 0.175 grams of nicotine.