To make a 6mg e-liquid, mix 1 part nicotine to 2 parts flavoured base (your PG, VG and flavour concentrates). That means you divide the volume of the nicotine-free base liquid by 2, then add that much of the 18mg nicotine liquid. You add 2 nic shots to every 40ml of nicotine-free e-liquid.
Full Answer
How to make vape juice?
When you get your package, use the pipettes to drip about 10-20 drops of flavoring in one of your empty bottles. Fill your bottle up to the middle with PG and the rest with VG. Shake and set aside for a few hours to let the bubbles settle. Try your vape juice, and adjust to taste. You now have 50 mL of vape juice that you made!
Is it better to mix vape juice by volume or weight?
Note: I recommend mixing by weight as it’s cleaner and more accurate for smaller quantities of e-liquid (like batches under 100 mL). Mixing by volume is fine, and many pros prefer doing it that way, but it can get messier than mixing by weight in most cases. What do you need to make your own vape juice?
How many syringes do you need to mix vape?
Syringes for mixing by volume: I advise getting some 10-30 mL syringes for your base liquid, and plenty of 1-5 mL syringes for nicotine and flavor concentrates. You’ll also need some needles—I recommend 14 gauge to make dealing with thick VG easier.
How do you make a 6mg e-liquid?
To make a 6mg e-liquid, mix 1 part nicotine to 2 parts flavoured base (your PG, VG and flavour concentrates). That means you divide the volume of the nicotine-free base liquid by 2, then add that much of the 18mg nicotine liquid. You add 2 nic shots to every 40ml of nicotine-free e-liquid. To make 80ml into 6mg strength liquid
How do you make a 3 mg nic shot?
To make a 3mg e-liquid, mix 1 part nicotine to 5 parts flavoured base (your PG, VG and flavour concentrates). That means you divide the volume of the nicotine-free base liquid by 5, then add that much of the 18mg nicotine liquid. For each 50ml of nicotine-free e-liquid, you add 1 nic shot.
Can you mix 3mg and 6mg vape juice?
FLAVORED: CAN I MIX NICOTINE LEVELS? Purchase a bottle of 3 mg liquid in your favorite flavor, then buy a second bottle in 6mg Nicotine of the same flavor (or if you like to mix flavors, in any flavor you want!). We recommend using the same BASE MIX when mixing e-liquid.
Can I dilute 6mg vape juice?
6mg + 6mg = 6mg In order for this calculation to work, both e-liquids must be combined at a 1:1 ratio. Using this equation, you can increase or decrease your nicotine level to your liking by purchasing another e-liquid of a different nicotine strength.
How many NIC shots does it take to make 3mg?
100ml short fill – add two 10ml 18mg nic shots to take it up to 3mg.
Can you add water to vape liquid?
Mixing e-liquids with water In short – yes, you can your e-liquid with water. Be mindful of the quantity of water you add and ALWAYS use distilled water. Start by adding a little bit of water and keep track of your experiments. Too much water may lower the atomizer temperature due to its lower boiling point.
Is 6mg vape juice strong?
6mg/mL… 6mg/mL strength is generally a good starting option for those who are current moderate/light smokers and are planning to use a “tank” device or an atomizer. If you are trying to switch from chewing tobacco or nicotine gum, this may also be the strength you need.
What can I use to thin out vape juice?
If you want to thin out your e-juice, try adding 5-7% vodka. Be aware though that this will add a little throat hit to your e-juice.
How do you thin out vape juice?
Adding about 5-7% of vodka will thin out your e-liquid nicely. This is why many vapers suggest using vodka to clean coil heads. But don't go overboard. Usually, 5 to 7% of alcohol will thin out your e-liquid nicely.
What is the mix ratio for vape juice?
For every 10ml of vape juice, that is a 100%, then the ratio mixture is 95% to 80% PG/VG and the remaining variable is 5% to 20%, of concentrated flavor or whatever the chosen nicotine level. For those who prefer to create their own vape juice flavor, DIY vaping , that is where vaping ratios play the biggest role.
What is 3% nicotine in mg?
3mg nicotine - This is the lowest level nicotine you can get in a liquid (unless you mix it yourself with some 0mg to dilute it). It's often the ideal final step for people quitting smoking, who have reduced their intake to almost nothing.
How many 3mg vape puffs equal a cigarette?
With that in mind, a full bottle of a 3 mg juice is about a 5th of an average cigarette. It would take many puffs of a 3 mg vape to get as much nicotine as an average cigarette. You would have to vape five vape juice bottles to get as much nicotine as you would from a cigarette.
How much is 6mg of nicotine?
0.6%Converting from a nicotine strength in mg/mL to a percentage is easy. Just divide the amount of nicotine in mg/mL by 10....Converting Nicotine Strengths.0mg= 0mg/mL= 0%6mg= 6mg/ML= 0.6%12mg= 12mg/mL= 1.2%1 more row
How much nicotine do you need to make 6mg?
How much nicotine do I need to add to make 6mg e-liquid? To make a 6mg e-liquid, mix 1 part nicotine to 2 parts flavoured base (your PG, VG and flavour concentrates). That means you divide the volume of the nicotine-free base liquid by 2, then add that much of the 18mg nicotine liquid. You add 2 nic shots to every 40ml of nicotine-free e-liquid.
How much nicotine is in an e-liquid?
The amount of nicotine in an e-liquid is usually written as a number of mg. The most common in the UK are 3mg, 6mg, 12mg and 18mg - this makes it really easy to calculate how much nicotine to add. What often confuses people is the fact that this not the total number of mg in the bottle but the number of mg (milligrams) of nicotine in each ml ...
How many mg of nicotine in a 10ml bottle?
In a 10ml bottle, there are 10mls of liquid, each with 6mg of nicotine in. So in a 10ml bottle there are 6mg x 10ml = 60mg of nicotine in total.
What percentage of nicotine is in a liquid?
This tells you what percentage of the liquid is nicotine. Instead of 3mg, you will see 0.3%. Instead of 6mg, you will see 0.6%. Instead of 12mg, you will see 1.2%. The nicotine is in a solution of PG and/or VG.
Do you need to mix nicotine before vaping?
It is important to ensure you mix the right amount of nicotine into you e-liquid before you vape. Whether you are adding nicotine to shortfills, or making your own e-juice from scratch, you need to know how much nicotine liquid to add to your nicotine-free base liquid.
Adding Nicotine To Ejuice
Sure you can! This is why this post exists. For whatever result that you want to achieve, mixing nicotine into your own e-liquid can be fun, but you need to be real careful when doing that. There’s more to it than simply pour the nic shot into your liquid.
How Much Nicotine Should I Add?
To make a 3mg e-liquid, mix 1 part nicotine to 5 parts e-liquid base (the e-liquid that contents PG, VG and flavour). That indicates you split the quantity of the nicotine-free base vape juice by 5, then put that much of the 18mg nicotine fluid. For each 50ml of nicotine-free e-liquid, you add 1 nic shot.
How To Use The Nicotine Calculator?
Simply enter the quantity of nicotine-free liquid, the stamina of your nic shot and also desired toughness. Our nicotine calculator down below will show you the volume of nicotine base you require to add to your bottle.
Nicotine Mixing Calculator
If you’re adding nicotine to a ready-to-vape juice, use the yellow line ‘Nicotine Base’ for the the amount of nicotine to add. Ignore the PG/VG & Doubler lines.
How many ml of nicotine is in a 10ml shot?
These 10ml nicotine shots are usually 18mg in strength if you’re buying within the EU, which is the maximum size and strength of nicotine you can purchase since the introduction of the TPD regulations. Just add one or more 10ml nicotine shots to a bottle of nicotine free, flavored e-juice and you’re good to go.
How to add a nicotine shot to a shortfill bottle?
Adding a nicotine shot to a shortfill bottle is really simple. Just unscrew the cap of both bottles, carefully pour the contents of your nicotine shot into the shortfill bottle and replace the lid. Make sure you dispose of the empty nicotine shot responsibly and wash your hands thoroughly! All that’s left to do is give your shortfill bottle ...
How much nicotine can you increase with a shot calculator?
For example, if you want to increase from a 3mg nicotine strength to 6mg, 12mg or more.
How much space does a shortfill bottle have?
Your shortfill bottle is filled with PG, VG and flavor concentrate (s) to roughly 80% capacity. Therefore, you only have enough space for a maximum strength of 6mg nicotine before the bottle becomes full.
Is nicotine a toxic substance?
It’s considered a toxic substance and dangerous if not used with precaution! If you’re new to the concept of nicotine shots and shortfill bottles, take a look at our beginners guide to Nicotine Shots and Shortfill E-Liquid…. Also, before you go any further, be sure you know exactly what nicotine strength you need….
Do you need to steep e-liquid?
In most cases you don’t need to steep your short fill bottle of e-liquid. This is because it’s probably had plenty of time to steep before it reaches you! As you’re only adding nicotine to the e-juice, giving it a damn good shake before vaping should mix it thoroughly!
Flavour Concentrate
The flavours you would like to add. Flavours displayed as a percentage.
Buy DIY Mixing Products
Our DIY mixing kit comes with all the essentials for premixing your own e-liquid.
Amount To Produce
Input the total amount of e-liquid you wish to make. You can change this at any time and the overall ingredient measurements will adjust accordingly.
Desired Nicotine Strength
This is where you input your overall desired nicotine strength you wish to vape at.
Nicotine Base Strength
Leave this at 18mg if using our NicIt Up or amend accordingly if you have another nicotine strength.
Nicotine Base Ratio
Nicotine also has its own VG and PG ratio, just input the ratio in this section as displayed on the nicotine bottle/label (select “Custom” and change accordingly).
Flavour Concentrate
We recommend mixing the flavour between 15% - 20% (with 20% being the most preferred) and all our flavour concentrates are 100% PG based. Please note that if you are mixing Black-Jack or other strong menthol or Icy/Minty flavours, we only recommend mixing between 10% - 12% due to the strong nature of the flavour.
Vape Juice Mixology
Trying new innovative vape juice flavor combinations is an obvious reason to mix e-liquids. In this case, you would combine two vape juices of the same style.
Combining Vape Juices
Combining flavors of the same style of e-liquid is obviously easier and involves fewer considerations. It is just a matter of matching up flavors.
Nicotine Strengths
Keep in mind that even 12mg might be a bit stiff in a sub-ohm tank and high wattage mod. But it is a quite useful strength for a vape pod of 20 or 30 watts.
Spearmint I Love Salts and Magic Man One Hit Wonder TFN Salts
The combination of Spearmint Gum by I Love Salts and Magic Man by One Hit Wonder is a perfect alternative to a lush ice flavored disposable vape. A lush ice flavor is missing from the I Love Salts lineup and Magic Man Ice isn’t an option. Plus, you can’t really beat either flavor. They are the best in their class.
French Toast Holy Cannoli and Blue Citrus Phrut
Some flavor combinations just work. Imagine French toast with blueberry, raspberry, and pinch of tart lemon. Sounds pretty good. You can make it happen by combining Blue Citrus by Phrut e-liquids with French Toast Holy Cannoli. Blue raspberry and the sinfully delicious flavor of French Toast Holy Cannoli are the stars.
Milky Shake by Fixx-E Liquid and Classic Menthol I Love Salts
If you want to add a nicotine free high-VG juice to a nic salt, consider this unique combination: 2 or 3 parts Classic Menthol from I Love Salts 25mg and 1 part Milky Shake by Fixx-E Liquid . If you currently use 50mg nic salts, there is no reason to bother mixing 0mg strength high-VG juices with a nic salt juice.
Ever Berry by Blossom E-Liquid and POM by Nude Juice
The recipes above provide a basic framework for reworking and diluting potent nic salts with high-VG juices. Another innovative way to enjoy e-liquids is to take a pair of vape juices of the same style and blend them for an enhanced flavor. You still have the option to manipulate the nicotine level.
Chefs Super Concentrates flavor reviews by SessionDrummer
All tested at 1.5%, 70/30, using the beloved SteamCrave RDTA v.1, with fresh cotton and burned coils between all tests.
Capella Custard Cake reviewed by SessionDrummer
Tested on my beloved SteamCrave RDTA v.1, with dual 7 wrap, Kanthal vertical coils, with fresh cotton, and pulsed coils in between all flavors. Steeped 1.5+ weeks.
Flavorah (FLV) flavor reviews by SessionDrummer
All mixed 7-28-17, steeped 2 weeks, 70v/30p, on dual kanthal coils @ .33ohms on Steam Crave RDTA v.1. Dry burn coils and fresh cotton before each flavor for clarity. Also these flavors were evaluated purely as single flavors and @ percentages listed below. Differing percentages, and/or mixing could be very different.
Wonder Flavors flavor reviews by SessionDrummer Part 1
Thanks out to u/bullcityflavors, and u/wllmc for donating a large number of these, for testing purposes. The flavors have just arrived, and have decided to mix all @ 3% which seemed to be a good average amongst the flavors.
One on One flavor reviews by SessionDrummer
All mixed and steeped for 2 weeks, 70v/30p, on dual kanthal coils @ .33ohms on Steam Crave RDTA v.1. Dry burned coils and fresh cotton before each flavor for clarity. Also these flavors were evaluated purely as single flavors and @ 5% for the first batch, and 7% for the second batch. Differing percentages, and/or mixing could be very different.
Flavor Art flavors reviewed by SessionDrummer
Despite using FA’s flavors for years, I’m FINALLY getting around to doing some SFT on them. A huge thanks out to @drew1 from BCF for sending these new flavors my way for testing. Mixing them now, and am finalizing the steep time (s).
Chemnovatic flavors reviewed by SessionDrummer
Chemno’s rates appear on the high side, but having never tried them, will settle at the mid point for testing.
FoxdenVixen Senior Member Verified Member ECF Veteran
I have searched here and could not find anything that can definitively answer my question. I asked on another thread about mixing 2 different flavors of pre-made liquids with 18 mg of nicotine each. I was worried that I would end up with 36 mg of nicotine as a result. I was informed that this is not the case.
mikewill45 Senior Member ECF Veteran
Yes, you are making sense. If you mix to 18 mg liquids together you will still have 18 mg for your final product. Think of it this way, if you open 2 cans of Coke and then pour them both together you don't end up with double strength Coke just twice as much.
FoxdenVixen Senior Member Verified Member ECF Veteran
Ok thank you! So my strength is 18....too much. Don't like the throat hit and the peppery taste. So I will buy another bottle of 0 mg and mix the 2 and be happy with 9! Or I could buy a 6 mg bottle and mix to get 12. I was a 1 1/2 pack a day smoker of Misty menthol 120s.
Shootist Ultra Member Verified Member ECF Veteran
Your math is flawed. If you have 10ml of juice A that contains 18mg of Nic and you have another 10ml of juice B that also has 18mg of Nic and you mix them together you end of with 20ml of juice and 18mg of Nic in that 20ml.
serenity21899 Vaping Master Verified Member ECF Veteran
I have searched here and could not find anything that can definitively answer my question. I asked on another thread about mixing 2 different flavors of pre-made liquids with 18 mg of nicotine each. I was worried that I would end up with 36 mg of nicotine as a result. I was informed that this is not the case.
FoxdenVixen Senior Member Verified Member ECF Veteran
Thanks Shootist. I was looking at what the nicotine levels would be. I realize that I would double the amount of liquid I would have.