what to do when vape says no atomizer

How to Fix Check Atomizer/No Atomizer On A Pod Vape

1. Clean Your Contact Points. The first step you should try if your pod vape isn’t firing or says check atomizer is...
2. Check Your Contact Points for Damage. If cleaning the contact points doesn’t fix the check atomizer error on your pod...
3. Reseat your Coil/Pod. Sometimes the most simple fixes are the most...

Full Answer

What should I do if my vaporizer is displaying No atomizer?

May 25, 2021 · This could be the reason why you are now getting a “No Atomizer” or “Check Atomizer” message in your vape. Thankfully the solution to this is simple. Remove the tank from the mod and check the threading where it connects to the mod. Do the same with the 510 connector. Clean the contacts and thread with a paper towel if there is gunk and debris.

Is it common for a vape to not have an atomizer?

Jun 22, 2020 · How to Fix Check Atomizer/No Atomizer On A Pod Vape 1. Clean Your Contact Points. The first step you should try if your pod vape isn’t firing or says check atomizer is... 2. Check Your Contact Points for Damage. If cleaning the contact points doesn’t fix the check atomizer error on your pod... 3. ...

How to fix a vape that won’t start?

Why is My Vape Saying “No Atomizer” or “Check Atomizer”? Know Your Comfort Level and Skill. A vaporizer is an electronic device, containing a battery that creates a very real... Take a Proactive Approach. Many vape issues can be avoided by simply performing regular cleanings and maintenance on... ...

What to do when your pod vape won’t fire?

Feb 18, 2021 · This may be a connection issue where the 510 connector on the top of the battery/mod isn't making proper contact with the tank, coil, or pod, in which case it will tell you 'no atomizer', if it says 'check atomizer' this is usually an indication that your battery/mod can't read the coil, ie it can't fathom the resistance, or it detects a problem.

Why does my vape keep saying no atomizer?

“Check Atomizer” or “No Atomizer” will appear when your vape mod or pod vape isn't reading your coil correctly. This can be due to the 510 connector not reading properly (where the tank screws onto the mod), the coil not making proper contact inside of the tank, or possibly a short.Jun 22, 2020

How do I reset my vape atomizer?

0:000:31How To Do A Factory Reset on Your IQC Vaporizer - YouTubeYouTubeStart of suggested clipEnd of suggested clipOnce the reset is complete the vaporizer will vibrate and button lights will. Turn. Off you.MoreOnce the reset is complete the vaporizer will vibrate and button lights will. Turn. Off you.

How do you fix the atomizer on a vape?

1:176:58How to fix a no atomizer message on your vape - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd make sure you can remove the base without the tank leaking. If not then decal the vape juice outMoreAnd make sure you can remove the base without the tank leaking. If not then decal the vape juice out of the tank. First. Now check that your coil is screwed into the base of the tank.

How do I get my vape to work again?

Break Air Bubbles. If you have a pod-based disposable vape, you might get weak hits if air bubbles form around the pod's wicks. Tap the device gently on a table to break the air bubbles. After giving the wicks a few seconds to get wet, you should get some nice hits again.Jun 28, 2020

Where is the atomizer located in a vape?

Housed within the vape tank, an atomizer head contains a coil of thin wire and wicking material. We will go into the finer details a little bit later, but the atomizer creates vapour.

Do you need an atomizer to vape?

Before going further, it's important to note that all e-cigarettes need an atomizer to work. Cartomizers and clearomizers all have atomizers to vaporize e-juice. The main difference among the three is the delivery system.

How do I reset my Smok vape?

Reset the tank - You can 'reset' the tank by removing it from the mod, checking the screws are tight and pressing the fire button. Then re-attach your tank and select “n” when you are asked if it is a new coil.Aug 23, 2018

Where is the 510 pin on a vape?

The 510 connector get its name from the length of the connector and the amount of threads it has for it to make a connection. It runs 5mm long and 5 threads is on the male connection, which is on the atomizer, and the other 5 is on the female connection, which is on the battery or mod.

What to do if your pod vape isn't firing?

If your pod vape isn’t firing, has a blinking LED and won’t fire, or says Check Atomizer or No Atomizer, you can follow a few of the same steps listed above for tanks: 1. Clean Your Contact Points. The first step you should try if your pod vape isn’t firing or says check atomizer is cleaning out your contact points.

How to clean a pod from a vape?

Also check inside your vape where the pod attaches to it. If you see any ejuice or dirt, clean it out with a paper towel then reinsert the pod and try again.

What to do if cleaning contact points doesn't fix check atomizer error?

If cleaning the contact points doesn’t fix the check atomizer error on your pod vape, you’ll want to carefully examine the contact pins/plates on your pod vape and on your pod for damage.

Why won't my 510 mod work?

Simply put, if your mod can’t read your tank and coil resistance properly, it won’t be able to deliver power and therefore won’t work.

How to clean a tank after taking apart?

Once you’ve taken apart your tank, unscrew your coil from the base of the tank. Now, you’ll want to clean the bottom of the coil where it screws into the tank and makes contact. You’ll also want to clean your tanks contact point with the mod as well. Once done, reseat your coil, and reassemble your tank.

What causes a check atomizer short?

Loose pieces of metal on the build deck will cause your mod to display “Check Atomizer” or “Atomizer Short”. Even very small pieces or trimmings of wire can cause a short or a check atomizer error on an RDA/RTA/RDTA. First, inspect the build deck closely for loose pieces of wire or other foreign objects.

What is a versed vaper?

The Versed Vaper team are a group of passionate and experienced vapers who take pride in writing helpful, quality content about vaping. From deals, to news and reviews, we've got you covered on all things vaping. Remember to subscribe to our newsletter, and follow us on Twitter, Instagram, and Facebook!

Why is my vape not recognizing my atomizer?

If your vape device isn’t recognizing your atomizer, it could be an issue as simple as an interrupted connection. Dust and debris can get in the way of the electrical current, leading to a complete mechanical failure. Other culprits can include an atomizer that’s completely screwed in, or a center pin that’s missing its mark. Take a close look at all the connection points on your device, clean them off, and make any adjustments to complete the current.

How to prevent vaping issues?

Take a Proactive Approach. Many vape issues can be avoided by simply performing regular cleanings and maintenance on your device. Taking proper care of your vape can help you minimize issues, and keep your vaporizer running in tip-top shape. Cleaning your vape isn’t difficult, and takes just a few moments of your day.

How to tell if a vape is malfunctioning?

One easy way to know if your atomizer is malfunctioning is if your vape displays one of the following messages: check atomizer, no atomizer, or no atomizer found. If your vape shows one of these no atomizer messages, continue reading to find out how to proceed.

What is a vaporizer?

A vaporizer is an electronic device, containing a battery that creates a very real electrical current. Above all, your safety should be your top priority. It’s easy enough to get a new atomizer or vape if yours has turned into a dud, but recovering from an injury that resulted from an overconfident, uninformed repair attempt is a much larger order.

What tool to use to adjust vape pins?

However, if your vape isn’t one of these models, use a small tool, like a precision flathead screwdriver, to adjust the pin position ever-so-slightly.

How long does it take to read a vaporizer?

Reading Time: 4 minutes . Your vaporizer is a lot like your car: you count on it on a daily basis, it’s a critical part of your everyday routine, and you hope to avoid issues at all costs. However, just like a vehicle, vaporizers do run into mechanical problems every now and then.

What is the pin on a vape?

The pin is the connection tip that’s found inside the 510 connector, responsible for making contact between your atomizer and vape device. If your pin is too low or too high, it can’t properly connect, and your device simply won’t work.

How to clean a tank when it is apart?

When your tank is apart, unscrew the coil from the base of the tank and clean the bottom of the coil where it screws into the tank and makes contact. You’ll also need to do the same to the tank, ie clean the area inside the tank where the coil sits. When clean and dry reinstall the coil and reassemble your tank.

Can you use a sub ohm battery on a mod?

Standard batteries probably won't fire below 1.0 Ohm and putting a tank with a sub-Ohm coil on a standard battery is a no no. If the new tank works fine on your mod you know the issue is with your existing tank or the coil. If your mod is still reading 'check atomizer' or 'no atomizer' with the new tank, it’s likely to be a problem with the mod.

What does it mean when an e-cigarette says no atomizer?

An e-cig that says ‘no atomizer’ or ‘check atomizer’ is a message that no vaper wants to see. A source of frustration because this message flashing up on your vape mod most probably means that you cannot vape.

How to get vape juice out of a tank?

Take the base of your tank off. Take care if it is full of fluid and make sure you can remove the base without the tank leaking. If not decant the vape juice out of the tank first. Now check that your coil is screwed into the base of the tank correctly.

What does it mean when your tank is sat flush with a rubber o-ring?

If you have over tightened your tank onto your mod, it can push the metal plate from the 510 connection up into the tank. This usually means that it is sat flush with a rubber o-ring. If this is the case then it won’t make a full connection to your e-cig.

How to get a tank to pop back into the correct position?

Take your tank off your mod and turn it off, or remove the battery. Then take something small, like a small screwdriver and very gently press down on the pin. You should feel the spring underneath and this can get it to pop back into the correct position. Try attaching your tank again and see if the message has gone.

Can a mod make a complete connection to a vape tank?

Over time the connection on your e-cig can gather dust, dirt and e-liquid. If this is the case and your mod can’t make a complete connection to your vape tank, then this message will display. Remove your tank from your e-cig and have a look at the threads and metal plate to make sure there are no larger pieces of debris there.

Why do vapers forget atomizer error messages?

They were added by the manufacturer to protect you from faulty atomizers, and to prevent firing mishaps that can cause damage or injury.

Why does my mod say no atomizer?

However, once you put your top cap on, the sides are touching the coil (usually because it’s either too large or protrudes to one side too much), and that causes your mod to show you a “no atomizer” or “short atomizer” error message.

What does it mean when your chipset says no atomizer?

When your chipset is responsible for an “atomizer short “or a “no atomizer” error message, it means that it’s preventing firing on the basest of levels. There’s nothing here that you can fiddle with or adjust to fix this.

Why does my vape pen leak?

There’s vape juice in your vape pen – leaky atomizers are damaged atomizers. When juice seeps into your circuitry, it can damage it and cause it to show error messages when there’s actually nothing wrong with the atomizer.

What is the guide to vaping?

Guide To Vaping is the largest online magazine blog that is dedicated to providing a vast selection of helpful and informative articles about the latest vaping news, vapor products, and CBD.

Why is my earbuds stuck?

You could have accidentally dropped your device, one of the two pins inside the connection area can be stuck due to dirt or grime, or you could have a coil that isn’t functioning properly.

What is the atomizer in vaping?

This is a component that makes up a vape or e cigarette. The atomizer is a crucial piece of a vaporizer and without this component almost no vaporizer would work.

Why is there no atomizer on my 510?

The no atomizer or check atomizer often comes up when the electrode pin in 510 configuration is not pressed against the firing pin, when the prebuilt coil is not connecting inside the base of the 510 electrode, or when the RBA is not correctly connected to the deck.

Why do you need to take up a new coil?

If the coil is interacting with the internal structure of your vaporizer you may need to take up a new coil or rebuild the coil so that it doesn't have the same break. Make sure any coil replacement you get is the right size and this can prevent the chance that it will touch the deck or cap.

What is a check atomizer?

Check atomizer is also called No atomizer. Atomizer shorts are often displayed when a coil begins to short-circuit. Atomizer short warnings will completely disrupt energy that goes into the atomizer to preserve it. Seeing these atomizer errors should never keep you from using your vaporizer.

What is an e-cigarette atomizer?

E-cigarette atomizers are responsible for seeding e-juice mostly and not dry materials. These types of atomizers are often found between the mouthpiece in the tank and air responsible for heating up the E juice to output vapor through the mouthpiece.

Do you need to know all the technical terms for vaping?

There is a fair amount of technical information surrounding vaping, and it can sometimes feel a bit overwhelming especially with some of the terminology that people that vape often may use. It's very unlikely that you'll need to know all of the technical terms for vape components to use a vape successfully, but learning ...

Can you use preinstalled coils with a vape tank?

If you are using preinstalled coils with a vape tank, you'll need to make sure that the base of the coil is connected to the base of your tank.