what to do when vape says atomizer high

Here is a checklist of things to do: Take the atomizer off of the mod Tighten the coil all the way. It could be that the coil is loose Check the 510 connection, and thoroughly clean the threading of the mod and atomizer with a q-tip

Full Answer

What to do if your vape says atomizer short?

If using an RDA/ RTA, check and see if the coil is touching the cap or deck. If error messages continue to pop up, use a different atomizer on the mod. If it still reads “atomizer short,” the problem is with the vape, not the atomizer or coil.

What to do when your vape won’t fire?

Clean Your Contact Points The first step you should try if your pod vape isn’t firing or says check atomizer is cleaning out your contact points. Take the pod out of your pod vape and check the bottom of the pod for any dirt or ejuice. Also check inside your vape where the pod attaches to it.

What should I not do with my atomizer?

Don’t let juice leak on your mod—it may find its way to the circuitry. Overtightening atomizers – people often overtighten their atomizers, to the point where they break the 510 pin out and/or snap the ground wire internally. Don’t over tighten your atomizer.

How do I clean the atomizer on my mod?

Check the 510 connection on your atomizer. This is the pin that connects the atomizer into the mod. Clean the threading of both the mod and the atomizer with a q-tip or paper towel.

How do you fix a high atomizer on a vape?

RecapClean all contacts on battery/mod, tank or pod.Remove and reinstall the coil (after cleaning)Try a new coil.Check the 510 pin and see if you can adjust it (mods/tanks)Try another tank on your mod.Try another mod with your tank.Adjust base of coil carefully if you can (mainly sub-Ohm coils)

How do I fix my atomizer in my tank?

3:256:58How to fix a no atomizer message on your vape - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe chances are this is an easy fix. Now the first thing we need to do is clean the metal plate ofMoreThe chances are this is an easy fix. Now the first thing we need to do is clean the metal plate of your 510 connection. Over time the connection on your e6 can gather dust dirt and e-liquid.

How do I fix my vape atomizer short?

Use these steps to troubleshoot a “Check Atomizer” error.Remove the tank from your mod. Has e-liquid leaked into the mod's threading? ... Disassemble the tank, removing the atomizer coil and then screwing it back in tightly. Reassemble the tank. ... Replace the atomizer coil.

How do you fix too high ohms?

SMOK Ohms Too High or Too Low Typically, pairing the proper SMOK-branded coils with your SMOK device is the easiest way to fix this problem. If you're working with a rebuildable atomizer (RBA), the resistance of your coils may be too high or low. Adjusting the resistance will usually clear the error.

What is atomizer on vape?

Atomizers. Atomizer refers to the wick and coil within a vape device. The wick (typically made of cotton) draws in e-liquid from the tank and onto the coil - the element that heats the e-liquid to produce a vapour.

How do I clean my vape atomizer?

To carry out this method, simply submerge your atomizer in some isopropyl alcohol for 30-60 minutes. This will cause the hardened dirt to become saturated and it will break down and pull away from the atomizer when you wipe it down with your cotton buds.

How do you check an atomizer?

How to Fix Check Atomizer/No Atomizer with a Vape TankTry Another Tank/Mod.Clean Your Contact Points.Check the 510 Pin on your Tank. If the 510 pin on your tank is damaged (where it connects to the mod) then this will cause a “Check Atomizer” or “No Atomizer” error. ... Check the 510 Connector on your Mod. ... Reseat Your Coil.

How do I reset my Smok vape?

Reset the tank - You can 'reset' the tank by removing it from the mod, checking the screws are tight and pressing the fire button. Then re-attach your tank and select “n” when you are asked if it is a new coil.

What is the 510 pin?

The 510 connector get its name from the length of the connector and the amount of threads it has for it to make a connection. It runs 5mm long and 5 threads is on the male connection, which is on the atomizer, and the other 5 is on the female connection, which is on the battery or mod.

What does ohms to high mean on a vape?

The higher the Ohm capacity of your vape, the more vapour that will be produced. Higher Ohms mean that larger vapour clouds can be produced while experiencing richer flavours from your liquid.

How do I lower the ohms on my vape?

To lower the resistance of your coil, you can use a thicker wire. If you apply the same power to two wires of the same length but different thickness, the thicker wire will heat up more slowly. To reach a similar temperature in the same time with a lower resistance coil (thicker wire), you need to provide more power.

What should my ohms be on my vape?

The standard or regular level of ohm when it comes to vaping and your clearomizer is between 2.4 and 2.8. This is by far the most common ohm range chosen by those looking for replacement coils, with the most commonly chosen being 2.5.

What to do if your pod vape isn't firing?

If your pod vape isn’t firing, has a blinking LED and won’t fire, or says Check Atomizer or No Atomizer, you can follow a few of the same steps listed above for tanks: 1. Clean Your Contact Points. The first step you should try if your pod vape isn’t firing or says check atomizer is cleaning out your contact points.

How to clean a pod from a vape?

Also check inside your vape where the pod attaches to it. If you see any ejuice or dirt, clean it out with a paper towel then reinsert the pod and try again.

What to do if cleaning contact points doesn't fix check atomizer error?

If cleaning the contact points doesn’t fix the check atomizer error on your pod vape, you’ll want to carefully examine the contact pins/plates on your pod vape and on your pod for damage.

How to clean a tank after taking apart?

Once you’ve taken apart your tank, unscrew your coil from the base of the tank. Now, you’ll want to clean the bottom of the coil where it screws into the tank and makes contact. You’ll also want to clean your tanks contact point with the mod as well. Once done, reseat your coil, and reassemble your tank.

What causes a check atomizer short?

Loose pieces of metal on the build deck will cause your mod to display “Check Atomizer” or “Atomizer Short”. Even very small pieces or trimmings of wire can cause a short or a check atomizer error on an RDA/RTA/RDTA. First, inspect the build deck closely for loose pieces of wire or other foreign objects.

Why is my mod reading the new tank correctly?

If your mod is reading the new tank correctly, it could be a problem with the coil on your other tank. You might also want to clean the contact points on the tank that was giving you the error. If your mod is still reading “check atomizer” with a new tank, it’s probably a problem with your mod.

What is a versed vaper?

The Versed Vaper team are a group of passionate and experienced vapers who take pride in writing helpful, quality content about vaping. From deals, to news and reviews, we've got you covered on all things vaping. Remember to subscribe to our newsletter, and follow us on Twitter, Instagram, and Facebook!

Why do vapers forget atomizer error messages?

They were added by the manufacturer to protect you from faulty atomizers, and to prevent firing mishaps that can cause damage or injury.

Why does my mod say no atomizer?

However, once you put your top cap on, the sides are touching the coil (usually because it’s either too large or protrudes to one side too much), and that causes your mod to show you a “no atomizer” or “short atomizer” error message.

What does it mean when your chipset says no atomizer?

When your chipset is responsible for an “atomizer short “or a “no atomizer” error message, it means that it’s preventing firing on the basest of levels. There’s nothing here that you can fiddle with or adjust to fix this.

Why does my vape pen leak?

There’s vape juice in your vape pen – leaky atomizers are damaged atomizers. When juice seeps into your circuitry, it can damage it and cause it to show error messages when there’s actually nothing wrong with the atomizer.

What does "check atomizer" mean?

One company may use the standard “atomizer short” error for a shorted coil, while another may say “check atomizer” for the same reason—or use it as an umbrella term for all atomizer issues.

Why do atomizers use peek insulators?

Almost all atomizers these days use PEEK insulators to separate the positive from the negative. Any damage to your insulators may cause a short, resulting in an “atomizer short” or a similar error.

What is Vaping360?

The Vaping360 team is a diverse group of experienced vaping contributors. We strive to bring you the finest content on all things vaping. Don’t forget to follow us on Facebook and Instagram for more!

What to do if your coil doesn't work?

If it still doesn’t work, try another coil. If the new coil works, you just got a bum coil which happens from time to time. For rebuildables, make sure to check your coils and all the connections are tight. The screws on a post may loosen a bit after during the build process—they may also loosen gradually with time.

Does dry burning a coil raise resistance?

Remedy: If you are using a rebuildable, note that dry burning the coil may eventually raise its resistance. If you are set on vaping on that coil, you will need to find a mod or an ohm meter that will fire it and see if dry burning it puts it into the range that your mod operates at.

Is it worth vaping on a device?

Even if it sometimes works, it’s not worth vaping on a device with electronic damage. If your job or lifestyle is making you prone to damaging your mod, try buying one with an IP67 certification. These are water and dust-resistant, and usually rugged enough to survive most everyday accidents. 6. Chipset failure.

Can you let juice leak on a mod?

Don’t let juice leak on your mod—it may find its way to the circuitry. Overtightening atomizers – people often overtighten their atomizers, to the point where they break the 510 pin out and/or snap the ground wire internally. Don’t over tighten your atomizer.

What are the problems with vaping atomizers?

The three most common atomizer problems are: Atomizer short warning. Atomizer low warning. No atomizer found warning. Those are the warnings that will typically pop up when you run into issues with the coil.

What is an atomizer in vaping?

Posted by Evelyn on August 8, 2019. Atomizers are the heart of vaping. Vape pens and mods are the power supply unit and the atomizers are responsible for vaporizing e-liquid. The term atomizer can refer to different things. It can refer to devices containing coils or it's also used to refer to the coil inside the device.

Why is there no atomizer found?

If the warning is still there after trying to fix it then it could be an issue with the mod being used. A "no atomizer" warning almost always means the coil being used is dead or loosely seated .

What is a RTA atomizer?

It can refer to devices containing coils or it's also used to refer to the coil inside the device. There are three types of atomizer devices: vape tanks , rebuildable drip atomizers (RDA), and rebuildable tank atomizers (RTA). These devices all use a coil that heats up and transforms vape juice into vapor.

Why does my atomizer give me a short message?

There could be a number of reasons why your device is giving you a short message. If you are using a rebuildable atomizer then your coil could be touching an unintended area like the deck or cap of the casing. If you are using a tank with a pre-built coil then the coil can either be defective or it could be loose.

How to fix an atomizer short?

How to fix an "Atomizer short" warning: Place batteries on an external charger to ensure they're both charging properly. For rebuildable atomizer users (RDA/RTA), make sure the coil is not touching the cap or deck and contains no breaks in your coil.

Why is my 510 atomizer low?

The atomizer low warning means the resistance of coils is too low for the mod being used. The atomizer short warning on your mod displays when the coil is causing a short-circuit.

What does it mean when a vape mod says check atomizer?

The message “Check Atomizer” means that your vape mod isn’t detecting the connected atomizer coil at all. That may mean that the tank isn’t assembled correctly, that the tank doesn’t have a firm connection with the mod or that the coil itself has a problem. Use these steps to troubleshoot a “Check Atomizer” error.

What does it mean when a vape mod says "Time Out"?

The message “Time Out” means that the length of your puff has exceeded what your vape mod’s puff timer will allow. Most vaping devices have built-in puff timers that help to prevent overheating. Suppose, for instance, that you’re carrying your vape mod in your pocket, and you’ve forgotten to lock it. You inadvertently push and hold the mod’s fire button when you sit down. Without a puff timer, that’s a potentially dangerous situation. With a puff timer, though, the device automatically cuts off, so its temperature stays in a safe range.

What does it mean when a vape mod says it has a short circuit?

When your vape mod tells you that it has a short circuit, it means that something is critically wrong with the electrical circuit connecting the battery in your vaping device to the atomizer coil. You might get the “Atomizer Short” message, for instance, if unexpected metal-on-metal contact occurs inside your tank. For example, maybe the coil in your tank is cross-threaded, so the coil is seated a little higher in the tank’s base than it should be, and that’s causing the tank’s chimney to touch the heating wire inside the coil. A manufacturing defect in the coil can also cause a short circuit.

What does "no atomizer" mean?

1. "No Atomizer" or "Check Atomizer". No atomizer / check atomizer alert: when the device does not detect an atomizer, the OLED screen will display "No Atomizer" or "Check Atomizer". ◆ Check the 510 electrode of your tank. Most of the devices have self-adjusting 510 connectors, but some have manually adjustable ones.

What does it mean when your mod is too hot?

Temperature alert: if the internal temperature of the device is over the supported temperature, the output will shut off automatically and the screen will display "Device Too Hot". This means you have used the mod for too long, and you should shut it down and wait for some time and then power on again.

Why won't my vape fire?

If the resistance of the coil is lower than what the device can tolerate , the vape will not fire. Dry burning is one way to get around this problem because it can raise the coil’s resistance. Another thing to do is add wraps to the coil, which will increase the resistance high enough so that the mod fires.

Why is my atomizer low?

A common reason why the atomizer low warning occurs during vaping is that the coil was not properly made, the connection is loose, it is not seated correctly, or it does not have an insulator. Another reason a user might get this warning is that he or she misjudged the size of the build.

What does low atomizer mean?

Atomizer Low means that the coil resistance is too low. Vapers who see any of these messages on their mod should stop using the vape immediately. But do not worry. These issues can be solved quickly so that the user can get back to vaping as soon as possible.

How to make sure your screw is tight?

Screws tend to loosen over time, so make sure they are tight. Another thing to do is to make sure there is enough space between the top cap and coil. If the coil touches anything other than the posts, it will result in a short.