Wear work gloves with grippy fingers when attempting to twist the tank apart. Try soaking the tank in warm, soapy water to loosen the threads. Grip the tank’s hardware with the tacky bottom surface of an old mousepad. If all else fails, you can unscrew the tank with a wrench or vice grips.
How to unscrew a stuck vape tank?
How To Unscrew A Stuck Vape Tank? 1. Non-stick Cloth This is probably the easiest way of separating a jammed vape tank from your mod. Here, you can use a non-stick piece of cloth, even a chamois cloth will do a good job, grip your vape tank and twiddle it off.
How to clean a dry vape tank?
Apr 04, 2019 · Your best bet for unlocking that stupid stuck vape tank is a vice grip or a pair of locking pliers which are easier to wrench closed and hold closed while you try your best twisting maneuvers. also, look for pliers with rounded inner teeth that will fit onto your vape better than straight-edged pliers. Dribble a Little Vape
How to fix a jammed vape tank?
Oct 08, 2019 · The increased grip will make it easier to unscrew in your hands. Freezer: Only try this one when the tank has been removed from the rest of the device. Put the tank in the freezer for 10-20 minutes, the cold temperature will make the parts contract and easier to loosen. That’s it. We know a stuck vape tank can be very frustrating, and even tempt you into a rage.
Why is my vape tank stuck closed?
Mar 14, 2020 · Wear work gloves with grippy fingers when attempting to twist the tank apart. Try soaking the tank in warm, soapy water to loosen the threads. Grip the tank’s hardware with the tacky bottom surface of an old mousepad. If all else …
Stuck Vape Tank : The Solutions
There are several ways to unscrew a stuck vape tank. Let’s run down some of the tried and tested ones.
1. Non-Stick Cloth
This first method is what works for me and my type of tank. I use a rough piece of cloth, an old chamois cloth will work, and simply use it to grip the tank and twist it off.
2. Rubber Gloves
If you have a pair of rubber gloves, simply wear them to get a better grip on your tank. This works like a charm and I know a lot of vapers who’ve purchased a pair of rubber gloves simply to unscrew stuck tanks.
4. Rubber Band Wrap
If you can’t get a piece of cloth to grip your tank properly, and you can’t source a pair of rubber gloves, rubber bands can work.
5. When All Else Fails
For seriously stuck tanks, where the above methods don’t work, you might want to whip out a can of WD-40.
Stuck Vape Tanks : Final Tip
Stuck vape tanks can be very infuriating and even advanced vapers shudder at the thought. The solutions are simple really, but just like getting a sliver of wood get stuck under your skin, it may be easy to deal with, but it can be irritating as heck.
ThatIrishGamerHD New Member
So I got my new coil and was vaping again but I must have over tightened the tank when screwing it on.Now it's time for a refill and I can't get this stupid tank apart.I have tried rubber gloves and I put it in the freezer for 10 minutes too but it won't budge.
TheRussianVaper Senior Member
You might have to force it, sounds like the ring got bunched up and stuck, so you might have to tare it and replace the ring. PS: I always lube the rings with a little bit of e- juice, makes it a lot easier later on and they last longer.
daviedog Vaping Master ECF Veteran
The rubber gloves as stated above do work,,but soak atty in PGA first. If there is any juice on your atty it will transfer to the gloves & you are SOL..
Andromendous Super Member ECF Veteran
You can fold up the rubber gloves and wrap it around the tank, then use the channel lock pliers. Ive done this a few times. As long as something thick is wrapped around it, it wont scratch it
Katcandoo Super Member Verified Member ECF Veteran
Happens to me all the time. I keep a pair of pliers and one of those flat rubber grippy jar opener things on hand. If you don't have a flat rubber grippy jar opener thing, a rubber band wound tightly on the base will work. Hold onto the base with whatever rubber thing you have, and use the pliers to (gently!) unscrew the top. Good luck!!!
evan le'garde Vaping Master ECF Veteran
I do sometimes wonder if threads such as this are posted just to enjoy waiting for the obvious answer, which i have no doubt everyone knows already. Which i'm going to type anyway.
crxess Grumpy Ole Man Verified Member ECF Veteran
As you vape down the e-liquid, the pressure rises within the tank. There is always a little bit of ejuice around the seals of the tank and it creates that vacuum. Breaking that vacuum without breaking the tank is the goal. Does this help?
What to do if your vape is stuck?
Remember that the stuck position means your vape could theoretically still draw power and that your battery could take damage from your un-sticking maneuvers. So the very first thing you should do if your tank is stuck to the lower half of the pen or mod is to drop the batteries out, if possible. This will take all the real danger out ...
How to get rid of a stuck vape?
Try wrapping your shirt tail (or the end of a clean t-shirt) around the stuck part of your vape, and possibly around the part you need to twist. Use the soft cotton fabric to ease the pain of ripping flesh when you try to wist so that you can safely grip the vape even tighter.
Do most people have telekinesis?
And if all else fails, don't forget to try opening the darn thing with your mind. Yes, most people in the known world do not possess the power of telekinesis, but you might just be the one in 7-billion to have it. And you never know until you try. Hopefully, the sheer power of your brain will prevail where hands, rubber, and pliers did not.
Why do people pair up?
There are many reasons why people tend to pair up into romantic partnerships. For companionship, survivability in the wilderness, and the ability to open jars. It's almost a rule of nature that if one person in a couple can't twist something open, the other will be able to.
How to Take Apart a Vape Tank
In most cases, disassembling a vape tank is a simple task that you can perform in a matter of seconds. Simply grip the tank’s top hardware and bottom hardware in opposite hands and twist counterclockwise to loosen the threads.
How to Remove Stuck Glass From a Vape Tank
One of the problems you might encounter when disassembling a vape tank is that the glass can sometimes be extremely stubborn. No matter how much you might wiggle the glass, it simply refuses to move. You don’t want to use tools or apply too much force in this case, because you’ll break the glass.
How to Disassemble a Vape Tank With a Locking Chimney
While the disassembly instructions that we provided above will work with almost all of the tanks on the market, there are a few tanks with unique designs. One of the best known of those is the Uwell Crown 3 (since replaced by the Uwell Crown 4, which has a different design).
How to Remove and Replace a Vape Coil
The most common reason for wanting to take apart a vape tank is because you’re replacing the atomizer coil. As we mentioned above, the atomizer coil usually screws into the tank’s bottom hardware, and you can remove it by twisting it counterclockwise.
How to Remove Broken Glass From a Vape Tank
As we’ve just explained, a vape tank’s glass enclosure can be an extremely stubborn component to remove. That’s even more problematic if you happen to break the glass because you’re going to encounter some sharp shards when you try to remove the remaining pieces.
How to Take Apart a Stuck Vape Tank
So far, our instructions for disassembling a vape tank have focused on taking your tank apart when it isn’t giving you any problems.
OK so Ive had the Troll for about 2 months and ive really been disappointed. that's until as a last chance before I threw it in the trash, I tried using it without any of the airflow filters n 2 staggered fused claps. The flavor is serious now! Just throwing that out there for anyone who has one
OK so Ive had the Troll for about 2 months and ive really been disappointed. that's until as a last chance before I threw it in the trash, I tried using it without any of the airflow filters n 2 staggered fused claps. The flavor is serious now! Just throwing that out there for anyone who has one
Is there some way i can fix this, the airlflow holes are not in the middle, and it starts to leak juice when I hold it at an angle, or do i need to buy a new tank?
Your one stop shop for getting any vaping questions answered. Please read the rules as we aren't your typical vaping subreddit!
