what to do if vape isnt reading atomizer

1. Clean Your Contact Points. The first step you should try if your pod vape isn’t firing or says check atomizer is cleaning out your contact points.
2. Check Your Contact Points for Damage. If cleaning the contact points doesn’t fix the check atomizer error on your pod vape, you’ll want to carefully examine the contact pins/plates ...
3. Reseat your Coil/Pod. Sometimes the most simple fixes are the most effective. ...
4. Try Another Coil/Pod. If you’ve tried all of the above steps and nothing is working, the problem could be that your coil or pod has an issue.

Why is my vape not reading my atomizer?

“Check Atomizer” or “No Atomizer” will appear when your vape mod or pod vape isn’t reading your coil correctly. This can be due to the 510 connector not reading properly (where the tank screws onto the mod), the coil not making proper contact inside of the tank, or possibly a short.

What to do when your pod vape won’t fire?

The first step you should try if your pod vape isn’t firing or says check atomizer is cleaning out your contact points. Take the pod out of your pod vape and check the bottom of the pod for any dirt or ejuice. Also check inside your vape where the pod attaches to it.

How to clean a vaporizer properly?

Make a habit of using a clean, damp cloth to wipe down the vaporizer, paying special attention to small crevices and connection points. A cotton swab can be an excellent way to gently reach even the tiniest of spaces, where gunk and grime like to hang out.

How do I take care of my vape device?

Most importantly, make safety a top priority anytime you attempt to work on your vape device. Many vape issues can be avoided by simply performing regular cleanings and maintenance on your device. Taking proper care of your vape can help you minimize issues, and keep your vaporizer running in tip-top shape.

Why won't my vape read the atomizer?

If you press the firing button on your e-cig and you see the message 'no atomizer' or 'check atomizer' it means that your vape mod is not reading the coil within your vape tank properly. It can be because of the 510 connection, the vape coil itself or the bits in between.

How do I fix my vape when it says no atomizer?

RecapClean all contacts on battery/mod, tank or pod.Remove and reinstall the coil (after cleaning)Try a new coil.Check the 510 pin and see if you can adjust it (mods/tanks)Try another tank on your mod.Try another mod with your tank.Adjust base of coil carefully if you can (mainly sub-Ohm coils)

How do I reset my vape atomizer?

0:000:31How To Do A Factory Reset on Your IQC Vaporizer - YouTubeYouTubeStart of suggested clipEnd of suggested clipOnce the reset is complete the vaporizer will vibrate and button lights will. Turn. Off you.MoreOnce the reset is complete the vaporizer will vibrate and button lights will. Turn. Off you.

How do I fix my atomizer in my tank?

3:256:58How to fix a no atomizer message on your vape - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe chances are this is an easy fix. Now the first thing we need to do is clean the metal plate ofMoreThe chances are this is an easy fix. Now the first thing we need to do is clean the metal plate of your 510 connection. Over time the connection on your e6 can gather dust dirt and e-liquid.

Is an atomizer a coil?

The coil is a small part in an electronic cigarette which gets hot. A coil head is also known as an atomizer head. These are words for the same thing, the heating element inside an e-cigarette.

How do you clean an atomizer?

To carry out this method, simply submerge your atomizer in some isopropyl alcohol for 30-60 minutes. This will cause the hardened dirt to become saturated and it will break down and pull away from the atomizer when you wipe it down with your cotton buds.

Why do atomizers stop working?

“Check Atomizer” or “No Atomizer” will appear when your vape mod or pod vape isn't reading your coil correctly. This can be due to the 510 connector not reading properly (where the tank screws onto the mod), the coil not making proper contact inside of the tank, or possibly a short.

How do you fix a vape that won't smoke?

Check your tank to make sure you have enough e-liquid. If your tank is completely full but you still have weak vapor, it is possible that your atomizer or coil has been flooded. If this happens, simply take your atomizer apart and clean it with a paper towel or gently blow through it to get the excess liquid out.

What is atomizer on a vape?

The e-cigarette atomizer is a heating element that turns e-liquid into vapor. It is usually made up of three parts: the actual heating coil, a mesh bridge and a wick that absorbs e-liquid. The atomizer is also known as a nebulizer.

How do I reset my Smok vape?

Reset the tank - You can 'reset' the tank by removing it from the mod, checking the screws are tight and pressing the fire button. Then re-attach your tank and select “n” when you are asked if it is a new coil.

How do you clean a vape coil?

How to clean your CoilLet your coil soak in ethanol, vinegar, or cheap vodka for at least a couple of hours.Place it under the tap and rinse.Rinse once more with some distilled water.Blow air on the open side of your coil to force water to the wicking holes.Set it aside until all water has evaporated.

What to do if your pod vape isn't firing?

If your pod vape isn’t firing, has a blinking LED and won’t fire, or says Check Atomizer or No Atomizer, you can follow a few of the same steps listed above for tanks: 1. Clean Your Contact Points. The first step you should try if your pod vape isn’t firing or says check atomizer is cleaning out your contact points.

What to do if cleaning contact points doesn't fix check atomizer error?

If cleaning the contact points doesn’t fix the check atomizer error on your pod vape, you’ll want to carefully examine the contact pins/plates on your pod vape and on your pod for damage.

How to clean a tank after taking apart?

Once you’ve taken apart your tank, unscrew your coil from the base of the tank. Now, you’ll want to clean the bottom of the coil where it screws into the tank and makes contact. You’ll also want to clean your tanks contact point with the mod as well. Once done, reseat your coil, and reassemble your tank.

How to clean a pod from a vape?

Also check inside your vape where the pod attaches to it. If you see any ejuice or dirt, clean it out with a paper towel then reinsert the pod and try again.

What causes a check atomizer short?

Loose pieces of metal on the build deck will cause your mod to display “Check Atomizer” or “Atomizer Short”. Even very small pieces or trimmings of wire can cause a short or a check atomizer error on an RDA/RTA/RDTA. First, inspect the build deck closely for loose pieces of wire or other foreign objects.

Why is my mod reading the new tank correctly?

If your mod is reading the new tank correctly, it could be a problem with the coil on your other tank. You might also want to clean the contact points on the tank that was giving you the error. If your mod is still reading “check atomizer” with a new tank, it’s probably a problem with your mod.

What is a versed vaper?

The Versed Vaper team are a group of passionate and experienced vapers who take pride in writing helpful, quality content about vaping. From deals, to news and reviews, we've got you covered on all things vaping. Remember to subscribe to our newsletter, and follow us on Twitter, Instagram, and Facebook!

Why is my vape not recognizing my atomizer?

If your vape device isn’t recognizing your atomizer, it could be an issue as simple as an interrupted connection. Dust and debris can get in the way of the electrical current, leading to a complete mechanical failure. Other culprits can include an atomizer that’s completely screwed in, or a center pin that’s missing its mark. Take a close look at all the connection points on your device, clean them off, and make any adjustments to complete the current.

How to prevent vaping issues?

Take a Proactive Approach. Many vape issues can be avoided by simply performing regular cleanings and maintenance on your device. Taking proper care of your vape can help you minimize issues, and keep your vaporizer running in tip-top shape. Cleaning your vape isn’t difficult, and takes just a few moments of your day.

How to tell if a vape is malfunctioning?

One easy way to know if your atomizer is malfunctioning is if your vape displays one of the following messages: check atomizer, no atomizer, or no atomizer found. If your vape shows one of these no atomizer messages, continue reading to find out how to proceed.

What is a vaporizer?

A vaporizer is an electronic device, containing a battery that creates a very real electrical current. Above all, your safety should be your top priority. It’s easy enough to get a new atomizer or vape if yours has turned into a dud, but recovering from an injury that resulted from an overconfident, uninformed repair attempt is a much larger order.

What tool to use to adjust vape pins?

However, if your vape isn’t one of these models, use a small tool, like a precision flathead screwdriver, to adjust the pin position ever-so-slightly.

How long does it take to read a vaporizer?

Reading Time: 4 minutes . Your vaporizer is a lot like your car: you count on it on a daily basis, it’s a critical part of your everyday routine, and you hope to avoid issues at all costs. However, just like a vehicle, vaporizers do run into mechanical problems every now and then.

What is the pin on a vape?

The pin is the connection tip that’s found inside the 510 connector, responsible for making contact between your atomizer and vape device. If your pin is too low or too high, it can’t properly connect, and your device simply won’t work.

The Ultimate Guide On Vape Wire and Vape Coil

A vape is a relatively complex device. You're well aware of what it does, but are you aware of how it works? Vapes turn vape liquid into...

How to Vape Properly in 7 Easy Steps

The concept of vaping is pretty straightforward, but it does require some preparation. Even if you get a disposable e-cigarette that comes...

Best E-juice to Extend Vape Coil Life

We change our replacement coils frequently due to the coil gunk, which is annoying. In addition, the cost of coil replacement isn’t...

How to Clean Any Pod Vaping System

If you’re fortunate enough to own one of the latest pod vaping systems from Premium Vape or another fine vape shop, you’ve experienced...

How to Vape Properly to Max Out the Vaping Experience?

As the whole vape culture continues to expand and take over the tobacco world, many people are turning to e-cigarettes. Younger people...

The Ultimate Guide On Vape Wire and Vape Coil

A vape is a relatively complex device. You're well aware of what it does, but are you aware of how it works? Vapes turn vape liquid into...

How to Vape Properly in 7 Easy Steps

The concept of vaping is pretty straightforward, but it does require some preparation. Even if you get a disposable e-cigarette that comes...

What does "No Atomiser" mean?

When you receive the "No atomizer" or "Check atomizer" message, it simply means that your mod does not think your tank is attached to the connection point, or more specifically, your coil or atomizer head. When you attempt to fire a mod without anything attached, you will see the same message.

Check Your Mod With Another Tank (or Vice Versa)

Although it is probably a problem related to your tank or atomizer, before you go ahead with a fix, it is a good idea to clarify the cause of the issue. Finding another mod or another tank and switching your setup is the easiest way to do this.

For Tank Issues

Most of the time when the error comes up, the problem lies with the tank. So here's what you do if there's an issue with the tank.

For Mod Issues

In the unlikely event that it’s actually your mod causing the problem rather than your tank, there are a few things you can do to rectify the issue. Generally speaking, though, if it’s a problem with your mod the fixes are more risky to perform and it might just not be possible to solve.

Get a New Mod

Sadly, certain things simply aren't fixable. For some reason, regardless of the situation, the mod may be malfunctioning or just unable to make a connection. In these instances, you might just need a completely new mod.

Cannabis oil has high viscosity and the concentrate may become stiff. When cannabis oil is cold or settled to one side of the cartridge, it may fail to flow correctly. To fix this, apply heat to the cart. Heating up the cart lowers the viscosity of the cannabis oil, which allows it to flow when you pull

A common solution for freeing up your settled cannabis oil involves using a hairdryer to heat the cart. Separate the cart from the battery and set the cart upright. On its low setting, hold a hairdryer about six inches away from the cart. Apply heat for about 30 seconds. When you see bubbles forming, let the cart sit for a few seconds.

Oil amounts appear low in cartridges

Sometimes when you purchase a vape cartridge, the oil level looks much lower than you thought it would be. If your oil level looks low, it could mean your oil has settled on one side. To resolve this problem, apply heat to the sides of the cart with a hair dryer method mentioned above and check to see if the oil level appears higher than it was.

What are the problems with vaping atomizers?

The three most common atomizer problems are: Atomizer short warning. Atomizer low warning. No atomizer found warning. Those are the warnings that will typically pop up when you run into issues with the coil.

What to do if you don't have an external charger for your vape?

If you do not have an external charger, then you will need to rely on your vape mod to identify the issue with your atomizer. If the batteries are the issue then either find the right coil resistance for the batteries (if they are not defective) and device being used or get a new pair of batteries.

Why is there no atomizer found?

If the warning is still there after trying to fix it then it could be an issue with the mod being used. A "no atomizer" warning almost always means the coil being used is dead or loosely seated .

What is a RTA atomizer?

It can refer to devices containing coils or it's also used to refer to the coil inside the device. There are three types of atomizer devices: vape tanks , rebuildable drip atomizers (RDA), and rebuildable tank atomizers (RTA). These devices all use a coil that heats up and transforms vape juice into vapor.

Why does my atomizer give me a short message?

There could be a number of reasons why your device is giving you a short message. If you are using a rebuildable atomizer then your coil could be touching an unintended area like the deck or cap of the casing. If you are using a tank with a pre-built coil then the coil can either be defective or it could be loose.

How to fix an atomizer short?

How to fix an "Atomizer short" warning: Place batteries on an external charger to ensure they're both charging properly. For rebuildable atomizer users (RDA/RTA), make sure the coil is not touching the cap or deck and contains no breaks in your coil.

What is an atomizer in vaping?

Posted by Evelyn on August 8, 2019. Atomizers are the heart of vaping. Vape pens and mods are the power supply unit and the atomizers are responsible for vaporizing e-liquid. The term atomizer can refer to different things. It can refer to devices containing coils or it's also used to refer to the coil inside the device.