Full Answer
What is the best temperature for a TC vape?
Most TC vape mods support temperature settings from 300ºF to 600ºF, so finding you sweet spot takes some experimentation. But once you know where your best vape experience is at, you can lock it in and the coil and power will never exceed it.
Should you use a TC wire for vaping?
All things considered, if you have a nickel allergy or sensitivity, using a TC wire is probably not the best idea. Our advice is to stick to wattage vaping using Kanthal, which is also the most commonly used wire for vape coils on the market.
Which vape wires work best for temperature control?
For power mode wires, stainless steel is the faster to ramp, closely followed by nichrome, with Kanthal being significantly slower. In basic terms, temperature control mods rely on a characteristic of your vaping wire to detect when to regulate the current and wattage delivered to the coil.
How does temperature affect vape wire resistance?
When you vape with Kanthal (the most popular vape wire), that resistance value doesn’t change. That’s a particular property of Kanthal: its resistance is static regardless of its temperature. For TC vaping, you’ll use wires that have a known resistance-increase as their temperature rises.
What is TC SS mode vape?
SS can be used in wattage or temperature control mode. Nickel 200: commonly known as ni200, it was the first temperature control coil but it's less common now due to some vapers having sensitivities to nickel.
What setting should my vape be on?
As a general rule, dab temperatures are set between 315℉ to 900℉. Below 315℉ is usually too low to vaporize cannabis concentrates. And above 900℉ can release carcinogens as well as a harsh, burnt vapor.
How do I know what temperature to vape?
You'll typically want to vape 10° F (or 1° C) hotter than the average boiling point of the desired terpenes and/or cannabinoids, but be aware that it can slightly vary with different devices or strains. If you're vaping in the lower temperature range, don't throw out your already vaped bud.
What is the best wattage to vape at?
On the contrary, even 10 watts is sufficient to guarantee a satisfying vape, which may be ideal for new vapers. As you become more experienced, it's safe to say that vaping starts to shine between the range of 40 and 50 watts.
What is vape gear?
Vape gear, like vape pens and counter-top vaporizers, operates at much lower temperatures than your typical open flame. In fact, some vaporizers allow you to dial in exactly the temperature you want. This prevents the cannabinoids you need from literally going up in smoke.
What temperature does a BIC burn?
When you light a match or flick your Bic, the flame produced is, at minimum, 600 ℉. That’s hot! So hot, in fact, that it’s actually destroying a portion of the cannabinoids in your pot. That’s bad! A normal flame can do so much damage because most cannabinoids begin to boil at half (or even a third) of that 600 ℉.
Vapor Devices For Temp Control
Not all vape mods or e-cig devices are capable of temperature control vaping. If looking for a vape mod that is capable of temp control, look for the TC designation. Also look at the device specs.
Best Mods For Temp Control
There are so many excellent mods for temp control these days! Chip technology has advanced rapidly in recent years. The new Smok Species vape mod is a prime example of a company that has come a long way making better, and more consistent temp control devices. Vaporesso and Geekvape are also excellent.
Best Type Of Coil For Temperature Control Vaping
Nickel, Titanium, and stainless steel all do an excellent job of temperature controlled vaping. However, my favorite is stainless steel. Stainless Steel is the only type of coil wire that works in both TC mode and variable wattage mode.
Vape Juice For Temp Control Vaping
Temp control vaping is done with atomizer less than 1.0 ohms of resistance. The type of vape juice ingredients used for vaping with atomizers less than 1.0 ohms are different than what is used for standard vaping. The best vape juice for temp control vaping are VG e-liquids. It is our view that the best VG/PG ratio is 80 VG and 20 PG.
What is TC in vaping?
Lots of new vape mods have Temperature Control (TC) that automatically adjusts the power output of the battery in order to maintain a steady temperature. Not only is TC far safer way of vaping but it is actually far more enjoyable, allowing you to take longer drags to pump out those big oh’s you’ve always wanted to do.
What is the middle ground for vaping?
Titanium or Ti on the periodic table is considered to be the middle ground for vaping. It has a low resistivity, meaning you can build exciting coils that taste insane.
How does a vape work?
How does vape work? (brief and rudimentary guide) Inside your vape is a metal coil. Around the coil is cotton. The cotton is drenched in vape juice. A current (electricity) passed from the battery at the bottom through the coil when you press the main button.
What happens if you run out of juice in a vape?
Without TC, if your vape is running out of juice the power is left unchanged the cotton would start to heat up more or even burn. This is something that wattage based vapers may experience quite a lot as the power does not change and the temperature continues to rise!
How does vaping change your experience?
Depending on the flavour , the entire experience of vaping is changed by changes in temperature. Some flavours of ejuice are drastically affected - in a bad way, while others may come to life with the addition of temperature. With vaping a lot of it is about trying new things -- provided that you’re not putting yourself in danger.
Does SS vape work?
SS works in high power modes, meaning that you could keep your vape at a much higher temperature. It does not get damaged by these high temperatures as it is an incredibly durable material.
Is it safe to use nickel in vapes?
However, Nickel is easier to control and that’s why people still use it - making for a safer vape. Also, if you have an automatic TC system, nickel can be used safely as it should stick to the middle/lower end of the ideal temperature range. Therefore, Ideally, if you have a nickel vape, you are best off sticking in the middle/lower end ...
What is temperature control?
Temperature control is probably the most important innovation in vaping since the first variable voltage/variable wattage devices. It involves setting a maximum temperature for the vape that the coil will not exceed.
How does temperature control work?
Temperature control or TC works by using a notion called the thermal coefficient. The thermal coefficient is a property of certain materials to have their electric resistance increases or decrease depending on the temperature. Therefore by reading the resistance multiple times a second, the mod is able to also precisely estimate coil temperature.
What do I need to start using Temp Control?
To experiment temperature control you need two things: a box mod that’s TC enabled and a coil made from Nickel, Titanium or Stainless Steel.
How to vape in temperature control mode?
Most TC enables box mods have predefined profiles for Nickel (Ni), Titanium (Ti) and Stainless Steel (SS). Knowing the material your coil is built from will help you select the correct profile. Note that it is extremely important to use the appropriate setting for the best results.
Setting the right vaping temperature
Setting the right vape temperature might seem a bit tricky at first. However once you get the hang of it you’ll see it’s a very easy process. Most people vape between 392°F - 480°F (200 - 250°C), as this gives the best results in terms of vapor quality and flavor.
Does TC vaping kill dry hits?
This is one of the main reasons people use TC vaping. It basically kills dry hits. Providing you have set up the tank correctly, with TC vaping you should never experience a dry hit ever again.
Can you put a mech mod on a vape?
In wattage mode, or when you’re using a mech mod, it is all too easy to put needless strain on your vape batteries. And doing this for prolonged periods of time can and will cause problems – and some are pretty scary.
Does TC vaping make coils last longer?
Another BIG benefit is how TC vaping effects your coils. Once again, because it isn’t pushing them too hard, the load they experience on a day to day basis is much less and this means they last a lot longer.
Does TC vaping double battery life?
Because of the limited nature of power delivery, TC vaping will net you almost double the battery life from your vape mod. That’s right: double the battery life versus standard, wattage vaping.
What gauge wire is used for Clapton coils?
Some of the most common gauges used for single-strand coil builds are 28, 26, and 24, and thinner wire used in the exterior of Clapton coils is usually between 40 and 32 gauge. There are others of course, and even odd number gauges.
Why do you need a TC wire?
Wires suitable for TC are chosen because of their Temperature Coefficient of Resistance (TCR). The TCR of the vaping wire is the increase in resistance of the wire as temperature increases. The mod knows the cold resistance of your coil, and the material you are using.
What wires are used for power mode?
Most vapers prefer power mode: it is just simpler. Kanthal, stainless steel, and nichrome are the three most popular power mode wires right now, and you might be wondering what would be the best one for you. Again, take note that if you have (or suspect you may have) a nickel allergy, then you should not vape on nichrome coils, ...
What is the difference between a 32 gauge coil and a 24 gauge coil?
When comparing coils with the same ID, number of wraps, and material used, a coil made with 32 gauge wire will be of much higher resistance than a 24 gauge coil. Another factor to take into account when it comes to wire resistance is the internal resistance of the coil material.
What is wire gauge?
Wire gauge. The first basic characteristic of any wire is the actual diameter of the wire. It is commonly called the wire “gauge” and expressed as a numerical value. The actual diameter for each wire isn’t really important. What matters is that as the wire gauge number increases, the wire diameter gets smaller.
What are the characteristics of wire?
These are the diameter (or gauge) of the wire, its resistance, and the ramp time of different materials.
Can you vape with nichrome coils?
Again, take note that if you have (or suspect you may have) a nickel allergy, then you should not vape on nichrome coils, and maybe you should also avoid stainless steel. Kanthal has been the choice of most vapers for a longer time, due to its ease of use and higher resistance.
What does TCR mean in vaping?
The TCR represents the "WIRE" only, and that value doesnt change just because you put it in a different mod, or built a different geometry coil. Dial in your Mod to be as accurate as possible. Then tweak the temp setpoint if need be to get an identical vape perception. Vaping is not a "set it and forget it" process.
What battery does the DNA 75C use?
is as accurate as possible but also uses single battery and uses 20700 or 21700 battery for its long run time, and easy to carry in pocket. The best that fits the bill is DNA 75C Mods and there is only a handful of them that fit this specifications.
