Depending on the vape, coils vary in size. For coils under 2mm in diameter, we use the term micro. Anything larger than that would be a macro coil.
What size wire do I need for a vape coil?
Wire Gauge When talking about vape wire size, vapers are referring to gauge, the actual diameter of the wire. Most popular gauges that vapers use are 32, 30, 28, 26, 24, and 22 – a majority of vape coils, even the most eccentric ones and used in the best vapes, can be built with these.
How much vapor should I expect to get from a coil?
If you’re heating the coil at 5W then you probably won’t produce much vapor. If your coil is 1.6ohms though I’d expect a fair amount of vapor anywhere above 15W. Did you dry burn your coil to make sure there were no hotspots?
What should you look for when buying vape coils?
The variables to consider when looking at vape coils are the wire material, resistance, and the shape or style of the coil. Each of these components are combined in any given coil to provide it with its unique profile and affect its tank compatibility, ramp-up, flavor production, vapor production, and style of vaping (i.e. DTL or MTL).
What resistance coil should I build for vaping?
Rounded to Half Wraps Wire Length Resistance of Each Coil Resistance of Build Deck Surface Area of Coil Current Drain from Battery Vaping Power @ 4.2V FAQs What resistance coil should I build? A typical coil build resistance usually ranges from around 0.1ohms to 2.5ohms. However, this is always dependent on the mod and/or tank you’re using.
What is the ultimate guide to vape coils?
What is the best wire for vaping?
What are the different types of vape wires?
What gauge is used for vaping?
What are the two modes of vaping?
How to wrap a coil?
Is Kanthal wire good for coils?
See more
How do I know what coil to buy for my vape?
The coil resistance can be adjusted according to how many wraps of a wire there are, the gauge and type of wire. You'd then measure this resistance with the help of an Ohmmeter. Low resistance coils produce warmer vapour and larger clouds, whereas high resistance coils produce a cooler vape with less current.
Is 0.6 or 0.4 coil better?
I found the 0.6-ohm best around 12 watts and the 0.4-ohm best around 25 watts. I used 70/30 3 mg juice in the 0.4-ohm coil and the flavor was good, but the nicotine was low for my tolerance as I'm used to vaping 3 mg at 100+ watts. But that's a personal thing, and the flavor was good for a 25-watt coil.
What is the difference between a 0.6 and 1.2 coil?
The 0.6ohm coil is perfect for hybrid sub vaping that want more clouds and low nicotine dosage. The new 1.2ohm coil is for true mouth to lung vaping and perfect for high nicotine dosage without flavourloss.
What strength coil do I need?
The ohms level is a way of measuring a level of electrical resistance. The standard or regular level of ohm when it comes to vaping and your clearomizer is between 2.4 and 2.8. This is by far the most common ohm range chosen by those looking for replacement coils, with the most commonly chosen being 2.5.
How many watts can a 0.4 ohm coil?
For example, a 0.4-ohm mod may recommend a 23 - 28 watt setting, and a 0.8-ohm mod may recommend you use up to 35 watts. Some recommendations can go much higher (e.g., 200 watts). Sub-ohm devices work best when using a high VG vape liquid (e.g., a VG/PG ratio of 70/30).
What's the difference between 0.6 and 0.8 coil?
If you want a bit more flavor and juice with a bit less nicotine but still want a MTL draw, you can use the 0.8 ohm mesh coil. If you're chasing clouds, the 0.6 ohm mesh coil offers some impressive cloud production for a pod vape and wicks fast enough to handle thicker vape juice.
What wattage should I vape at 0.6 ohm?
12-25 wattsIn contrast, the 0.6ohm coils have a recommended wattage of 12-25 watts. They are therefore classed as restricted direct to lung (RDL) coils, offering less clouds but conserving your battery and e juice.
What is the best wattage for a 1.2 ohm coil?
between 10-12 wattsA 1.2ohm coil is perfect for mouth-to-lung vaping and performs especially well when paired with the elongated drip tip option and used between 10-12 watts.
Can I use 0.4 ohm coil for salt Nic?
THE BEST KIND OF VAPE KITS TO USE WITH NIC SALTS: Things like pod kits and vape pens are perfect, just make sure you're using something with a coil that's at least 1.0ohm in resistance.
What is the difference between 0.8 and 1.0 coil?
These coils are available as two variants: 0.8 Ohm mesh coil & 1.0 Ohm standard MTL coil. The 0.8 Ohm mesh coils produce more vapour, providing a restricted DTL (Direct To Lung) inhale. The standard 1.0 Ohm coils deliver a longer lasting MTL (Mouth To Lung) vape.
What is best wattage for vaping?
What most people overlook, though, is the fact that even 10 watts is sufficient to guarantee a satisfying vape, and some users are right at home with this wattage. By and large, though, we could say vaping starts to get more exciting between the range of 40 and 50 watts.
What is the best wattage for a 0.5 ohm coil?
Always follow the manufacturer's guidelines for the appropriate wattage range for a coil. You will usually find the range on the packaging, in the product description, or in the technical specs. For example, a 0.5 ohm coil will vape best at 15 watts up to 50 watts.
What is the ultimate guide to vape coils?
The Ultimate Guide to Vape Wires and Vape Coils. You won’t be tapping in the dark like so many other beginner builders, and your first coil will be right as rain and ready to fire. At one point or another, a serious vaper will try a hand at building their coils – out of economic reasons, engineering prowess, or just pure fun.
What is the best wire for vaping?
Stainless Steel Wire. The only vape wire that can pull double duty (work in both wattage and TC modes) is the stainless steel wire. It’s perfect for vapers that haven’t made up their mind between TC and wattage mode or fail to check the modes they’re firing in regularly.
What are the different types of vape wires?
Types of Vape Wires. Shutterstock / Hurricanehank. There are five different types of vape wires generally used: Kanthal Wire (FeCrAl) NiChrome. Stainless Steel. Nickel. Titanium. As you can tell, only one vape wire is versatile enough to be used in both vaping modes, and that’s Stainless Steel.
What gauge is used for vaping?
When talking about vape wire size, vapers are referring to gauge, the actual wire diameter. The most popular gauges that vapers use are 32, 30, 28, 26, 24, and 22 – a majority of vape coils, even the most eccentric ones and used in the best vapes, can be built with these. The important thing to remember here is that the bigger ...
What are the two modes of vaping?
You know by now that there are two different modes of vaping – the wattage mode and the temperature control mode . Of course, it would be great if we could just use any old vape wire type for both of these modes.
How to wrap a coil?
Wrapping the coil – cut 4 – 5 inches of wire and use your screwdriver to make wraps. Start near the shaft of the screwdriver so you can hold the wire in place with your thumb. Continue wrapping it around the screwdriver, making sure that your wraps are as close to one another without overlapping.
Is Kanthal wire good for coils?
Kanthal wire is especially good for single coil builds, which are not extravagant but get the job done when you’re not in the mood for something fancy and time-consuming. Add to that that it holds shape well when rewicking (which means that you can use a Kanthal coil a good long time) and have a fan favorite.
What is a vape coil?
The vape coil is a lot like the heart of your mod or e-cigarette kit, it’s the unit responsible for heating up the e-liquid and vapourising it. The coil resistance can be adjusted according to how many wraps of a wire there are, the gauge and type of wire. You’d then measure this resistance with the help of an Ohmmeter.
How to replace a coil in a tank?
However, there are a few general steps you can follow regardless of which variety you have when you’re replacing an old coil. Unscrew the battery from the tank. Turn the tank upside down and unscrew the metal bottom cap. Unscrew the coil head from the bottom cap and screw the new coil into it.
What is the difference between a low resistance coil and a high resistance coil?
Low resistance coils produce warmer vapour and larger clouds, whereas high resistance coils produce a cooler vape with less current. Despite being so integral, the coil is a fairly simple mechanism. It’s constructed from a coiled wire or a piece of mesh and some wicking material (usually cotton).
Why is my vape coil burning?
The reason for this is that the tank is running too hot for the coil to manage it. Sometimes chain vaping can also affect the lifespan of your coil as it can get too hot and start to burn the coil. If you inspect your coil and wicking material more closely, you’ll see that the cotton is often discoloured and burnt.
What is Kanthal coil?
KANTHAL COIL. Kanthal is a combination of iron, chromium and aluminium and is a popular wire used in both pre-made and home made coils. It has a super quick ramp up time and as such, creates impressive amounts of vapour. Kanthal coils are only suitable to be used in wattage mode.
What is ceramic coil?
A ceramic coil material is porous, so air passes through it particularly well and offers a super smooth draw. Many reviewers find that the ceramic material brings out the flavour more than other materials. They tolerate high wattages well too so they’re a great addition to the more high-powered mods on the market. Ceramic coils have also been touted to last longer than cotton coils and help prevent dry hits.
Can you use VG in sub ohm vape?
The flavour of your e-liquid, cloud production and functionality of your vape will suffer if you neglect it. This rule is especially relevant for Sub Ohm vapers as they typically use higher VG liquids which are thicker and gum up coils more quickly.
Needed Materials
On the contrary, with the right tools, making them yourself is rather simple. Of course, you'll need the materials. However, once you've got those, the knowledge is readily accessible.
Needed Materials
Above all, wires are the most important part of this process. You'll be working with them throughout. In some instances, thicker wires produce more desirable results. However, on other occasions, the opposite will be true.
Macro vs. Micro Coils
Depending on the vape, coils vary in size. For coils under 2mm in diameter, we use the term micro. Anything larger than that would be a macro coil. Either way, understanding the terminology is a vital advantage.
Single vs. Multiple
With certain vapes, installing more than one coil is possible. Check out the instructions that were included with yours. That way, if you need to build multiple, you'll know ahead of time.
Basic Instructions to Build Your Coil
So, each vape will be built a bit differently. However, in most circumstances, the following steps should suffice. Unless you have a specialty vape, the specifics don't change much between products.
SMOK Nord Replacement Coils
Perhaps, your tastebuds love the flavor of salt-based nicotine. If that is the case, you would need something suitable. So, with that in mind, look at these options. Suppose you want a higher resistance coil. If so, then they've got you covered. On the other hand, for those who prefer lower resistance, they got something for you as well.
SMOK Baby V8 Mesh Replacement Coils 5 Pack - SMOK
Delivering between 40 and 80 volts, these coils are a beast in the machine. So, when you want something more than powerful enough for the job, grab a pack of these. Put them in your vape. Then, you'll appreciate all that power, packed away.
What is coil in vape?
The coil is a component inside the atomizer. But as we know, the world of vape lingo is vast and when you say coils, we know what you mean. If your vape mod is the body, atomizer heads are the heart, a fundamental part of your vaping experience.
What are atomizer coils made of?
Most atomizer coils are made from Nichrome or Kanthal. But there are different wire types that some vapers use. Nickel, Titanium and Stainless Steel are also available, but less popular. These tend to be used for temperature control vaping and aren’t suited to all e-cigs. But that is for another time.
How does an atomizer head work?
An atomizer head converts energy from the e-cig battery and heats the coil inside, this then vaporises e-liquid that is soaked into the wicking material, which is then inhaled by you.
What is the resistance of an atomizer?
Well atomizer heads have an electrical resistance value measured in ohms (Ω). Depending on the amount of electrical resistance will depend on what ‘ohm’ your atomizer head is. Atomizer heads generally fall into two categories. High and low resistance.
Do vapers use e-liquid?
Some vapers prefer an atomizer head that lasts a long time, doesn’t use much e-liquid through the day and they don’t look for larger clouds of vapour. Other vapers are satisfied exhaling large clouds of vapour and are happy topping up with juice more frequently. The best thing to do is experiment.
What is a vape coil?
Vape coils are the replaceable element in vape kits and tanks. It is the coil that takes the power from your vape battery and turns it into heat, which is then used to turn e-liquid into vapour. Inside a standard coil model, you will find a length of coiled wire wrapped around an absorbent wick. The wire creates heat, while the wick absorbs ...
How to tell if a coil needs changing?
The quickest way to tell if your coil needs changing is by taste, if you notice a taste like burnt metal or fibre then we recommend replacing it straight away. If the cotton in the coil has taken on a dark brown or black colour it means that it has begun to deteriorate.
What is rebuildable coil?
Rebuildable coils have been created for the purpose of being used with rebuildable atomisers. They require a far greater knowledge to use safely, including knowledge of Ohm’s Law, battery safety and general vape knowledge. Rebuildable coils are the pinnacle of customisability, as they allow you to pick an exact resistance and use metals ...
What is mouth to lung vaping?
Mouth to lung vaping describes the process of inhaling vapour into your mouth and then carrying it into your lungs, the same way you would smoke a cigarette. This style is especially popular amongst new vapers as it feels very familiar.
How is coil resistance measured?
A coil’s resistance is measured in Ohms. Ohm’s Law describes the relationship between current, power and resistance, and is very useful to understand as it directly relates to vapour production, which can help you decide which coil is right for you. A common analogy for understanding Ohm’s Law is to imagine the plumbing in your home.
What to do if your coil is loose?
On your coil you may see small rubber rings, called O-rings, they act as a seal to ensure your tank doesn’t leak when it’s filled with e-liquid. Before installing your coil check that the O-rings are intact.
What are the ingredients in e-liquid?
The two main ingredients of e-liquid are VG (Vegetable Glycerin) and Propylene Glycol (PG), which are both widely found in food and medicine. The levels of VG and PG will always add up to 100%, for example, 70% VG / 30% PG or 50% VG / 50% PG.
What makes a vape warmer?
Warmer vapor and larger clouds are produced by low resistance coils while a cooler vape with less current is produced by high resistance. Despite its importance, the coil has a fairly simple mechanism. It is constructed from a coiled wire or a piece of mesh as well as wicking material (typically cotton).
What is dual coil atomizer?
Another new one are dual coil atomizers that use an equal amount of electricity to both coils, which help to lower the overall resistance. The dual coils use so much power, which begs the question “which battery do you need?” rather than “what tank do you need?”. With RDAs, there are different kinds of decks, some of which are equipped for dual or even triple coils which allows for better production of vapor.
What is nichrome vape?
Nichrome combines 80% Chromium and 20% Nickel, which allows it to heat up much faster compared to Kanthal, producing large amounts of cloud and providing a pleasant, warm vape. Nichrome is only used in wattage mode and Sub Ohm vapers love it because of this along with its quick ramp up time.
Can you make or mar your vape experience?
You can make or mar your vaping experience just by picking the right coil, which is why it’s important that you know what types there are, what their benefits are and the properties of each type. It will greatly help you by using this guide as a starting point, and then researching your coil before using it. Don’t forget to check if it is compatible with your vape pen or dry herb vaporizer device before using.
How to wrap a coil?
To wrap a coil, you’ll need either a drill bit, a screwdriver or (ideally!) a coil jig to wrap the wire around. The size of whatever you use dictates the inner coil diameter.
What type of wire is used for variable wattage?
Kanthal A1 and Nichrome N80 are the two types of wire used for Variable Wattage mode only. Stainless Steel (316) can be used in either Variable Wattage or Temperature Control (TC) mode.
How to prime a vape coil?
Priming Vape Coils. Step 1: When you’ve taken your coil out of its packaging, locate the exposed bits of cotton on the side. There are probably two, opposite each other, and they’ll most likely look like white circles. Step 2: Get your vape e-juice, and place a few drops on one of the cotton spots.
How does a sub ohm coil work?
For sub-ohm coils, there are two key steps you need to take part in: priming and then breaking in your coil.
Can you break in a sub ohm coil?
Breaking in a sub-ohm coil is very similar to letting a valve guitar amp heat up—you need to slowly get it ready to be used, rather than getting it to do its purpose straight away. Not breaking in can reduce the coil’s lifespan and give you unpleasant hits.
Does priming a coil help with longevity?
Priming is essentially making sure the coil you use is fully soaked in e-liquid. This lets it have a more consistent taste, minimizing popping and dry hits . The design on some newer models takes longer for the e-liquid to be absorbed ...
What is the ultimate guide to vape coils?
The Ultimate Guide to Vape Wires and Vape Coils. You won’t be tapping in the dark like so many other beginner builders, and your first coil will be right as rain and ready to fire. At one point or another, a serious vaper will try a hand at building their coils – out of economic reasons, engineering prowess, or just pure fun.
What is the best wire for vaping?
Stainless Steel Wire. The only vape wire that can pull double duty (work in both wattage and TC modes) is the stainless steel wire. It’s perfect for vapers that haven’t made up their mind between TC and wattage mode or fail to check the modes they’re firing in regularly.
What are the different types of vape wires?
Types of Vape Wires. Shutterstock / Hurricanehank. There are five different types of vape wires generally used: Kanthal Wire (FeCrAl) NiChrome. Stainless Steel. Nickel. Titanium. As you can tell, only one vape wire is versatile enough to be used in both vaping modes, and that’s Stainless Steel.
What gauge is used for vaping?
When talking about vape wire size, vapers are referring to gauge, the actual wire diameter. The most popular gauges that vapers use are 32, 30, 28, 26, 24, and 22 – a majority of vape coils, even the most eccentric ones and used in the best vapes, can be built with these. The important thing to remember here is that the bigger ...
What are the two modes of vaping?
You know by now that there are two different modes of vaping – the wattage mode and the temperature control mode . Of course, it would be great if we could just use any old vape wire type for both of these modes.
How to wrap a coil?
Wrapping the coil – cut 4 – 5 inches of wire and use your screwdriver to make wraps. Start near the shaft of the screwdriver so you can hold the wire in place with your thumb. Continue wrapping it around the screwdriver, making sure that your wraps are as close to one another without overlapping.
Is Kanthal wire good for coils?
Kanthal wire is especially good for single coil builds, which are not extravagant but get the job done when you’re not in the mood for something fancy and time-consuming. Add to that that it holds shape well when rewicking (which means that you can use a Kanthal coil a good long time) and have a fan favorite.
What Are The Different Types of Coil?
- MTL/”mouth-to-lung” coil
MTL or “mouth-to-lung” coils are designed to replicate the experience of smoking a traditional cigarette. This means a tight draw and low power output. Generally, MTL coils are designed to be used with higher nicotine strength e-liquids, to further simulate the “throat hit” of a cigarette. Yo…
Round Wire vs Mesh – What’s The difference?
- Traditional round wire coils and coils made using mesh strips are both extremely common, but what’s the difference and which one is right for you? Typically, round wire is used for lower-wattage coil heads. This is because they perform very well at low temperatures. Also, the manufacturer can easily tweak performance by changing the wire thickness or number of wraps…
Duoprime – A New Era For Coil Design
- At Innokin, we’re always looking for ways to improve the vaping experience. As mentioned previously, mesh coils are excellent at increasing e-liquid absorption. What if there was a way to increase wicking efficiency even more using mesh strips? With this in mind, our engineers designed DuoPrime technology. DuoPrime works by implanting an outer layer of mesh between …