What size coil do I need for my vape?
With a 1.2 ohm coil you’ll probably be looking at around 15W – 25W for a satisfying vape but it really depends on personal preference. If you’d like any tips on building your coils then check out our guide on coil building.
What are vape coils?
WHAT ARE COILS? Vape coils are the replaceable element in vape kits and tanks. It is the coil that takes the power from your vape battery and turns it into heat, which is then used to turn e-liquid into vapour.
What size Kanthal should I use for vape coils?
We recommend using some basic 26-gauge Kanthal for your first few vape coil builds. It will fit fine in most atomizers and it’s very easy to work with. It is worth noting that most atomizers nowadays can easily fit 3 mm coils and, as a result, you will rarely see people referring to coils as micro/macro.
How much vapor should I expect from a 5W coil?
If you’re heating the coil at 5W then you probably won’t produce much vapor. If your coil is 1.6ohms though I’d expect a fair amount of vapor anywhere above 15W.
How do I know what coil to use in my vape?
The coil resistance can be adjusted according to how many wraps of a wire there are, the gauge and type of wire. You'd then measure this resistance with the help of an Ohmmeter. Low resistance coils produce warmer vapour and larger clouds, whereas high resistance coils produce a cooler vape with less current.
Does coil diameter affect flavor?
Larger coil diameters also mean a cooler draw. One drawback is that the flavor of the e-liquid tends to be less bold with a large coil. That's because the amount of vape juice that absorbs into the wick creates a less concentrated taste.
What's the difference between 0.6 and 1.2 coils?
The 0.6ohm 316L stainless steel coil is good flavour and vapour production, while the 1.2ohm Kanthal coil is a perfect if you prefer high nicotine ejuice. The Aspire PockeX heads lead a new revolution in coil technology.
How many watts do I need for a .23 ohm coil?
Wattage range 20-45W.
Which is thicker 26g or 28g?
Wire Gauge and Resistance As a rule of a thumb, the higher the value of the gauge, the thinner the wire is. As an example, a 28 gauge wire will be thinner than a 26 gauge wire, but thicker than a 30 gauge wire. In addition, a thicker wire will have a lower resistance while a thinner wire will have a higher resistance.
What Ohm is best for flavor?
around 0.3ohmsThe sweet spot for getting a balance of vapour and flavour is around 0.3ohms. Depending on your coil choice you'll want to up the wattage from anywhere between 50 and 100 watts.
Is 0.6 or 0.4 coil better?
I found the 0.6-ohm best around 12 watts and the 0.4-ohm best around 25 watts. I used 70/30 3 mg juice in the 0.4-ohm coil and the flavor was good, but the nicotine was low for my tolerance as I'm used to vaping 3 mg at 100+ watts. But that's a personal thing, and the flavor was good for a 25-watt coil.
Is 0.8 ohm or 1.2 ohm better?
They are both suitable for MTL (mouth-to-lung), which is very rare, with the only difference being that the 0.8Ω puts out warmer vapor than the 1.2Ω coil. The pods hold 2ml of e-liquid and attach to the battery section via a pair of powerful magnets, and feature top filling.
What wattage should I vape at 0.6 ohm?
12-25 wattsIn contrast, the 0.6ohm coils have a recommended wattage of 12-25 watts. They are therefore classed as restricted direct to lung (RDL) coils, offering less clouds but conserving your battery and e juice.
How many watts is a 0.25 ohm coil?
45-57W25 - 0.25Ω Ohm (45-57W) new.
Is 1.4 coil for salt Nic?
Most pod mod vapers find that somewhere between 1.0 and 1.4 ohms is the sweet spot when it comes to 50mg salt nic e-liquids. In most cases, anything lower will result in a burnt taste and harsh sensation, and anything higher will produce very little vapor, not to mention a weak nicotine hit.
What wattage should I vape at 0.26 ohm?
61.54Massively sub-ohmResistance (Ω)Avg voltsWattage produced0.244.066.670.254.064.000.264.061.540.274.059.2637 more rows•Jun 8, 2015
What Is In A Name? For Coils, Everything
Wire is very important when it comes to vaping, and as Shakespeare put it, ‘The name of a thing does not matter as much as the quality of the thing.’ Wires are what your coil is made of and the difference in wires makes a big difference in the output of the vapor the coil produces.
When Should You Change Out Your Coil?
As mentioned at the start of this vape coil guide, your coils have the shortest lifespan in your device, not counting the e-liquid since that is technically outside of your device and just added. You’ll know when to change with your eyes, ears, and taste when something is a little off from your typical vaping experience.
The Best Vape Coil Wire Bang For Your Buck At VaporDNA
We have a wide range of coils, as well as other vaping device accessories to make your vaping experience the best it can possibly be. If you are interested in a new device we have a great selection of those as well and all of the popular e-liquids that you have been hearing about and wanting to try.
How to build a coil for a RDA?
First, examine the deck and see if it is a dual or a single-coil atomizer. Then check the size of the deck and see how large your build can be—you don’t want your coils to touch the top cap as this will cause a sort.
Who makes coil jigs?
Some of the best-known coil jigs are manufactured by Coil Master, UD, and Kuro Concepts. Wrapping coils using a coil jig is a fairly straightforward process. If you want to learn more, watch Sherlock Hohms’ video where he shows how to easily wrap a 2.5 mm coil using a coil jig.
How are micro and macro coils created?
Micro and macro coils are created by taking a single piece of wire and wrapping it around a screwdriver, drill bit, or coil jig. The difference between a micro and a macro coil is the inner diameter of the coil. It’s that simple.
What is macro coil?
Macro: a macro coil build is a coil that has an inner diameter that’s 2.5 mm and above. The bigger the inner diameter of the vape coil, the higher its resistance, and vice versa. Likewise, the thicker the gauge of wire used, the lower the resistance will be.
Why do you need to have two coils?
When doing a dual coil build, it’s essential for both coils to be identical in size and form, to ensure that they heat up properly. Dual-coil builds obviously create more vapor than a single coil of the same specs, but require double the power to perform.
What do you use to pinch coils?
Wire: any of the vaping wires would do. Flush cutters: wire cutters that can cut close in small spaces. Ceramic tweezers: to pinch your coils while pulsing. Fine tip tweezers: to fluff your cotton and place it inside the wick ports. Small metal rod: a small screwdriver, or coiling tool.
How to save money on vaping?
One of the best ways to save money in vaping is to build your own coils. Rather than buying disposable coil heads every week, you can make your own. It’s a fun hobby that vapers not only take pride in, but get to enjoy the fruits of their labor. The way to get good at it is through practice. Although, it’s perfectly reasonable for first-time ...
What is rebuildable coil?
Rebuildable vape coils take flavour and cloud production one step further than Sub Ohm / Direct to Lung coils. Experienced vapers with good knowledge of Ohm’s law and battery safety may choose to rebuild coils in order to use specific resistance levels and other metals, such as Titanium or Nickel. In turn, this allows people to create highly personalised custom vaping sessions that can’t be experienced when using other coils.
What is DTL vaping?
DTL is considered to be the more advanced method of vaping, which involves inhaling vapour directly into the lungs with one 3-5 second long draw. Sub Ohm / Direct to lung coils are low resistance (less than 1.0 Ohm) with the ability to produce larger vapour clouds.
What is MTL coil?
MTL refers to the beginner-friendly method of vaping, which involves slowly drawing vapour into the mouth before pausing and inhaling it into the lungs. Mouth to lung coils are high resistance (1.0 Ohm or higher), which means they produce less vapour but are able to provide enhanced e-liquid flavour. Due to their low vapour production, MTL coils also tend to last longer.
What makes a vape warmer?
Warmer vapor and larger clouds are produced by low resistance coils while a cooler vape with less current is produced by high resistance. Despite its importance, the coil has a fairly simple mechanism. It is constructed from a coiled wire or a piece of mesh as well as wicking material (typically cotton).
What is nichrome vape?
Nichrome combines 80% Chromium and 20% Nickel, which allows it to heat up much faster compared to Kanthal, producing large amounts of cloud and providing a pleasant, warm vape. Nichrome is only used in wattage mode and Sub Ohm vapers love it because of this along with its quick ramp up time.
What is dual coil atomizer?
Another new one are dual coil atomizers that use an equal amount of electricity to both coils, which help to lower the overall resistance. The dual coils use so much power, which begs the question “which battery do you need?” rather than “what tank do you need?”. With RDAs, there are different kinds of decks, some of which are equipped for dual or even triple coils which allows for better production of vapor.
Can you make or mar your vape experience?
You can make or mar your vaping experience just by picking the right coil, which is why it’s important that you know what types there are, what their benefits are and the properties of each type. It will greatly help you by using this guide as a starting point, and then researching your coil before using it. Don’t forget to check if it is compatible with your vape pen or dry herb vaporizer device before using.
What is coil in vape?
The coil is a component inside the atomizer. But as we know, the world of vape lingo is vast and when you say coils, we know what you mean. If your vape mod is the body, atomizer heads are the heart, a fundamental part of your vaping experience.
What are atomizer coils made of?
Most atomizer coils are made from Nichrome or Kanthal. But there are different wire types that some vapers use. Nickel, Titanium and Stainless Steel are also available, but less popular. These tend to be used for temperature control vaping and aren’t suited to all e-cigs. But that is for another time.
How does an atomizer head work?
An atomizer head converts energy from the e-cig battery and heats the coil inside, this then vaporises e-liquid that is soaked into the wicking material, which is then inhaled by you.
What is the resistance of an atomizer?
Well atomizer heads have an electrical resistance value measured in ohms (Ω). Depending on the amount of electrical resistance will depend on what ‘ohm’ your atomizer head is. Atomizer heads generally fall into two categories. High and low resistance.
Do vapers use e-liquid?
Some vapers prefer an atomizer head that lasts a long time, doesn’t use much e-liquid through the day and they don’t look for larger clouds of vapour. Other vapers are satisfied exhaling large clouds of vapour and are happy topping up with juice more frequently. The best thing to do is experiment.
What is a vape coil?
Vape coils are the replaceable element in vape kits and tanks. It is the coil that takes the power from your vape battery and turns it into heat, which is then used to turn e-liquid into vapour. Inside a standard coil model, you will find a length of coiled wire wrapped around an absorbent wick. The wire creates heat, while the wick absorbs ...
How to tell if a coil needs changing?
The quickest way to tell if your coil needs changing is by taste, if you notice a taste like burnt metal or fibre then we recommend replacing it straight away. If the cotton in the coil has taken on a dark brown or black colour it means that it has begun to deteriorate.
What is rebuildable coil?
Rebuildable coils have been created for the purpose of being used with rebuildable atomisers. They require a far greater knowledge to use safely, including knowledge of Ohm’s Law, battery safety and general vape knowledge. Rebuildable coils are the pinnacle of customisability, as they allow you to pick an exact resistance and use metals ...
What is mouth to lung vaping?
Mouth to lung vaping describes the process of inhaling vapour into your mouth and then carrying it into your lungs, the same way you would smoke a cigarette. This style is especially popular amongst new vapers as it feels very familiar.
How is coil resistance measured?
A coil’s resistance is measured in Ohms. Ohm’s Law describes the relationship between current, power and resistance, and is very useful to understand as it directly relates to vapour production, which can help you decide which coil is right for you. A common analogy for understanding Ohm’s Law is to imagine the plumbing in your home.
What to do if your coil is loose?
On your coil you may see small rubber rings, called O-rings, they act as a seal to ensure your tank doesn’t leak when it’s filled with e-liquid. Before installing your coil check that the O-rings are intact.
What are the ingredients in e-liquid?
The two main ingredients of e-liquid are VG (Vegetable Glycerin) and Propylene Glycol (PG), which are both widely found in food and medicine. The levels of VG and PG will always add up to 100%, for example, 70% VG / 30% PG or 50% VG / 50% PG.
How many strands of wire are needed for a coil?
This will enable you to select either a single strand of wire, or up to four strands running parallel/twisted. The most commonly used is a single strand, however, using more than one strand will reduce the overall resistance or increase the surface area of the coil.
Is each wire type different?
Each wire type has slightly different properties, therefore it’s important that you select the correct type of wire that you’re using, otherwise the overall resistance or wraps shown in the results section won’t be correct.
How to wrap a coil?
To wrap a coil, you’ll need either a drill bit, a screwdriver or (ideally!) a coil jig to wrap the wire around. The size of whatever you use dictates the inner coil diameter.
What type of wire is used for variable wattage?
Kanthal A1 and Nichrome N80 are the two types of wire used for Variable Wattage mode only. Stainless Steel (316) can be used in either Variable Wattage or Temperature Control (TC) mode.
How Do Vape Coils Work?
- Coils, which are sometimes referred to as atomisers, are the component of your vaping device that creates vapour. They are made of three components: the heating element, wicking material and casing. The casing of a coil simply holds everything together and allows for the coil to be ea…
Round Wire vs Mesh – What’s The difference?
- Traditional round wire coils and coils made using mesh strips are both extremely common, but what’s the difference and which one is right for you? Typically, round wire is used for lower-wattage coil heads. This is because they perform very well at low temperatures. Also, the manufacturer can easily tweak performance by changing the wire thickness or number of wraps…
Duoprime – A New Era For Coil Design
- At Innokin, we’re always looking for ways to improve the vaping experience. As mentioned previously, mesh coils are excellent at increasing e-liquid absorption. What if there was a way to increase wicking efficiency even more using mesh strips? With this in mind, our engineers designed DuoPrime technology. DuoPrime works by implanting an outer layer of mesh between …