Are Tobeco coils compatible with my tank?
The Tobeco Super Tank Coils are highly compatible with a wide variety of the tanks that are currently including the 25mm Super Tank, Aspire Atlantis, Aspire Triton, the Freemaxx Starre and the Eleaf iJust2 too. These coils are designed with a vertical Kanthal wire build as well as the four oversized e-liquid ports for improved wicking.
Can I Vape a 50 watt coil?
This coil has a range of 60 - 350 watts. So vaping this coil at 50 watts will produce little to no vapor. Some juices react differently to different wattages so it may impact the flavor. Chances are this will not be a very satisfying vape for you.
What wattage should I vape the Tobeco super tank mini?
I’d vape the Tobeco super tank mini on the 0.2ohm coil anywhere between 60W- 75W. 80W – Verging on a burnt hit for me at this wattage, so I won’t be vaping it any higher. The vapor is also very hot. Again the recommended wattage is way out on this coil. There is no way you can have a good vape at 100W on this 0.5ohm coil head.
What is a good ohm for a vape coil?
0.5 ohm coils will give you a longer battery life, as most people vape on them at around 20–30 watts. 0.2 ohm coils will give you bigger clouds and a better flavor. However, your battery life will suffer, as most people vape around 50–70 watts with this low of an ohm.
What wattage should I vape at 0.5 ohm?
For example, a 0.5 ohm coil will vape best at 15 watts up to 50 watts. Another place you can look to find out the appropriate wattage range is on the coil itself.
What ohms should I vape at?
The standard or regular level of ohm when it comes to vaping and your clearomizer is between 2.4 and 2.8. This is by far the most common ohm range chosen by those looking for replacement coils, with the most commonly chosen being 2.5. This standard level tends to offer the most consistent level for your vape.
What is the best wattage for a 0.4 ohm coil?
25W0.4 ohm RPM Mesh Coils feature a honeycombed mesh design and are best for flavour seeking vapers. Recommended Wattage: 25W.
How many watts can a 0.2 ohm coil take?
0.2 ohm coils - 40 watts to 100 watts.
What is the best wattage for a 0.6 ohm coil?
12-25 wattsIn contrast, the 0.6ohm coils have a recommended wattage of 12-25 watts. They are therefore classed as restricted direct to lung (RDL) coils, offering less clouds but conserving your battery and e juice.
What should my vape settings be?
As a general rule, dab temperatures are set between 315℉ to 900℉. Below 315℉ is usually too low to vaporize cannabis concentrates. And above 900℉ can release carcinogens as well as a harsh, burnt vapor.
What wattage should I vape 50 50?
The 50/50 PG and VG ratio is one of the most common ratios available, alluding to a good balance between flavour, throat hits, and cloud production. It is best used in low-voltage devices below 80 watts for producing bigger clouds but without overpowering flavours.
What's the difference between 0.2 and 0.4 coils?
The lower resistance 0.2 ohm coils allow higher wattage to be used. This said, in this case, the 0.4 ohm coils give much better flavour with the Cleito tank than the 0.2 ohm coils.
What is the best wattage for 0.45 ohm coil?
Available in 0.45 Ohm these vape coils are suited to both high wattage and mid wattage vaping. Fused Clapton coils allow for increased cloud, thanks to its construction and can be used at higher wattages....0.45 Ohm Coil Art Premade Fused Clapton Vape Coils.Coil Resistance0.45ohmWireKanthal2 more rows
How many watts is a .25 ohm coil?
25 - 0.25Ω Ohm (45-57W) new.
How many watts is a 0.33 ohm coil?
The sweet spot for getting a balance of vapour and flavour is around 0.3ohms. Depending on your coil choice you'll want to up the wattage from anywhere between 50 and 100 watts. Clapton and Alien coils usually take a bit more power to ramp up so you'll want to boost the wattage if you're using either of these options.
What wattage should I vape at ohm?
These devices burn at higher temperatures and are intended for use with high VG liquids, producing thicker clouds and releasing more flavour from the e-liquid. A typical wattage range for 0.8-ohm devices is 20 W - 35 W (or sometimes 40 watts - 50 watts).
Is higher or lower ohms better vape?
Lower resistance coils produce more flavour, vapour and heat at a lower voltage than higher ohm coils because they use more watts. For example, if you have a 1.8ohm coil running on 3.7 volts you'll get an output of around 7.3 watts.
What wattage should I vape at ohm?
These devices burn at higher temperatures and are intended for use with high VG liquids, producing thicker clouds and releasing more flavour from the e-liquid. A typical wattage range for 0.8-ohm devices is 20 W - 35 W (or sometimes 40 watts - 50 watts).
Is 1.2 ohm good for salt Nic?
If you're using a coil that's around 1.0ohm to 1.2ohms you'll get a decent nicotine hit and great flavour. For smokers getting through 5 to 10 cigarettes a day: You're still a “moderate smoker” at this level and something like a 6mg or 10mg will work for you too.
What wattage should I vape at 1.5 ohm?
For instance if you use a 1.5 ohm coil then you can get away with anywhere between 8-16 watts, but a . 5 ohm coil needs between 15-30 watts to give you the right amount of power.
How often should I change my vape coils?
With my current set-up, I am changing coils about every 2 weeks, but with the same tank and a different battery, I was changing (the same) coils about every three weeks. You will know when it’s time to change coils… you will notice that vaping doesn’t feel as “crisp” as it does with a new coil, and the vaping experience will deteriorate steadily as the coil ages.
How much does a V12 T12 coil cost?
Chances are this will not be a very satisfying vape for you. From a cost perspective, I can tell you that the V12-T12 coils cost about $10 each. Whereas you can get a coil closer to yo
Why is my wick not getting hot enough to vape?
In that situation, the wick will actually draw & absorb more eliquid than the coil is able to burn off, because it's not getting hot enough.
How long does an expired atomizer last?
If you buy your atomizers ready-built, this is the time to toss the old one and put in a new one. On average, atomizers like this last four to six weeks, but this
What happens when you use a cotton wick atomizer?
With continued use, a concentration of unvaporized liquid builds up in the cotton wick of your atomizer and turns into a syrupy goo that eventually stops air from coming in and flowing through. The goo also settles on the coils, and the heat from the coils encrusts them there.
What is the problem with ceramic atomizers?
My problem with ceramic stuff is that it cracks and breaks. It’s too thin to withstand the heat applied to it for very long. But I certainly haven’t tried them all.
Can you use a regulated mod with a 05 ohm coil?
Without knowing what your power source (mod) is there is no clear way to answer this. A regulated mods (has a chip in it and you can adjust the power) most can not work with a .05 ohm coils and .02 is too low for any style of vaping.
Tobeco Super Tank Mini Intro
In this article we review a mini sub ohm tank – the Tobeco Super Tank Mini, the smaller brother of the Tobeco Super Tank.
Notable Remarks
30W – Not much vapor at 30W 40W – Ok vapor now and you can already taste some nice flavor, looks promising! 50W – Tonnes of vapor already and yet a nice cool vape with good flavor. 60W – Vapor getting slightly warmer now and massive plumes of vapor with delightful flavor. 70W – flavor is immense at 70W! A warm vape now and huge clouds. 80W –Amazing flavor again, but the vapor and drip tip are starting to get seriously hot.
Dislikes
Re-filling from the top is easy, but switching the coil out and putting the tank back together was quite tricky. Taking the tank apart and switching the coil isn’t the issue, it is trying to get the glass and top back on that is tricky.
Likes
The top fill is really easy to use on the super tank mini. The top screws off easily, making it really easy to re-fill the tank with e-juice.
Verdict
I think if you are looking for a sub ohm tank that is a lot smaller in size compared with the others on the market and still has a 22mm diameter, then the Tobeco Mini is the choice for you. It’s top fill, fantastic flavor and clouds made for a fantastic vape. The 4ml tank capacity is also most welcome despite its small size.
Well, im going to have to finally quit vaping after 4 years
Because of the shipping ban, I can no longer get the juice I have been vaping for 2 years. They have stopped shipping them to my local store and I cant order it myself so I am done. I wasn't a smoker before, I just enjoyed vaping, using a nord and buying 1 coil and bottle of juice per month was cheap, and I never noticed any bad health effects.
The new hotness from Molicel, the P45B, has arrived for testing
I’ve been asked about this cell a LOT lately and they’re finally here. Thank you N-Power Energy (NPE) for sending me four pre-production samples! Here are the basic specs from Molicel for this incredible cell: https://www.molicel.com/inr21700-p45b/
Another X-deliveries rant
I ordered from Element Vape on November 22 and got a delivery estimate of 3 days. Sounds good right? (I'm located in Los Angeles)
I just received my Caliburn G2 and..
I absolutely love it! I'm coming from a Juul and this thing is a breath of fresh air, or in my case Taro Cheesecake vapor.
Salt nic is a black hole for me
I can’t make it work anymore. I realized I was hitting my vape way too often. So I made a plan to switch to juul so I can cut down and smoke only one pod, or about a pack of ciggs worth of nic a day. It just didn’t happen.
Nicotine salt potency
Hi, I have a rather simple question that I haven't been able to find an answer to. I vape 10mg nicotine salt, but was wondering if that 10mg means 10mg equivalent to freebase nicotine, or 10mg nicotine plus the acid it is salted with.
What is a select vape coil?
Select Vape presents the Tobeco Super Tank Replacement Coils by (Tobeco). These coils are compatible with the Tobeco Super Tank Mini Sub-Ohm Tank. Each coil is constructed with stainless steel construction and equipped with superior kanthal heating wire. These coils can be installed into the tank via threaded coil connection.
What is the resistance of 0.2 ohm coils?
The 0.2ohm Mesh coils provide an atomizer resistance of 0.2ohm with a recommended range of 40-100W.
How many watts does a 5 ohm coil have?
unregulated a .5 ohm coil hits at 35 watts. So 30 watts it will be slightly under powered but "probably" still a pretty good vape. Equivalent to a partially discharged battery on a mech... Just because people on youtube are hitting it at 45 watts doesn't mean I have to. Kinda cool that it can do that but I doubt that is where I would live on a device like that.
Do all me tanks melt?
all me tanks are surgical Stainless Steel, haven't built hot enough to melt one yet. haven't cracked or broken one either. And never melted an insulator on a Russian/Kayfun, but have vaped the Russian at like 70 watts But then, must say, have paid more than $50 for most me tanks. lmao. Did melt the insulators on the Aqua though, but hey, 0.20 build, accidently locked firing switch, went to the bathroom, came back to a fog filled London night, and one hot mod........these things happen.
Can I run sub ohm on a mod?
In my opinion I'd rather run sub-ohm on a mod with an RDA that doesn't use an enclosed tank. I will take the pain of having to drip just so I can see the condition of my coils.
Is the Sigelei 100W a good mod?
Go ahead and get the Sigelei 100W. It's a really great mod, you will not be disappointed. As far as the Atlantis goes, do you want to rebuild? If so, I'd get something else like a Kayfun/Orchid or an RDA like the Tugboat or the TOBH. If you don't want to rebuild, the Atlantis is probably a really good choice. I'm thrilled that people who don't want to or can't rebuild for whatever reason (s) can get an RBA/RDA level vape right out of a box!
What is coil in vape?
The coil is a component inside the atomizer. But as we know, the world of vape lingo is vast and when you say coils, we know what you mean. If your vape mod is the body, atomizer heads are the heart, a fundamental part of your vaping experience.
What are atomizer coils made of?
Most atomizer coils are made from Nichrome or Kanthal. But there are different wire types that some vapers use. Nickel, Titanium and Stainless Steel are also available, but less popular. These tend to be used for temperature control vaping and aren’t suited to all e-cigs. But that is for another time.
What does it mean when a vape exhales?
This does mean that they will use much more e-liquid and their battery will drain quicker.
How does an atomizer head work?
An atomizer head converts energy from the e-cig battery and heats the coil inside, this then vaporises e-liquid that is soaked into the wicking material, which is then inhaled by you.
What is the resistance of an atomizer?
Well atomizer heads have an electrical resistance value measured in ohms (Ω). Depending on the amount of electrical resistance will depend on what ‘ohm’ your atomizer head is. Atomizer heads generally fall into two categories. High and low resistance.
What is the outer casing of an atomizer?
It is the outer casing which attaches directly to the base of the tank and provides electrical contact to the coil.
Do vapers use e-liquid?
Some vapers prefer an atomizer head that lasts a long time, doesn’t use much e-liquid through the day and they don’t look for larger clouds of vapour. Other vapers are satisfied exhaling large clouds of vapour and are happy topping up with juice more frequently. The best thing to do is experiment.