Lightning Vapes Nichrome 80 Resistance wire is perfect for rebuilding your atomizer, and especially good for sub ohm coil builds. It has a lower resistance per length compared to kanthal, which means that it will heat up noticeably faster and is a preferred alternative to kanthal for many cloud chasers for this reason. Nichrome Series 80 Wire
Full Answer
Can You vape on nichrome coils?
Again, take note that if you have (or suspect you may have) a nickel allergy, then you should not vape on nichrome coils, and maybe you should also avoid stainless steel. Kanthal has been the choice of most vapers for a longer time, due to its ease of use and higher resistance.
What is the best wire for vaping?
Kanthal has been the choice of most vapers for a longer time, due to its ease of use and higher resistance. Mouth to lung vapers appreciate their higher builds, and a 26-28 gauge Kanthal wire is always dependable—and hard to swap for anything else.
What is nichrome wire made of?
Nichrome wire is an alloy composed of nickel and chromium, and may also contain other metals such as iron. Fun fact: nichrome has been used in dental work, such as fillings.
Can You vape with NiFe or tungsten?
Wires like NiFe or Tungsten can be used for vaping purposes, but you’ll be hard-pressed to source them, and they don’t actually offer advantages over the wires that are being presented here. There are some basic characteristics that apply to all wire, regardless of the composition of it.
Is Nichrome wire safe to vape?
NiChrome is a good vape wire, but there are a few caveats to using it. Since it's an alloy of nickel and chromium, it has a really fast ramp-up time – it can heat up really fast, which means that complex coil builds can really benefit from it.
What wire is best for vape coils?
Stainless steel wire comes in a variety of grades but SS316L is medical and food grade and thus the most popular type used for vaping. Stainless steel wire heats up faster than kanthal or nichrome and that makes it the go-to wire for vapers seeking a quick and hard draw.
What is the safest coil for vaping?
in stainless steel. Chromium (Cr) undergoes passivation by oxygen present in the air. During this process a very thin layer of chromium(III) oxide is formed. It is widely known that chromium(III) compounds are recognised as safe.
Is Ni80 safe to vape?
I would say the taste is exactly the same, unless for some reason you can detect a state from certain types of metal. I can't notice any difference. And as far as I know ni80 is safe to use.
How do you vape Nichrome wire?
Nichrome has a lower melting temperature than Kanthal, so you need to be careful when dry burning your coils—they will burn open if you aren't careful. Start low and pulse the coils. Don't rush into it and hit them with max wattage while dry.
What is the difference between nichrome and Kanthal wire?
Nichrome (specifically Nichrome 80) is made from nickel and chromium blends. Kanthal is an iron-chromium-aluminum (FeCrAl) alloy. The important difference to note here is that the Nichrome wire contains no Iron. Some people say they can taste a difference.
How do you clean a nichrome coil?
Add hydrochloric acid to a small metal bowl. Hold the wire between the sides of the metal tongs, so that when you dip the wire, it does not drip any acid onto your skin. Dip the wire down into the acid and hold for three seconds. Remove the wire from the acid.
Are ceramic coils Safe 2021?
However, subsequent testing of ceramic coils found no evidence of particulates from ceramic coils being a problem. In the end, the studies are inconclusive, but the worst-case scenario is that long-term vaping with ceramic coils may be dangerous to one's health.
Are titanium coils safe?
A question vapers frequently ask is 'how long do titanium coils last? '. Although they are more expensive – titanium lasts a lot longer than any other metal, meaning you won't need to replace them anywhere near as often. These coils are also one of the safest options and not affected by rust or corrosion.
Is ni80 nickel?
NIC80 wire is a resistance heating wire comprised of 80% Nickel and 20% Chromium. NIC80 wire is commonly used as a resistor at elevated temperatures.
What is ni90 wire?
Nichrome 90 is an alloy consisting of 90% Nickel, and 10% Chromium. It is ideally suited as a resistance wire heating alloy, with lower resistance than that of Nichrome 80 due to it's slightly higher nickel content.
Which is better kanthal or stainless steel?
Compared to kanthal, stainless steel has a slightly lower resistance and a slightly faster ramp-up time for a given wire gauge. Unlike some of the other non-kanthal coil materials, people generally find that stainless steel doesn't introduce any off flavors that require getting used to.
What are the things to look for when choosing a vape wire?
There are three things way pay attention to when choosing a vape wire – flavor, vapor production, and ramp-up time (how fast the wire heats up). Knowing the properties of each of these wires will give you an opportunity to find one that matches your particular vape style more easily.
What metal is used to make vape wires?
Those materials are: Kanthal (FeCrAl) NiChrome (Ni80) Nickel (Ni200) Stainless Steel (SS) Titanium (Ti) Each of these materials is specific, and vaping with it will produce different results.
What is TCR in vaping?
TCR is a complex calculation that tells the device how to regulate things to keep the resistance of the vape wire steady and even throughout your vape session. The mod delivers short, intermittent pulses of current, making sure that the temperature never exceeds safety limits.
What are the two modes of vaping?
In essence, there are two different modes of vaping – the wattage mode and the temperature control mode. Not every wire can be used in both of these modes! If you try, and you don’t know what you’re doing, you’re risking a battery mishap or, worse yet, poisoning yourself. So, tread carefully!
Why does a 20 gauge wire heat up so slowly?
That’s because the resistance of the wire goes down, meaning that it takes more time to heat up. 20 or 22 gauge (thicker) wires will heat up slowly, but same is true for coils that are made from thinner wires but have multiple strands (exotic coil builds such as the Alien or Clapton).
What is SS wire?
Stainless steel wire is available in a lot of grades (316, 316L, 410, 413, just to name a few) and most of these grades are suitable for use when building vape wires. However, because there are so many options, there’s often confusion as to how good SS really is – that’s because some talk it up, while others hate it with a vengeance. Of course, these people are usually talking about totally different SS wire grades.
What is the TCR of a nickel wire?
Vapers familiar with temperature control mods will remember that nickel was, in fact, the first wire used for it. Its TCR is a nice, round number (0.006) , which means that it’s easy for devices to calculate how much power needs to be applied to it and when to cut it to maintain a safe temperature. With that said, you need to know that nickel should only ever be used with TC. It has a propensity to overheat when used in wattage, which means that it can catch on fire and melt, leaching harmful substances into your vapor.
What is the best wire for vaping?
Stainless Steel Wire. The only vape wire that can pull double duty (work in both wattage and TC modes) is the stainless steel wire. It’s perfect for vapers that haven’t made up their mind between TC and wattage mode or fail to check the modes they’re firing in regularly.
What is NiChrome wire?
Another fan-favorite for wattage vaping, NiChrome, is an alloy composed of nickel and chromium. If you’re looking for fast ramp-up time, this is the wire you should look into. Other than that, it behaves similar to Kanthal wire – it’s easy to work with (slightly less spring than Kanthal wire) and holds shape well.
What are the different types of vape wires?
Types of Vape Wires. Shutterstock / Hurricanehank. There are five different types of vape wires generally used: Kanthal Wire (FeCrAl) NiChrome. Stainless Steel. Nickel. Titanium. As you can tell, only one vape wire is versatile enough to be used in both vaping modes, and that’s Stainless Steel.
What gauge is used for vaping?
When talking about vape wire size, vapers are referring to gauge, the actual wire diameter. The most popular gauges that vapers use are 32, 30, 28, 26, 24, and 22 – a majority of vape coils, even the most eccentric ones and used in the best vapes, can be built with these. The important thing to remember here is that the bigger ...
What is the ultimate guide to vape coils?
The Ultimate Guide to Vape Wires and Vape Coils. You won’t be tapping in the dark like so many other beginner builders, and your first coil will be right as rain and ready to fire. At one point or another, a serious vaper will try a hand at building their coils – out of economic reasons, engineering prowess, or just pure fun.
What are the two modes of vaping?
You know by now that there are two different modes of vaping – the wattage mode and the temperature control mode . Of course, it would be great if we could just use any old vape wire type for both of these modes.
What is SS wire?
Stainless steel wire comes in various grades (410, 413, 316, 316L, 430, 304, and so on), which adds to the confusion a bit and makes it seem as if various vapers are either singing praises or talking down the same type of wire. Some grades of SS wire contain almost no nickel (SS is an alloy composed of various parts of chromium, nickel, ...
AzPlumber Vaping Master Verified Member ECF Veteran
Your question does not have a simple answer. Max. wattage will depend on several factors, wire gauge, air flow and efficiency of the wick.
Nikea Tiber Super Member ECF Veteran
The difference between nichrome and kanthal is that for the same gauge, nichrome (also known as ni80) has a much lower resistance per mm of wire. Because of this, between builds of equal size, a nichrome build will have lower resistance.
93gc40 Vaping Master ECF Veteran
You can add watts till it's too hot to vape. There is no max SAFE wattage. There is a point I guess were the heat generated would cause the wire to fail. But then it just breaks and stops working.
What is nichrome vaping?
Nichrome is a blend of nickel and chromium. The ratios of the two metals can vary; the most common nichrome alloy for vaping is Ni80, which consists of 80-percent nickel and 20-percent chromium.
Why is temperature control important in vaping?
The main purpose of temperature control vaping is that it helps you avoid dry hits. Well, you can also do that yourself by vaping at a reasonable wattage and remembering to refill your tank. In that sense, temperature control vaping is an interesting gimmick, but it’s completely unnecessary for most people.
What material is used for RDA coils?
Nichrome is a common material for pre-wrapped RDA coils, but you won’t see it often in the world of sub-ohm tanks. When you’re shopping for sub-ohm tank coils, kanthal and stainless steel are the materials you’re most likely to see. Compared to kanthal, stainless steel has a slightly lower resistance and a slightly faster ramp-up time ...
Can you use nickel coils in wattage mode?
Nickel and titanium coils are intended for temperature control vaping only and should not be used in wattage mode. Even if the resistance of a nickel or titanium coil is within your mod’s supported range, wattage-based vaping is intended only for a coil that remains relatively stable in resistance during use.
Can you use stainless steel coils on a vape tank?
The last thing to consider before you buy a vape tank using stainless-steel coils is that stainless steel does contain a small amount of nickel. If you are allergic to nickel, you’ll probably want to avoid stainless steel and stick with kanthal coils.
Is stainless steel a Kanthal coil?
Compared to kanthal, stainless steel has a slightly lower resistance and a slightly faster ramp-up time for a given wire gauge. Unlike some of the other non-kanthal coil materials, people generally find that stainless steel doesn’t introduce any off flavors that require getting used to.
Can you dry burn a nichrome coil?
The other factor that you should be aware of when using nichrome is that you can’t dry burn a nichrome coil as aggressively as you can a kanthal coil. If you heat a nichrome coil until it glows bright red, the metal may break.
