A lot of vapers like a 50/50 ratio, but I think the ultimate mixture is around 15-20% VG and 80-85% PG. It’s nice to have a small amount of VG in the mix to help thicken the e-liquid and to create a thick and satisfying cloud of vapor. But if you add to much it will take away from the flavor definition and throat hit.
Is 50/50 a good ratio for a vape?
Yep, That’s a good ratio. Having just gotten into vaping what little I have used there is also the type of vaporizer used that makes a difference. Bottom coil can use closer to 50 -50 mix but older ce4 needs a thinner blend with more PG.
What is the normal nicotine content of a vape?
Low vapor production 1 Regular nicotine: 12-24 mg/mL 2 Nicotine salts: 30-60 mg/mL More ...
Can you mix vape juice?
Vapers commonly ask, “Can you mix vape juice?” Well, the answer is a resounding, “Yes! Of course, you can!” Mixing it up a bit is a great way to introduce new flavors and experiences to your palate.
What percentage of vapable concentrates should I use?
Vapable – 15%. Most of our own brand concentrates work great at around the 15% mark. There are some we feel work better a bit stronger – such as Pear Drops (20-25%). Others we feel need less – like the Spearmint (5-10%).
Is 5% a lot vape?
5% Nicotine May Be A Lot But Many Vapers Still Use It Given that it's a very high concentration to be vaping, the only ones that should even consider it are heavy smokers that are trying to switch to vaping and feel as if they need a high strength e-liquid to successfully switch. Otherwise, 5% is probably too much.
Is 20mg the same as 2% vape?
A 20mg e-liquid is the same as 2%
Is 3% nicotine a lot in vape?
0-3% - 0-30mg of nicotine per milliliter. The most common amount in commercial vape juice and the most flavors. 3-5% - 30-50mg of nicotine per milliliter. A higher amount (3-5mg per mL), best for regular to heavy smokers trying to cut down on their current intake levels.
What percent of vape juice should be flavor?
10%-15%If you are using E-Flavors, you probably want to keep the total volume of all the flavors you are using at 10%-15% of the total volume of e-Liquid. Maybe slightly more or less depending on which flavors you are using.
What is 3% nicotine in mg?
3mg nicotine - This is the lowest level nicotine you can get in a liquid (unless you mix it yourself with some 0mg to dilute it). It's often the ideal final step for people quitting smoking, who have reduced their intake to almost nothing.
What is 2% nicotine in mg?
20mgE-liquid strength ranges from zero nicotine, up to 20mg/ml, or 2%. This means there are 20 milligrams of nicotine present in each millilitre of e-liquid.
Is 30% nicotine a lot?
30mg is still enough to satisfy most vapers, including those who have recently quit smoking. However, it is significantly lower than 50mg, so most vapers notice the difference. 30mg is just above half the amount of 50mg, so bear this in mind.
Is 10mg NIC salt strong?
What strength nic salt is best? Nic salts are most commonly sold in two strengths. 10mg, which is best suited to light smokers that smoke less than 20 cigarettes a day and 20mg, which is best suited to heavy smokers that smoke 20 or more cigarettes a day.
What vape strength should I get?
6mg/ml or 0.6% (Low) - suitable if you are smoking 5 to 10 a day. 12mg/ml or 1.2% (Medium) - suitable if you are smoking 10 to 15 a day. 18mg/ml or 1.8% (High) - suitable if you are smoking 15 to 20 a day. 20mg/ml or 2.0% (Very high) - suitable if you are smoking more than 20 a day.
How much nicotine do I mix in e-juice?
In order to top up your doubler (15mls in a 30ml bottle), you will need to add 15mls of 6mg/ml flavourless nicotine eliquid. The final bottle will contain 30ml of 3mg/ml flavoured eliquid. So there we have it, your basic guide to adding nicotine to your e'liquids. Hopefully you've found this useful.
How do you mix VG and PG nicotine?
When you get your package, use the pipettes to drip about 10-20 drops of flavoring in one of your empty bottles. Fill your bottle up to the middle with PG and the rest with VG. Shake and set aside for a few hours to let the bubbles settle. Try your vape juice, and adjust to taste.
How do you dilute vape juice?
E-juice dilution can be accomplished in two ways based on the VG/PG ratio:With higher VG e-juices, adding a drop or two of distilled water is the way to go, because high VG e-liquid is rather thick due to the viscosity of vegetable glycerin. ... With high PG vape juices, you can just add a drop or two of VG.
How much capella concentrate should I mix?
Capella – 15%. We recommend mixing test batches of Capella concentrates at around 15% for a medium strength flavour. However, you may find yourself mixing some at 20% or even 25% if you prefer fuller flavoured liquids.
What percentage of concentrates are good?
Most of our own brand concentrates work great at around the 15% mark. There are some we feel work better a bit stronger – such as Pear Drops (20-25%). Others we feel need less – like the Spearmint (5-10%). While you get used to the flavours, we’d suggest starting with initial mixes at 15% and then adjusting to your personal taste.
How much flavor West is recommended?
Flavor West recommend 15-20% across their entire range. This is pretty accurate, so we’d suggest mixing test batches at the 15% mark and taking it from there.
How to tell if a flavour is strong?
Use your sense of smell. Generally, if a flavour smells very strong it will need a low percentage in the mix – and vice versa.
Is VG good for PG?
If you are making a higher VG liquid, bear in mind that VG isn’t as good at carrying flavour as PG so flavours can seem ‘muted’. For this reason you may need more flavour in a high VG mix.
Can you mix your own E liquid?
There will always be a lot of trial and error in mixing your own e liquid. You will make a lot of bad mixes along the way. But it is worth all the pain for when you find those amazing combinations that are vaping heaven!
Can you mix Capella flavours?
It is certainly not always true, but often most flavours from a manufacturer will need mixing at similar strengths. So, for example, if you liked one Capella flavour at 10% (which is fairly low), it would probably be a good idea to mix test batches of other Capella flavours at around 10%.
What is the percentage of nicotine in e-liquid?
This means that if you have some e-liquid containing 1.2% nicotine, any amount you measure out will be 1.2% nicotine and 98.8% PG, VG and flavorings. Technically, this measurement is called “nicotine by volume,” in the same way the percentages on a bottle of liquor are “alcohol by volume” or ABV for short.
How much nicotine is in e-liquid?
E-liquids come in strengths that start at zero nicotine and go up to over 50 mg/mL. You may have also seen nicotine strengths expressed as percentages instead of concentrations. All this can be confusing at first, but it doesn’t have to be! This guide will help steer you in the right direction when choosing nicotine strength, and show you how to navigate the market.
What is the nicotine strength of Juul?
The popularity of nic salts e-liquid is the reason you see nicotine strengths jumping from 3 mg or 6 mg to 25 mg or even 60 mg in online shops these days.
How much nicotine is in 6 mg/ml of e-juice?
For 6 mg/mL e-juice, this means every milliliter contains 6 milligrams of nicotine. If you need to work out the total amount of nicotine in a bottle or in a tank, just multiply the strength in mg/mL by the number of milliliters of it you have.
What factors to consider when picking nicotine strength?
If you’re a new vaper, there are two major factors to consider when picking nicotine strength: your smoking habits, and the type of device you are planning on using. To help you navigate the market, we have categorized our suggestions by vapor output, as this is the factor that ultimately dictates the amount of nicotine consumed per puff.
What is Vaping360?
The Vaping360 team is a diverse group of experienced vaping contributors. We strive to bring you the finest content on all things vaping. Don’t forget to follow us on Facebook and Instagram for more!
How to convert percentages to mg/ml?
The conversion couldn’t be any simpler. To convert back from percentages to mg/mL, just multiply it by 10. That’s all there is to it!
How many ml bottles are in a mixing kit?
The kit contains everything you need to start mixing your own liquid from measuring syringes, 10 x empty 30ml and 10ml bottles to store your liquid in, and, of course, all the ingredients you need. Click here to view the DIY Mixing Kit.
How to get the best flavour out of a bottle of juice?
Steeping is a personal choice, most of our fruit flavours are good to go straight away, but oxidising the liquid over a few days will help improve the flavour. To get the best flavour out of the liquid, shake the bottle, then crack open the seal, squeeze a bit of fresh air in to oxidise the juice, then replace the cap & give it a good shake, or leave in a safe place (i.e. a dark cool cupboard) with the lid off for a few days.
Can you add diluents to VG ratio?
Here, you can input your desired overall VG and PG ratio. We advise not to add extra diluents, however if you need to our calculator allows you to do so.
Does nicotine have a VG?
Nicotine also has its own VG and PG ratio, just input the ratio in this section as displayed on the nicotine bottle/label (select “Custom” and change accordingly).
What is the best VG/PG ratio for vaping?
Ideal VG/PG ratios in this range include 80/20 and 70/30.
What is DL vape?
DL is an innovation in vaping that took place over the past 4 years where vapor is inhaled directly from the vape mod into the user’s lungs. This delivers a powerful burst of flavor, nicotine, and big clouds. Many say this innovation makes vaping a more pleasurable way to consume nicotine as opposed to cigarettes because the sensation of flavor is so strong.
What is MTL in vaping?
MTL describes a method of vaping where the vaper first inhales a cloud of vapor into his mouth, and then inhales again to bring the vapor into his lungs. This method simulates the way most people inhale cigarettes, colloquially known as “shotgunning”.
What is the best carrier for vaping?
Propylene glycol is a favored carrier for suspending natural and artificial flavors in vape juice due to it’s low viscosity, ready availability, and of course, that on it’s own, it’s relatively tasteless. You can expect that for all intents and purposes, every e-juice on the market includes PG because very few flavorings are available in other carriers.
Why does my vape scratch my throat?
So if you are wondering why your vape is scratching your throat as if a wild cat is on the loose, then may be it is time you understood the what makes up 95% of your e juice – PG and VG.
What is VG/PG ratio?
The VG/PG ratio is exactly what it’s name suggests – the balance between VG and PG content in e liquid. Vapers have unlimited choice in which ratio to choose and it can be daunting for new comers to make an informed decision for his or her vaping needs.
What is the advantage of PG in vaping?
Another great advantage of PG is it’s relatively low viscosity. This means that the liquid more readily flows – think about the difference between pouring a glass of milk and a hefty dose of maple syrup. If you are the type of vaper/smoker who likes to drag for a good few seconds, exhale, and go for it again, then you need an e-liquid that quickly absorbs in the cotton wick to avoid a complete burnout hit to the throat. If you burn off the liquid quicker than it can replenish from the tank, then you will experience what is known as pure trauma in the realm of vaping – a dry hit.
What is the best base for e-liquid?
Another recommendation is to try to stick to the same bases when mixing. All e-liquids use vegetable glycerin or propylene glycol at their base. Maintaining the correct ratio of PG and VG will contribute to a successful mix. Higher amounts of PG will thin the liquid, give your vape more of a throat hit, and produce less vapor. More VG, on the other hand, will provide you with a thicker liquid, be smoother on the throat, and create more of a cloud.
Why do you mix nicotine?
Mixing it up a bit is a great way to introduce new flavors and experiences to your palate. With thousands of flavors out there, you’ll find an almost infinite number of combinations with which to experiment. Another advantage of mixing is being able to create your preferred nicotine level when it’s not in stock. Say, for example, that the store has only 0mg or 6mg nicotine, and your preferred strength is 3mg. You can mix them to get the right combo for your liking.
What are some good flavors to go with bourbon?
Fruity Flavors. Fruity flavors can be sweet or tart and balance well with the smoother flavors, including vanilla, rum, or bourbon. Typical fruit-vaping flavors are apples, berries, lemons, limes, strawberries, and watermelon. Apple pairs well with cinnamon, ginger, or caramel. Blueberry tends to be quite sweet and benefits from ...
Does PG or VG make a cloud?
Higher amounts of PG will thin the liquid, give your vape more of a throat hit, and produce less vapor. More VG, on the other hand, will provide you with a thicker liquid, be smoother on the throat, and create more of a cloud.
Is stock mix more expensive than home mix?
Stock mixes can be more expensive than home-mixed combinations.
Can you mix flavors in vape?
Keep in mind that mixing tasty vape flavors will be similar to mixing good food flavors. After all, it’s the same tastebuds doing the same job. With so many combinations to choose from, it’s a good idea to start with what you know and focus on flavors that you think you might enjoy.
What is the best VG to PG ratio for vaping?
A lot of vapers like a 50/50 ratio, but I think the ultimate mixture is around 15-20% VG and 80-85% PG. It’s nice to have a small amount of VG in the mix to help thicken the e-liquid and to create a thick and satisfying cloud of vapor. But if you add to much it will take away from the flavor definition and throat hit.
What is VG in e-liquid?
Probably all the vapors know that e-liquid is made up of two main ingredients propylene glycol (PG) and vegetable glycerin (VG). The ratio of PG/VG depends on who makes the e-liquid, in some cases you can even pick your e-liquid PG/VG ratio.
Why is diethylene glycol in e-liquid blown out of proportion?
Basically the whole “diethylene glycol in e-liquid” story was blown out of proportion due to the fact that PG (propylene glycol) is sometimes used in the making of anti-freeze. Hungry reporters were looking for a story, and I suspect big tobacco helped spread this misleading information. People started to associate propylene glycol (PG) with diethylene glycoil causing people to start requesting e-liquid without PG. I believe this is a big reason why we use VG in our e-liquid today.
Is Virgin Vapor 100% VG?
True 100% VG e-liquid is very hard to come by since most flavoring used in making e-liquid come with a PG base. Virgin Vapor does offer 100% VG e-liquid, there flavoring comes in a base of organic ethyl alcohol. I personally don’t like a lot of VG in my e-liquid. I prefer an e-liquid that has defined flavor and a good throat hit over a somewhat thicker cloud of vapor. Anything over 50% VG and 50% PG is too much VG for me.
Does thicker liquid affect wicking?
Yes, thicker liquid can affect the flow/wicking of e-liquid. That’s another reason I prefer the 80pg/20vg mix.
Does e-liquid have PG?
Currently almost all e-liquid comes with both PG and VG. If you make your own e-liquid or if you order e-liquid from a company that lets you select your own PG/VG ratio, it’s important to understand how each ingredient will affect your vape.
Is diethylene glycol in e-liquid?
At the end of 2009 the FDA released a statement claiming that they had found diethylene glycol in electronic cigarette e-liquid. Diethylene glycol is a harmful ingredient used in the making of anti-freeze.
What is the nicotine content of vape e-liquid?
If you are vaping and have some e-liquid containing 1.2% nicotine, any amount you measure out will be 1.2% nicotine and 98.8% PG, VG, and flavorings.
How much nicotine is in a bottle?
Now that we have the two volumes, nicotine (0.079mL) and the volume of the full e-liquid bottle (10mL), we can calculate the percentage of nicotine in the bottle (0.079/10) x 100, which is 0.79%, which is a very accurate small number, so a manufacturer will round up to 0.8% listed as the nicotine content in the bottle.
How many mg of nicotine is in a milliliter?
Nicotine has a density of 1.01 grams per cubic centimeter, which means that 1,010 mg of pure nicotine takes up one milliliter. We can use this to convert mg of nicotine to mL of nicotine. Let’s say we have a 10ml bottle of e-liquid, and we need to find nicotine level in mg.
How to convert nicotine strength to percentage?
Converting from a nicotine strength in mg/mL to a percentage is easy. Just divide the amount of nicotine in mg/mL by 10. To convert back from the percentage to mg/mL, just multiply it by 10.
What is throat hit in e-cigarettes?
Nicotine has a lot to do with how an e-cigarette performs. This is commonly referred to as the “throat hit.” When moving up or down the nicotine level scale, try only one level up or down compared to the nicotine strength you are currently on due to the throat hit.
What percentage of alcohol is in a beer?
If a bottle of beer is sold as 4 percent ABV, this means 4 percent of the entire bottle’s content is alcohol, then each sip you take will contain 4 percent alcohol.
Is nicotine percentage confusing?
Nicotine percentages can be confusing to a new vaper, in this article we help make sense of it all.
What is 80% VG/20% PG?
80% VG/20% PG: (80/20) There’s very little throat hit but lots of thick vapor with this ratio; the sweetness of the VG really starts to affect the flavor at this level. This is also where the high VG content can really start to wreak havoc with gunk on the coils and wicks.
What do vapers focus on?
Beginning vapers are likely to focus primarily on two things: their hardware and the flavors and nicotine levels of their e-liquids. After they gain some experience with vaporizers, their attention usually turns to the effects of variable voltage and wattage, and they may move on to mods.
What is the difference between VG and PG?
There’s one other important difference between the two. Since PG is thinner, it’s absorbed quickly by the wicks and less likely to gum up the coils on atomizers. The more viscous VG can quickly build up on coils, wicks and other components so more frequent cleaning is required; and VG-based liquid won’t work well at all with some older clearomizers with small coils. Many vapers prefer to use VG liquid with rebuildable atomizers for that reason. On the other hand, sub-ohm tanks are built to withstand higher voltages and can easily handle VG-based juice. Why Mix PG and VG? Initially, many large e-juice manufacturers created their products with PG bases, and some offered VG e-liquids as an option for those allergic to propylene glycol. However, they quickly discovered that creating a base by mixing PG and VG allowed them to combine the best elements of each substance, to provide a range of choice for vapers looking for different characteristics in their e-juice. If you mix your own e-liquid, of course, you have the ultimate control. You will likely discover that certain PG/VG ratios work best with your vaporizer and that different ratios are preferable for different families of flavors; you’ll also find that high-VG juice mixed with several flavors can take longer to steep, and that most high nicotine concentrates and “interesting” flavors aren’t available in a VG suspension. The best approach when trying different PG/VG ratios is to start with either 70/30 or 50/50 as a baseline, and then go from there. Common PG/VG Ratios and Their Uses Still not quite sure which PG/VG ratio might suit you best? Let’s take a more detailed look at the possibilities:
What is 100% PG?
100% PG (Max PG): Once quite common but not as popular anymore, e-juice with a 100% propylene glycol base has the strongest throat hit and best delivery of most flavors. However, the amount of vapor produced is noticeably less than with e-liquid that has a significant amount of vegetable glycerin. Other factors can play into your ultimate decision;
Is VG or PG better for vaping?
Other factors can play into your ultimate decision; for example, we’ve discussed the sweet VG flavor which can distort the taste of very delicate flavors. However, you may also find that the bite of a blend that’s heavy on PG works best to bring out the tartness of fruit flavors, while the thickness of VG can make creamy flavors feel like you’re inhaling a mouth full of delicious dessert. In any case, much of the fun of vaping is experimentation and discovery, and trying out different PG/VG ratios can be more enjoyable and less “nerdy” than messing around with voltage and resistance.
Is VG a good base for vaping?
However, the boring details about PG and VG aren’t necessary for most vapers to study. Both bases are considered safe and are widely used in a variety of consumable products. The one major “health” issue to consider is that a small number of people are allergic to propylene glycol, experiencing symptoms like hives, rashes or upset stomachs. PG can also cause throat irritation for some, for reasons which will become obvious in a moment. Switching to an eliquid with a VG base may be necessary for these vapers.
