Although we usually recommend 50% VG blends for coils between 1.0Ω or 1.8Ω, some of these juices work perfectly with some very sub-Ohm coils, it's just trial and error between different types of coils and different flavours. Ohms is a measure of electrical resistance, a vape coil that's 1.0Ω or less is sub-Ohm.
What is the best ohm coils for vaping?
Of course the vapor tends to get warmer and warmer as you go from 2.0 Ohms to 1.0 Ohms, however not as warm as with sub ohm coils. So, if you are a smoker trying to make the switch or a vaping beginner then a device with 1.5 – 1.8 Ohm coils would be advisable, however, in the end everything depends on personal preference.
What is the best vape juice for sub ohm vaping?
As a result, it is generally limited to the more hardcore enthusiasts. Many of whom are amazing artisans when it comes to coil building. Vape juice for sub ohm vaping must have at least 70% VG content. A 50/50 or PG e-liquid will not work for sub ohm vaping. VG juice is thicker and made for low resistance vape coils.
What is the best VG/PG ratio for vape juice?
Ideal VG/PG ratios in this range include 80/20 and 70/30. There’s a lot to learn when stepping into the world of vaping. However, a small bit of knowledge on the constituent chemicals in your vape juice can guide you to make informed purchase decisions on the best VG/PG ratio for your vape.
What is VG in vape oil?
Extracted from vegetable oil, VG is a completely safe for oral ingestion. The ingredient is what makes the vape cloud thick and sweet. That’s right – the rich and dense clouds we love are all thanks to VG.
What ohm is best for VG?
As a general rule, e-liquids that have more VG than PG are designed for e-cig mods that use atomizers with less than 1.0 ohms of resistance. This is otherwise known as sub ohm vaping.
What ohm is best for Ejuice?
The standard or regular level of ohm when it comes to vaping and your clearomizer is between 2.4 and 2.8. This is by far the most common ohm range chosen by those looking for replacement coils, with the most commonly chosen being 2.5. This standard level tends to offer the most consistent level for your vape.
What juice is best for 0.4 ohm coil?
Coils of 0.4 ohm and lower The amount of VG will usually need to be anything from 50% VG, and in some cases the user's preference is 100% VG. Remember, if you're not a sub ohm vaper, you may well be disappointed if you buy some of the more expensive thicker VG eliquids because they're designed for sub ohm coils.
What coils are best for high VG?
Aspire Coils.Geekvape Coils.Horizontech Coils.Innokin Coils.Smok Coils.Uwell Coils.Voopoo Coils.
What's the difference between 0.6 and 1.2 ohm coil?
The 0.6ohm coil is perfect for hybrid sub vaping that want more clouds and low nicotine dosage. The new 1.2ohm coil is for true mouth to lung vaping and perfect for high nicotine dosage without flavourloss.
What's the difference between 0.2 and 0.4 ohm coil?
The lower resistance 0.2 ohm coils allow higher wattage to be used. This said, in this case, the 0.4 ohm coils give much better flavour with the Cleito tank than the 0.2 ohm coils.
Is 0.6 or 0.4 coil better?
I found the 0.6-ohm best around 12 watts and the 0.4-ohm best around 25 watts. I used 70/30 3 mg juice in the 0.4-ohm coil and the flavor was good, but the nicotine was low for my tolerance as I'm used to vaping 3 mg at 100+ watts. But that's a personal thing, and the flavor was good for a 25-watt coil.
What juice is best for 0.6 ohm coil?
For 0.8/0.6Ω coils start with 60% VG or 70% VG and use that as a guide. For 0.5Ω coils start with 70% VG and use that as a guide. Just try a small amount until you know how your coil/device is performing with your particular juice flavour/blend.
What wattage should I vape at 0.4 ohm?
between 23-28 wattsThe 0.4ohm coil option performs at its best when used in higher wattage modes between 23-28 watts. The 1.2ohm coil option is best suited for use with either a classic or nicotine salt e-liquid, while the 0.4ohm coil performs best when vaped with a higher VG sub ohm e-juice.
What juice is best for 0.16 ohm coil?
You can still use many of the short fills used with the 0.16ohm coils above, but for conserving your coils the best juices are the lower VG e liquids. Vapour Days UK and the Cherub brands of e liquids come in 10ml bottles and offer a wide range of flavours and nicotine strengths to suit all vapers.
Does high VG juice burn coils?
If your juice doesn't soak into the wick as quickly, you're more likely to run into dry puffs and possibly burn your wicks. This means that juices with a high VG content (70 % or higher) can cause problems with wicking and may ruin your coils.
What wattage should I vape high VG?
When it comes to your VG/PG ratio, you'll want to ideally look at a 70:30 balance here. You could use a 50:50 juice but because you're likely vaping at a higher wattage (anything over 20 watts), using more PG will give a much harsher throat hit.
Angel Eyes Senior Member Verified Member ECF Veteran
need replacement coils, so which of those 4 coil resistances should I buy, and why?
Trayce Moved On ECF Veteran
Well I'm no electrical engineer but I vape 100% VG and it doesn't matter what the coil resistance is if you have a VV or VV/VW mod as you can adjust the power to find the sweet spot.
Angel Eyes Senior Member Verified Member ECF Veteran
well being an electrical engineer myself, I understand resistance, wattage, current and voltage - I just don't know which combination makes for the tastiest vapes, using 100% VG, and I don't have the time to do a lot of controlled experimentation.
Trayce Moved On ECF Veteran
As you know, juice has a sweet spot... turn down the power and you lose flavor and vapor, turn it up and you burn it. Right before it gets to the burny point, that's where you want to be. Point is, you can reach that sweet spot using any coil at all, of any resistance, from sub-ohm to 3.0 ohms and greater.
What is the best coil for vaping?
Coils of 1.5 ohm - 2.5 ohm (Ω) If you're just getting to grips with vaping, start with an 70% or 80% PG eliquid because this thinner liquid blend is ideal for these coils. It will allow for more discreet vaping as it produces less vapour, and it's usually the cheapest. You can also use thicker 50% PG eliquid which will give you more vapour, ...
How much VG should I use for juice?
The amount of VG will usually need to be anything from 50% VG, and in some cases the user's preference is 100% VG.
What is the difference between VG and VG?
Vegetable glycerine (VG) VG makes for a sweeter vape which creates more vapour and it has a thicker consistency. The advantage of using vegetable glycerine as the predominant base in e-liquid is because as it has a thicker composition it makes for a denser and more realistic-looking vapour.
What are the ingredients in e-liquid?
The most common base ingredients in e-liquid are propylene glycol (PG) and vegetable glycerine (VG). You will find that some e-cig manufacturers may use one or the other exclusively, while many manufacturers will use a combination of the two.
What happens when you put vegetable glycerine in an e-cigarette?
When vegetable glycerine comes in contact with the heating element in the e-cigarette it leaves behind a residue, which means more cleaning and shorter life of components such as the atomizer head or coil head. Please see the important notes further down the page because some people will not be able to tolerate VG.
Why is it important to use cotton coils?
When you're using cotton coils, it's very important to ensure the coil is thoroughly saturated in e-liquid to avoid dry hits (to avoid the cotton inside the coil getting burnt). The burning releases unhealthy chemicals, a bit like burnt toast, and although different chemicals are produced/released, neither are considered good and should be avoided.
Does VG vape have more flavor than PG?
eLiquid with a higher VG content tends to provide a smoother vape and diminished throat hit. VG doesn't carry the flavour quite as well as PG but but this can be countered by using more power to produce more vapour.
How much VG is in PG?
Although you will find e-liquids referred to as PG (as we do), it is most likely that they have a VG content too, anything from 15 - 50%, depending on the manufacturer and the particular flavour (each flavour is likely to have slightly different quantities).
Why use vegetable glycerine in vape?
The advantage of using vegetable glycerine as the predominant base in e-liquid is because as it has a thicker composition it makes for a denser and more realistic-looking vapour.
What are the ingredients in e-liquid?
The most common base ingredients in e-liquid are propylene glycol (PG) and vegetable glycerine (VG). You will find that some e-cig manufacturers may use one or the other exclusively, while many manufacturers will use a combination of the two.
Why is it important to use cotton coils?
When you're using cotton coils, it's very important to ensure the coil is thoroughly saturated in e-liquid to avoid dry hits (to avoid the cotton inside the coil getting burnt). The burning releases unhealthy chemicals, a bit like burnt toast, and although different chemicals are produced/released, neither are considered good and should be avoided.
Is propylene glycol a liquid?
Propylene glycol is a colourless, virtually odourless, clear viscous liquid with a faintly sweet taste. Propylene glycol comes in different grades of forms. In one form it's used in pharmaceuticals for example, and in another it has industrial uses in antifreeze and de-icer.
Does VG vape have more flavor than PG?
E-Liquid with a higher VG content tends to provide a smoother vape and diminished throat hit. VG doesn't carry the flavour quite as well as PG but but this can be countered by using more power to produce more vapour.
Is VG liquid better than PG?
VG tends to have a sweeter taste but generally delivers less of the 'throat-hit' than PG-based liquids. Users who like a thicker vapour may prefer VG-based liquids but ensure your kit is ok with VG, because tank-style kits with a coil head or atomizer head can to clog much faster on liquid with a high content of VG.
How does VG affect vaping?
How does VG/PG affect my vaping experience? With VG being responsible for a smooth throat hit and PG being responsible for flavour, that means your vaping experience is going to be affected depending on the ratio you use. Higher VG. With a high VG e-liquid, you can expect a thicker liquid, with a sweeter taste.
Why is VG a thick liquid?
VG is a thick liquid, so it will take much more power to “burn through” it. This gives coils a shortened life span. If a liquid is too thick, coils simply can’t work through it to vaporise, so they work harder to do so.
What is the best VG/PG ratio for nic salt?
Therefore, for Nic-Salts we recommend a more balanced VG/PG ratio like a 50VG/50PG or 60VG/40PG.
What does PG stand for in vaping?
What is PG? PG then in contrast, stands for Propylene Glycol which is just a food additive that is also added to many different cosmetic products. Similar to VG, PG is found in almost all e-liquids. In vaping, PG is used to replicate the ‘throat hit’ that you get when smoking cigarettes.
Is PG better for coils?
A high PG liquid will be better for coils, but it is likely that a liquid with a high PG ratio will hurt your throat. Some former smokers like this about PG, but it isn’t a comfortable feeling for most.
Is 50VG/50PG a good blend?
You might think, well surely a 50VG/50PG is the most sensible option then, best of both worlds right? Unfortunately that’s not how it works. A 50/50 is a great blend for e-liquids like nicotine salts, and beginners because it is a good starting point, but advanced vapers usually want more.
Is VG better than PG?
A high VG e-liquid will almost always reduce the lifespan of coils too, as there is a thicker liquid to vaporise. Higher PG. With a high PG e-liquid, you can expect a more intense and overall better flavour, but a much harsher throat hit. A high PG liquid will be better for coils, but it is likely that a liquid with a high PG ratio will hurt your ...
What is VG/PG ratio?
The VG/PG ratio is exactly what it’s name suggests – the balance between VG and PG content in e liquid. Vapers have unlimited choice in which ratio to choose and it can be daunting for new comers to make an informed decision for his or her vaping needs.
What is DL vape?
DL is an innovation in vaping that took place over the past 4 years where vapor is inhaled directly from the vape mod into the user’s lungs. This delivers a powerful burst of flavor, nicotine, and big clouds. Many say this innovation makes vaping a more pleasurable way to consume nicotine as opposed to cigarettes because the sensation of flavor is so strong.
What is MTL in vaping?
MTL describes a method of vaping where the vaper first inhales a cloud of vapor into his mouth, and then inhales again to bring the vapor into his lungs. This method simulates the way most people inhale cigarettes, colloquially known as “shotgunning”.
Is VG good for vaping?
This makes VG more suitable for beginners or people looking for a smooth vaping experience. If you cannot handle the scratchy throat hit of PG, then you should probably choose an e-liquid that has higher VG content for a smoother and sweeter experience.
Is glycerin good for vaping?
The organic gly cerin is a compound we consume in numerous food products and sweets on a daily basis. Extracted from vegetable oil, VG is a completely safe for oral ingestion. The ingredient is what makes the vape cloud thick and sweet. That’s right – the rich and dense clouds we love are all thanks to VG.
Can diabetics metabolize VG?
Diabetics could possibly experience problems with metabolizing VG. Moreover, for people who want a thick and rich cloud to experiment with vaping tricks, a higher VG content is recommended. If you are allergic to palm oil or coconut oil then VG could prove a problem, but this is relatively uncommon.
Is PG a solvent?
PG is generally safe to inhale, which is why it is one of several solvents used in asthma nebulizers. According to the FDA, long term use of propylene glycol, even in large amounts, is generally recognized as safe . It should be noted that this notion is made for consum ing PG orally.
What is sub ohm vaping?
The 'ohm' is a measurement of resistance, and sub-ohming refers to vaping using a device with a resistance level lower than 1.0 ohms, as suppose to 1.5 ohm to 2.8 ohms used in regular vapes. Naturally, this impacts the vape tank. Most vape tanks geared toward sub-ohm vaping will be capable of using coils with a resistance of lower than 1.0 ohm, and they typically have much larger juice channels. Larger juice channels means more juice on the wick, which can produce huge, dense clouds (one of the perks of sub-ohm vaping for those who like to cloud chase). These tanks typically demand more power and liquid consumption.
What is the resistance of a vape tank?
Naturally, this impacts the vape tank. Most vape tanks geared toward sub-ohm vaping will be capable of using coils with a resistance of lower than 1.0 ohm, and they typically have much larger juice channels.
What are the different types of vape tanks?
There are countless vape tanks available, but to make things easier for yourself you could easily break them down into two main types - MTL (mouth to lung) tanks and Sub-ohm tanks.
Can you use PG juice in a MTL tank?
Using a high PG (thicker) juice in an MTL tank is doable, but not recommended as it's far too easy to end up with dry hits and scorched cotton as the viscous liquid will have a hard time finding its way through your device. Sub-ohm tanks on the other hand are far better with thick, heavy liquids.
Do you want a low key vape?
Some vapers may want a low key vape, whereas other may want huge, dense clouds. Some might want a strong throat hit, others may want a more mellow and frequent experience - we're all different and finding that perfect balance while you're vaping feels great. One of the things that makes the experience unique is your choice of vape tank.
