what mode to run vape mod in for beginners

by Layne Abshire Published 2 years ago Updated 1 year ago

Full Answer

What are the best vape mods for a beginner?

The Best Vape Mods for a Beginner Eleaf iStick 30W Vape MOD: The iStick 30w is easily one of the most popular and successful box mods available for beginners today. With a durable form and simple design, the iStick 30W is a variable wattage/variable voltage vaporizer that has set the standard for smaller box mods.

What are vape mods and how do they work?

Most modern vape mods run on a vape chip and software, just like a smartphone. Vape mods also have a user interface, buttons, and a display. In fact, they’re probably closer to a mobile phone than a cigarette in this respect. Please though, DO NOT be put off by ALL the settings and bells and whistles inside your box mod.

How do I control the temperature on my vape mod?

Kanthal (Ka1) and Nichrome (Ni80) are hardly affected when heated, so this makes them useless for temperature control vaping. You have to go to Temp Control settings on the mod, and in there you will find the controls for setting your desired temperatures – usually in Celsius or Fahrenheit.

Are vape vapes safe for beginners?

Many vapes for beginners have been created with ease-of-use in mind. Equipped with multiple safety protections, most vaporizers have many fail-safes built in to help prevent common mistakes that happen while learning. Putting your health first shouldn't mean emptying your wallet either.

What mode should my vape be on?

The majority of factory-produced coils are made with kanthal wire, so this is why Power Mode tends to be used most often.

How do you use a vape mod for beginners?

All you need to do is hold the fire button down while you draw vapor from the mouth piece. E-liquid and oil vape tanks will put off vapor almost immediately, while it may take a dry herb or wax atomizer a few seconds to heat up and put off vapor.

What is a good wattage to vape at for beginners?

If you're just getting into vaping, starting with a low wattage, around 7 watts may be best.

What temp and wattage should I vape at?

Many people agree that 420 degrees Fahrenheit or 216 degrees Celsius is the sweet spot. You get as much flavor as possible without feeling the warmth of the vapor. If you want to add even more flavor, try a temperature between 425 and 450 degrees Fahrenheit or 218 and 232 degrees Celsius.

How do I adjust my vape settings?

1:503:08How to setup your Mod Kit? - YouTubeYouTubeStart of suggested clipEnd of suggested clipHowever if you're using a suburb device a coil of 1.0 ohm and under you need a thicker liquid weMoreHowever if you're using a suburb device a coil of 1.0 ohm and under you need a thicker liquid we recommend a 70 30 ratio as the device is more powerful if you use 50 50 liquid in a sub-ohm.

How do I start vaping?

With your first hit, don't try to inhale too much vapor. Just inhale enough to get a feel for the experience, and then progress to thicker clouds as you go. If your first hit is too harsh, consider switching to a different type of vape juice since some vape juice options are harsher than others.

What wattage gives the best flavor?

The sweet spot for getting a balance of vapour and flavour is around 0.3ohms. Depending on your coil choice you'll want to up the wattage from anywhere between 50 and 100 watts. Clapton and Alien coils usually take a bit more power to ramp up so you'll want to boost the wattage if you're using either of these options.

What does changing the airflow on a vape do?

With an increased airflow, you will experience less flavor, less of a harsh throat hit and more vapor (with a cooler and looser draw). With a decreased airflow, you will experience more flavor, more of a harsh throat hit, and less vapor (with a hotter and tighter draw).

What is mouth to lung vaping?

With mouth to lung (M2L or MTL) vaping, you inhale the vapour into your mouth first, collect it there, then breathe it fully into your lungs. Smokers will be particularly used to mouth to lung vaping, as it's a similar process to smoking cigarettes.

What is TC mode vape?

Temperature control (TC) in vape mods is a technological solution for dry and burnt hits. It also creates a consistent vape while taking longer drags because the temp stays the same—instead of getting hotter. The user chooses the temperature limit, typically from a range of 300°F to 600°F (100°C to 315°C).

Does higher wattage burn coils faster?

When you vape at a high wattage, the liquid absorbed by the coil's wick could be burning off faster than the wick material can absorb more ejuice.

Is vaping hotter than smoking?

Smoke vs vapor – Conclusions Smoke is hotter, more harmful, and hangs around for a lot longer than even the fattest sub-ohm clouds.

What is the atomizer part of a vape?

The atomiser portion of your device turns e-liquid into vapour and holds a reserve of e-liquid, ready to be vaped. The atomiser can be broken down into two key components: the tank/pod and the coil.

How does vaping work?

Vaping allows you to inhale nicotine by heating the e-liquid to produce vapor. This satisfies nicotine cravings, but also mimics the sensation of smoking, by providing a “throat hit” that many smokers have become accustomed to. Depending on your previous smoking habits, choosing the right nicotine strength in your e-liquid is essential to enjoy a satisfying vaping experience. What E-liquid to choose?

How much nicotine is in a MTL?

MTL vaping can use nicotine strengths anywhere from 3mg/ml to 50mg/ml (20mg/ml max in Europe). We recommend starting at 12mg/ml and adjusting as required.

What is an e-cigarette?

An e-cigarette is a device that heats e-liquid, turning it into vapour, which delivers nicotine and flavours. E-cigarettes were designed to help smokers transition from cigarettes. Millions of people around the world say that vaping has helped them transition from smoking.

What are the components of a vaping device?

Though vaping devices come in all shapes and sizes, they can typically be broken down into two key components: the battery and the atomiser. Let’s start by looking at the battery portion of a typical vaping device.

Which coil produces more vapour?

Restricted-Direct-Lung (RDL) coils produce more vapour than MTL coils and use less power and e-liquid than DTL. RDL coils are a good choice if you are looking for more vapour and flavour than MTL and less nicotine in each puff.

Do vapes mimic smoking?

Many vapes mimic the feeling of smoking a cigarette with tight airflow draw and vapour heat, optimized for higher nicotine e-liquids, which are generally advised for new vapers. The amount of power used in these vapes is usually lower, offering an experience similar to smoking.

What tank is best for vaping?

This question depends on whether you want more clouds or more flavor when you vape. Sub-ohm tanks are the right choice if clouds are your priority.

How to get cloud flavor in box mod?

Don’t rush yourself when you try a box mod. Prime the coil, fill your tank with juice, and start at a lower wattage setting. Keep increasing the wattage until you get the exact flavor and cloud production you want.

What Is a Box Mod?

After pod vapes, box mods are the most popular choice for vape enthusiasts. These devices get their name from the box shape most of them have. These devices come in a huge range of builds, prices and styles. You can find one to match almost anyone’s needs and budget.

How Much Do Box Mods Typically Cost?

These devices range in price from $50 for a well-made, full-featured device to $250 for a high-end, sophisticated box mod.

What is the difference between mechanical and box mods?

Mechanical mods offer the most freedom, but they also lack many of the safety features that box mods have. Mechanical mods should only be used by experienced vapers who have a thorough understanding of wattage, ohms and electrical resistance.

How to get flavor out of e-juice?

Lower temperatures can help you get flavor out of your e-juice. Going too high may burn out your juice and your coils. Higher wattage will help you create more clouds when you vape, but you don’t have to go that high. Even the most advanced devices don’t need more than 80 watts to produce huge clouds and dense vapor.

What to worry about when using a sub ohm atomizer?

There are only two things you need to worry about when you use this device. The first is finding your wattage, and the second is deciding whether you’ll use a sub-ohm tank or an atomizer.

What does it mean to have a high demand for vapes?

There are devices available to suit any budget or style. The high demand for high-powered vapes means cutting edge technology at very reasonable prices. There are vape mods of every nearly every color and form to suit your personality.

How much battery does a Smok Stick V8 have?

The 24.5mm device houses a massive 3000mAh high-drain internal battery, rear-facing USB charging port, and passthrough capability your downtime is at a minimum with the Stick V8. A sleek and simple housing uses a single button design to keep the confusion down and the clouds up. The Smok Stick V8 can fire resistances down to .15ohm for maximum power and safety.

What is a Smok Stick Prince Kit?

The SMOK Stick Prince Kit is one of the newest devices to release from industry giant SMOK. A long-time pioneer of new vaping technology, Smok has for years been the vape of choice for many beginner vapers. Smok is known for their stylish simplicity; these devices are the product of nearly a decade of innovation and development.

What is DirectVapor?

It means DirectVapor has the widest selection of the best beginner vapes at affordable prices. You don't have to invest big right away, but instead can make sure you've found the right vaporizer or starter kit from the right manufacturer and avoid cheap vape mods.

How big is a Smok Fit?

Very similar in appearance to a USB memory stick in appearance, the Fit is incredibly discreet and very lightweight. Measuring in at just 18.4mm wide and 107.5mm tall this device can "Fit" nearly anywhere you need it to go. Don’t be fooled by the small size, however.

How many ohms does an iStick 30 have?

While the iStick 30 is capable of firing coils as low as .4 ohm, the device was designed to shine with higher resistance mouth-to-lung atomizers and tanks. Mouth-to-lung is a method of inhaling that is similar to the way many inhale a cigarette and is considered by many to be the preferred style of vaping for beginners.

Is vaping intimidating?

While vaping can certainly be intimidating, you'll quickly find an active community of like-minded strangers eager to help you learn the ropes. In keeping with that spirit of helping and giving back, we present you with this quick and simple guide to the best vapes for beginners.

What is “temperature control” vaping?

Why is my vape consistent?

Vape consistency: By having control over the temperature your coils can rise to, the vape will be consistent from puff to puff, and even within one puff. In regular wattage mode, the hits are more inconsistent because the heat of the coil changes based on the length of the hit.

What is the best wire for vaping?

TC vaping generally uses one of these four types of vape wires: 1 Stainless steel: this wire is very popular and readily available. It comes in various grades such as 304, 316, 316L, 317, and 430 but the most common is SS316L. SS can be used in wattage or temperature control mode. 2 Nickel 200: commonly known as ni200, it was the first temperature control coil but it’s less common now due to some vapers having sensitivities to nickel. 3 Titanium Grade 1: otherwise known as Ti. It works well in TC but the user has to make sure it does not get overheated. 4 Nickel ferrous: also known as NiFe, comes in various grades such as 48, 30, 52, 70 and can be used in either mode, but is not widely available.

How to install coils on a mod?

Install the coil as normal but take care to ensure it is screwed down tightly, as far as it can be. In the case of rebuildables, make sure the leads are trapped firmly. Then put the atomizer or tank on the mod, and again make sure that it’s tightened down as far as possible (but don’t go crazy with over-tightening). Check that the resistance is reading accurately and lock the resistance if applicable (typically by pressing the +/- buttons).

How to fix dryness in vape?

When vaping in TC, if you do notice any dryness when you’re low on juice, adjust the temperature down. If your mod has wattage control in TC, you can adjust that too. Higher is usually fine, but don’t go too low; as mentioned earlier, your mod should limit your wattage when the set temp is reached, but it won’t compensate when the wattage is set too low.

What type of wire do you use for vaping?

Next, you must vape with the right wire type. TC vaping generally uses one of these four types of vape wires: Stainless steel: this wire is very popular and readily available. It comes in various grades such as 304, 316, 316L, 317, and 430 but the most common is SS316L. SS can be used in wattage or temperature control mode.

How does TC vaping work?

For TC vaping, you’ll use wires that have a known resistance-increase as their temperature rises. The mod checks the resistance of the coil at room temperature, then it continues to monitor it as you vape. The resistance change is converted into a temperature increase and the mod adjusts its power to maintain the selected temperature. Think of it as a car traveling in cruise control. To maintain a speed, more power is needed to go up a hill than down a hill… but the speed would stay the same.

What About Temperature Control Vaping?

I don’t tend to mess around with Temperature Control vaping that much; I tend to prefer wattage mode – I just like things nice and simple.

What is the wattage of a box mod?

The wattage of a box mod, in layman’s terms, is essentially the amount of power you send from the mod’s battery to the atomizer (AKA your vape tank). Higher wattages equal more power, and this, in turn, creates a hotter, more intense hit. And more vapor. If you want those BIG clouds, you gotta run your vape mod at higher wattages.

What is Trailblazer vape juice?

But then I tried Trailblazer which is a tobacco flavored juice that combines butterscotch and peanut butter. It’s rich, sumptuous, and very much an all-day vape and personal favorite of mine. I highly recommend this juice.

What happens if you prime a tank and load it on a mod?

If you prime your coil and load the tank onto a mod and then crank it up to 200W, one thing will happen: you’ll burn the coil out instantly ( and likely cough your guts up).

Do box mods run batteries?

Box mods also run multiple 18650 cells too, which means battery life is MILES better than it is on pod mods like the JUUL or single-cell mech mods like VGOD Mech Pro.

Do box mods come with chipsets?

This is one area that is pretty simple. Modern box mods 99.9% of the time come with vaping chipsets (like the one you have inside your phone).

Can you set e juice to low?

You can set it wherever you like, for instance, if you’re vaping sweeter E Juice, you could set it nice and low, to really juice-out the flavors.

What are VV/VW Mods?

The best way to understand VV/VW mods is by first considering the alternative: “unregulated” mechanical mods. These devices don’t have any complicated circuitry or anything of the sort: they just use the voltage created by the battery, so 4.2 V on a full charge. As the charge runs down, the difference in potential between the two parts of the battery decreases and so the power the battery can supply decreases too. This is why mechanical mods work best on a full charge.

How does a VW mod work?

VV/VW mods improve things by giving you a consistent voltage when you vape, and more than that, they actually let you choose the voltage you want. This can be higher than the voltage you could get from the battery otherwise, so they allow high-power vaping without the need to reduce your resistance to very low levels. However, in practice most vapers use fairly low-resistance coils anyway, while still enjoying the benefits of being able to set the power to whichever level you like.

What Type of Atomizer Are You Using?

The biggest factor in determining the sort of setting you should use is your type of atomizer, both the design and the resistance of the coil you ’re using.

What E-Juice Are You Using?

The other big factor in determining the setting you should use is the juice you’re vaping. Although the specific mix of flavorings will impact where the “sweet spot” for the blend is, if you’re looking at getting good performance without dry hits, the PG/VG ratio of the juice is the most important thing to consider.

How much wattage should I use for vaping?

I’m not much of a high-power vaper, so between 30 and 40 W is usually more than enough for my tastes, but many vapers go a lot higher, and sub ohm tanks make this possible. Again, the flavor you’re getting from your juice is the best thing to use as a guide: every juice and atomizer combination has its own “sweet spot” wattage, where the flavor really starts to shine without tasting burnt or leading to dry hits. Finding this is a challenge, but if you experiment a little, you’ll find the right setting for your needs.

What are the benefits of VW mods?

The additional benefit of VV/VW mods in comparison to mechanical devices is that they come with in-built safety features. For example, if you put the battery in the wrong way round, they’ll refuse to fire, or if you’re trying to use a battery that’s drained, they’ll display a “low battery” message and refuse to work so you have to charge. They also have maximum current limits built in so you don’t try to push your battery too far. This type of feature means you can vape with a bit more peace of mind.

Can you read coil resistance?

Finally, there are also plenty of handy little extras manufacturers can build into these devices. Almost all can read the resistance of your coil and display your remaining battery level. Additionally, many modern devices offer temperature control, which stops the coil from going over a pre-specified temperature. This means that you can completely avoid “dry puffs,” which is where there isn’t enough e-juice in your wick and it gets “overcooked,” so to speak, and tastes really awful.