Best Vape Wires Reviewed: Keeping Flavor, Build and Clouds in Mind
| Product Name | Best For | Heating Ability |
| Pure Atomist 32g Kanthal A1 Wire | Good flavor | Average heat up |
| TEMCo 28g Kanthal A1 Wire | Good flavor | Average heat up |
| Master of Clouds 22g Kanthal A1 Wire | Good flavor | Average heat up |
| Master of Clouds 26g Stainless Steel Wir ... | Excellent flavor | Quick heat up |
What type of coil is best for flavor?
The best ones to go for flavour wise are clapton, titanium (if you prefer vaping with TC mode) or an Alien coil. The sweet spot for getting a balance of vapour and flavour is around 0.3ohms. Depending on your coil choice you'll want to up the wattage from anywhere between 50 and 100 watts.
What is the best gauge wire for vaping?
Kanthal has been the choice of most vapers for a longer time, due to its ease of use and higher resistance. Mouth to lung vapers appreciate their higher builds, and a 26-28 gauge Kanthal wire is always dependable—and hard to swap for anything else.
Is Tiger wire good for flavor?
The tiger coil is simply just a twisted coil containing a single round strand and a single flat ribbon strand. Twisting two differently shaped wires gives it more pockets and grooves than a standard twisted coil. This creates more heat and denser vapor, giving it an improvement in flavor over single-strand builds.
Which is better Kanthal or stainless steel?
Compared to kanthal, stainless steel has a slightly lower resistance and a slightly faster ramp-up time for a given wire gauge. Unlike some of the other non-kanthal coil materials, people generally find that stainless steel doesn't introduce any off flavors that require getting used to.
How do I choose a vape wire?
This is the diameter or “thickness” of the wire. Most commonly, you'll see 22, 24, 26, 28, 30, and 32 gauge wire used for vaping. As a rule of a thumb, the higher the value of the gauge, the thinner the wire is. As an example, a 28 gauge wire will be thinner than a 26 gauge wire, but thicker than a 30 gauge wire.
Which is better Kanthal or nichrome?
The benefits of Kanthal are it is more sturdy, it can take more heat, and a lot of people find it easier to wrap with because it stays in place better. Nichrome 80 heats up faster, loses its heat faster, and doesn't contain iron.
Which is better Kanthal or Clapton?
Clapton coils are usually made from Kanthal and it's all about the style of the coil winding. Claptons are more complex from the wiring point of view and have a wider area of wiring. As this means more contact with the e-juice, it can also vaporise it better, being more efficient.
How can I make my vape juice taste better?
The 10 Best Ways to Enhance Vape Juice FlavoursChange Your Wattage and Temperature. Just like any reaction between heat and flavour, temperature affects how things taste. ... Avoid Vaper's Tongue. ... Proper E-Juice Storage. ... Limit Airflow. ... Get A Good Atomiser. ... Below-coil Airflow. ... Get a Narrow-bore Drip Tip. ... Keep Everything Clean.More items...•
Is fused Clapton good for flavor?
Clapton: Clapton wire is composed of a thinner gauge wire that is wrapped around a thicker gauge wire. This increases the surface area of the coil which results in enhanced flavor and bigger clouds than a standard round wire build.
Is Kanthal toxic?
Kanthal is safe to heat up to high temperatures but it's questionable whether it's safe to then inhale directly the fumes that come off it. many people make spaced coils so don't need to glow them, and just bin a coil and wrap a new one when it gets gunked.
What is the best Kanthal wire for vaping?
Best Kanthal Wire for VapingPure Atomist 32g Kanthal A1 Wire. Pure Atomist has been around since 2014 and is one of the leading vape wire distributors in the United States. ... TEMCo 28g Kanthal A1 Wire. ... Master of Clouds 22g Kanthal A1 Wire. ... Master of Clouds 26g Stainless Steel Wire. ... Pure Atomist 28g Stainless Steel Wire.
Can you use Kanthal in TC mode?
Ni, Ti and SS coils are compliant with temperature control but not Kanthal. The reason why Kanthal does not allow temperature control is because this FeCrAl alloy has much more impurities than any others and does not offer superconductivity properties (a linear relationship of resistance with temperature).
What is the easiest vape wire to build?
Vandy Vape wire is some of the easiest vape wire to build with. It’s effortless to shape and make coils with because it bends easily and stays in the shape that you build it to. Vandy Vape wire is super clean and it heats up evenly so the flavor that you get from your ejuice is always pure.
What is geekvape wire?
Geekvape Wire. Geekvape wire is durable and easy to work with. Their high-quality wire retains its shape when heated and comes in a variety of materials like kanthal, stainless steel, Ni80 and Ni200. Geekvape wire is a prime choice for those seeking clean and pure flavor from their ejuices. CHECK PRICE.
What is juggernaut wire?
Juggernaut: Juggernaut wire is composed of flat ribbon wire that is wrapped around two clapton wire cores. This results in a flavorful vape due to the extremely large surface area that absorbs and vaporizes ejuice, but slower ramp up times than if using clapton wire.
What is Clapton wire?
Clapton: Clapton wire is composed of a thinner gauge wire that is wrapped around a thicker gauge wire. This increases the surface area of the coil which results in enhanced flavor and bigger clouds than a standard round wire build.
What gauge wire is thinner?
The higher the value of the gauge, the thinner the wire is. As an example, a 28 gauge wire will be thinner than a 26 gauge wire, but thicker than a 30 gauge wire. The gauge of your wire will also affect the end resistance of your coil.
What is Ni80 wire?
Ni80 is an 80% chromium and 20% nickel alloy. Ni80 is less common than kanthal or stainless steel wire but it’s recently been seeing increased use for its clean flavor and fast ramp up times. It’s also easy to work with and holds its shape nicely. Nichrome contains a lot of nickel and so it’s prone to melting if you aren’t careful, but as long as you pulse your ni80 coils slowly and at a low temperature you won’t have an issue. Ni80 can only be used in wattage mode.
What is stainless steel wire?
Stainless steel wire is a chromium, nickel and carbon alloy. It’s unique among vape wires because it’s the only wire that can be used with both wattage and temperature control mode. Stainless steel wire comes in a variety of grades but SS316L is medical and food grade and thus the most popular type used for vaping.
What is the best wire for vaping?
Kanthal Wire. Kanthal is the OG and the first wire that started it all. This is the most commonly used wire for vaping, and it has been recognized for more than a decade now for producing high quality vape coils, both by amateurs and industry professionals.
How many types of wires are there in vaping?
There are five common types of wires in the vaping industry. These five materials have distinct differences from one another. These differences are based on temperature control mode and wattage mode. One certain wire can even be used in both modes.
What is the TCR of nickel?
If you are a dedicated vaper, you’ll know that nickel was the first wire used for temperature control devices. Because of that, this wire has a nice TCR of 0.006, which means it’s easy for devices to determine the amount of current needed to maintain and when to cut it off to reduce the risks of overheating.
How hot can a wire be before melting?
This wire can also tolerate very high temperatures of up to a astonishing 1,500 °C before it actually starts melting. This wire is preferable for beginner rebuilders because not only is it easy to use, but it is also good for beginner-friendly single coils that are not difficult to build.
What is VW vaping?
Wattage vaping, or VW (which stands for variable wattage) is the standard mode of vaping. This allows you to independently set the wattage at which you want your vape to operate. You should be looking for a wire that doesn’t change resistance when heated up if you choose to go with variable wattage mode.
What are the two ways to vape?
There are actually two different approaches to vaping — the wattage mode and the temperature control mode. Both differ in a lot of ways; not every wire can be used in these modes! Never manipulate your tank if you don’t know the difference between these two because you’re only risking the battery, or worse, poisoning yourself. Be careful!
Is 30 gauge wire slow?
Thus, a 30 gauge wire can have a very fast ramp-up time, while a 22 gauge wire can have a slower one. As I have mentioned, every wire behaves differently from one another. Some wires are extremely difficult to coil and handle.
What gauge wire is used for Clapton coils?
Some of the most common gauges used for single-strand coil builds are 28, 26, and 24, and thinner wire used in the exterior of Clapton coils is usually between 40 and 32 gauge. There are others of course, and even odd number gauges.
What wires are used for power mode?
Most vapers prefer power mode: it is just simpler. Kanthal, stainless steel, and nichrome are the three most popular power mode wires right now, and you might be wondering what would be the best one for you. Again, take note that if you have (or suspect you may have) a nickel allergy, then you should not vape on nichrome coils, ...
What is wire gauge?
Wire gauge. The first basic characteristic of any wire is the actual diameter of the wire. It is commonly called the wire “gauge” and expressed as a numerical value. The actual diameter for each wire isn’t really important. What matters is that as the wire gauge number increases, the wire diameter gets smaller.
What are the characteristics of wire?
These are the diameter (or gauge) of the wire, its resistance, and the ramp time of different materials.
Can you use nichrome wire for vaping?
Nichrome and stainless steel on the other hand are excellent power mode wires for vaping at lower resistances—that’s not to say that they can’t be used for all kinds of inhales. And while flavor is very subjective, many vapers that try nichrome or stainless steel swear that they get better flavor than they did with their previous Kanthal builds.
Can you vape with nichrome coils?
Again, take note that if you have (or suspect you may have) a nickel allergy, then you should not vape on nichrome coils, and maybe you should also avoid stainless steel. Kanthal has been the choice of most vapers for a longer time, due to its ease of use and higher resistance.
What gauge wire is better for resistance?
For example, a five-wrap 2.5 mm ID coil made out of 28 gauge Kanthal will have a higher resistance than a stainless steel coil with the exact same specs. This is due to the higher resistance of Kanthal compared to stainless steel.
What is the best coil for vapor?
2. Fused Clapton Coil. Arguably the most popular coil at the moment because of its easy build, the Fused Clapton coil can offer you better vapor and outstanding flavor. As its name implies, it has a thin gauge Kanthal wire wrapped around two or more thick gauge cores.
How to choose a vape coil?
When choosing the best vape coil for flavor, you need to first consider its heat time (the time it takes to heat) and building material (type of wire used). Only after that should you focus on how it looks. Having the right coil will make a world of difference in your vape (flavor) experience.
What does an alien coil look like?
The Alien coil looks much like the Fused Clapton, differing only because of its distinct texture as a result of a unique wraparound of the outer wire over the cores.
Can you wrap ribbon wire around Kanthal?
Now, wrap the ribbon wire around your Kanthal and you’re good to go. Now, flat ribbons, though excellent at producing outstanding flavor, need a long time to heat up on their own. To counteract this problem, we need the twisted 32 gauge on the inside, offering intense heat in record time.
Can hives be used for DTL?
Hives, like most of the options for flavor on this list, are low in resistance. Hence, they can not only be used for DTL vaping, but also MTL vaping. Plus, though they ramp up fast, they aren’t as quick as round wires.
Why do hive vapes have spaces?
The Hive, twisted and turned to increase surface size, has many spaces to allow flavor from the e-liquid/juice to pass through, allowing for more flavor. However, bear in mind that the spaces can cause spitback at times, though some vapes have a special drip tip to prevent this.
What is a tiger coil?
A Tiger can be best described as a twisted coil that features one flat ribbon strand and a round strand. With the wires shaped differently and twisted to offer more grooves and pockets, you can expect the coil to generate more heat than your regular twisted coil and thus produce denser, better hits with flavor.
What is the best wire for vaping?
Stainless Steel Wire. The only vape wire that can pull double duty (work in both wattage and TC modes) is the stainless steel wire. It’s perfect for vapers that haven’t made up their mind between TC and wattage mode or fail to check the modes they’re firing in regularly.
What is the most toxic vape wire?
The most controversial vape wire on this list is definitely the titanium wire. It’s a scary one because it does, in fact, release titanium dioxide (which is toxic) when heated over 1130F.
Can nickel wire be used to make graphite?
Namely, nickel wire can leach and, at high temperatures (above 600F), can produce graphite, which is why some vapers are concerned about getting graphite lungs (a debilitating condition sometimes seen in people overexposed to graphite, usually pencil factory workers).
What is the TCR of a nickel wire?
Nickel, also referred to as Ni200 (pure nickel), is the first wire used for temperature control. It has a TCR of 0.006, making it fairly easy for most chips to read and regulate. Ni200 should only ever be used in TC mode because of concerns of overheating and melting.
What is SS wire?
Stainless steel wire comes in various grades (410, 413, 316, 316L, 430, 304, and so on), which adds to the confusion a bit and makes it seem as if various vapers are either singing praises or talking down the same type of wire. Some grades of SS wire contain almost no nickel (SS is an alloy composed of various parts of chromium, nickel, ...
Can you use Nichrome wire on a vape?
Also, some people suffer from a nickel allergy and should avoid using NiChrome wire. NiChrome is a decent vape wire that experienced vapers use with ease. It’s a bit more difficult to find in local vape shops, but most online sellers will have it in stock. One thing to note – while.
Can Kanthal wire be used for temperature control?
Kanthal wire can’t be used with temperature control
What wires do you use for vaping?
Most tank manufacturers have a pretty wide choice when it comes to premade coils - with the exception of Ni200 (and sometimes NiChrome), you will be able to find atomizers with Kanthal, SS, and Titanium wires for most of your tank purchases.
What is Kanthal vape wire?
Kanthal is ferritic iron-chromium-aluminum alloy - it’s a mouthful, right? It doesn’t really matter if you can’t pronounce it, what you need to know about Kanthal is that it’s a great starter wire. It was among the first vape wires in use and it can still hold its own, even with the appearance of (supposedly) better wires out there.
Can you fire a TI wire over 40 W?
If you use them correctly there’s no need to fear poisoning or fire. To be on the safe side, don’t fire Ti wires over 40 W and you should be golden.
Is titanium bad for vaping?
However, there are a few downsides to using titanium. Most vapers agree that the wire is springy, which means that it’s difficult to work with and doesn’t hold the shape that well. Then there’s also the issue of titanium poisoning. When heated above 1200 F, Ti releases a compound called Titanium Dioxide, which is toxic and carcinogenic to humans. Also, Titanium catches fire pretty easily.
What is titanium wire?
Titanium vape wires are all the rage now that temperature control mode has been perfected. These wires are made of pure titanium and vapers who tried them swear by the flavor. They call it ‘fresh’, ‘pure’, and ‘popping’. So there you have it - if you’re looking for the ultimate performer, flavor-wise, your best bet might be a titanium wire. Another selling point of this wire is that it heats up and cools down quickly and its ramp up time is similar to that of the Kanthal wire.
Can you use Ni200 in vapes?
However, it doesn’t hold shape very well. After a few wick changes, it’s likely that the Ni200 wire will become completely deformed and will need to be changed. All in all, with so many options out there, there is really no need to use Ni200. If you insist on it, make sure to read up on nickel and check whether or not you’re allergic to it.
Can you build your own coils for vaping?
As you get more involved in the vaping world, you will start to learn that certain practices can make your vaping experience more enjoyable - and cheaper. One of those is building your own coils. Many vapers who decide to do that become aware that there are several types of vaping wires. Some of those wires are used with wattage vaping, some with temperature control vaping, and some can be used with both.
What is the best vape wire?
Stainless Steel is a special vape wire that can be used with either wattage or temperature control mode, and is a chromium, nickel and carbon alloy. While stainless steel comes in a variety of grades, 316 is medical and food grade and is perfect for vaping.
What is the best wire for vaping?
Nichrome Wire. Nichrome wire is another great wire that can be used for vaping, and is a nickel and chromium alloy. While less commonly found in stores than kanthal, nichrome is similarly resistant to oxidation and can function at high temperatures without being damaged.
Can you use Ni200 wire in temperature control?
While nickel wire can offer better flavor and a faster ramp up time than some other vape wires (such as kanthal), it should only ever be used in temperature control mode. If nickel wire gets too hot and overheats, and you can end up with nickel or even graphite in your lungs. Never use nickel with wattage mode, only with temperature control mode. Those with a nickel allergy should obviously avoid using Ni200 wire.
What is Ni200 wire?
Nickel wire is also referred to as Ni200, and is made of pure nickel. Nickel heats up the fastest out of all vape wires and was the first wire used with temperature control mode. Because of its soft and springy nature, nickel wire is harder to work with than kanthal or nichrome. While nickel wire can offer better flavor ...
Is stainless steel wire a good heat source?
Stainless steel will heat up very quickly, and has a faster ramp up time than kanthal or nichrome wire. Stainless steel is also very easy to work with and will hold its shape nicely. Like nichrome, stainless steel contains nickel, so those with a nickel allergy should avoid using it. Stainless steel can be used with either wattage or temperature control mode.
What is the most common wire used for vaping?
Kanthal is the most common wire used for vaping, and is a ferritic iron, chromium-aluminium alloy. Because of its inexpensive price, wide availability, and resistance to oxidation kanthal is a great material for building coils.
Does nickel reduce current?
Your mod uses this information to regulate the current to the coil as it heats up and will reduce the current to the coil if it gets too hot, in order to keep the coil at a safe operating temperature .
Eskie ECF Guru Verified Member ECF Veteran
I'm assuming you're talking about building your own coils. For flavor at low wattage, Kanthal is certainly going to be the easiest to build with. As to the metal affecting the taste itself, I never noticed much difference between SS and Kanthal, but never tried Ni so can't comment.
Tonkpils Senior Member ECF Veteran
I find with stainless steel I get better flavor but I prefer to use 22g/24g kathal for its sturdiness and ease of use.
MegaVaper Senior Member ECF Veteran
Ive got stainless in the mail. I hear nichome and titanium are hard to re wick and clean and dont last very long. I want flavor as well but I don't want to build a coil every time i need to re wick.
disley Senior Member ECF Veteran
Ive got stainless in the mail. I hear nichome and titanium are hard to re wick and clean and dont last very long. I want flavor as well but I don't want to build a coil every time i need to re wick.